1889 modeli
Cut perfect outside radiuses with your router and these templates. I offer several versions with different radiuses. The jigs have integrated T-slots, so you can fix them with fastening clamps like the Festool FSZ 120 or FS-HZ 160 to your…
Wydruk około 4,18 €–5,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…
Wydruk około 9,25 €–11,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena jednego wariantu
ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Transforms your Einhell Single-Blade Trimmer into a string trimmer. Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear. Printing Choose an…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Replica of the baseplate of the Makita trimmer base 196613-4. As far as I can tell, it is not possible to buy the base plate as a separate replacement part, you have to buy the whole unit: Makita (German):…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
You can either print as 2 separate parts with 1 very small support on the part that goes over the track, or print as 1 part. The 1 part will take more support and more time, is also not printed in the strongest orientation. For 2 parts…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Jeep Grand Cherokee's often have a small issue with the material around the cup holder. This trim is coated in chrome and becomes very sharp when it peels; damaging or at least marking whatever is placed in the cup holder.…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
A replacement head for the Einhell Trimmer GC-CT 18/24. It replaces the original single-blade-head with a multi-blade head. (The provided .stl files only have three blades, but you could go with more by editing the .scad file, or using…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
This cover is located on the top edge of the tailgate door trim on Mercedes-Benz W124 estate/wagon/kombi models. The plastic gets brittle with age and the latches brake off. I've printed mine from PETG to allow the part to flex a little.…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na holící strojek Philips MG7720 s možností připojení nabíječky. Vytištěno s tryskou 0.6,…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Supports: No Infill: 10% Rafts: Doesnt matter
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Designed using Fusion 360 from the original clip. I then printed a prototype that fits and works perfectly from the first time. It's now installed on the wheel-way trim of my Hyundai Kona I printed it in PETG using standard PrusaSlicer…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this guiding tool, the trimming process of your tufting projects is significantly simplified, allowing you to achieve even and clean cuts effortlessly. Based on your experience, adjustments can be made at any time to further optimize…
Wydruk około 5,38 €–6,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jeep Cherokee XJ 1 gen 2door seat trim around lever that fold seat - the crack after time best to print vertical with only neccesary organie supports as in Gcode attached, fits both sides - the same PETG Prusament - urban grey, fit the…
Wydruk około 1,88 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a very simple trim that will hide the screw holes when converting from an old Truma CP to the new Truma Inet X panel. This trim is 1.25mm thick, 124mm outer width (inner hole width 108mm.) Outer height 97mm (inner hole height…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
The door handle trim on my BMW E28 broke so I created this 3D printed replacement. I know this part is still available and cheap but I wanted to practice my 3D modeling and printing skills. This is a replacement for BMW part number…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Haar-Trimmer-Aufsatz 12mm, passend für Carrera Classic Modell 22163903 Art. 5835
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…
Wydruk około 6,53 €–7,98 € nettoWstępna wycena jednego wariantu
A fun little sculpture for holding rings which includes six channels for sliding in short strands of filament to trim out the look after it's been printed. Included are a couple of little chamfered hearts that you can use to further…
Wydruk około 2,35 €–2,88 € nettoWstępna wycena jednego wariantu
This wall mount is designed for the Philips Nose trimmer Series 3000. The locking mechanism is designed for easy handling and good grip. Various holding options are built into the back. In addition, the surface is large enough that the…
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
Ersatz für die rechte Endkappe unserer Arbeitsplattenabschlussleiste. Die Skizze ist ähnlich, der innnere Aufbau etwas anders. Translation: DeppL Replacement for the right end cap of our wall joint trim. The sketch is similar, the inner…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can find it here with the part number D651-68-162A. Doesn't look exactly like in the catalogue, as mine one has the little “tail” separately, but I think it should be compatible. Also, most probably compatible with many other Mazda…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is for the Aqara Door & Window Sensor (affiliate link), and helps you level the two pieces inline with any door or window trim. My door has a ½ inch trim that frames it, and makes it not possible to keep the two pieces of the…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Connector to attach a trim router table to the Shaper Workstation . It has an indent to hang the table on french cleats. See that project for bolt and knob needed to complete the project.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
OneReach – Adaptive Back Grooming Extension for Philips MG5720 Achieving thorough back grooming is often a challenge – especially for individuals shaving alone or those with limited mobility. OneReach is a foldable, modular extension arm…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
These Concealed USB Cable Trim Rings (2 sizes) are used to hide drill holes when concealing a USB cable in the wall . They were designed for use with Ring Indoor Cameras , but they can be used for any application where you wish to improve…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a square base that I made for my Performax trim router. This is a store brand for Menards home centers. It looks identical to the Makita RT0701C, so it might fit that router as well. I included the technical drawing that lays out…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This collection features 3D printable corner connectors designed for wall, floor, and kitchen trim profiles. It provides an easy solution for connecting profiles seamlessly at both 90° and 135° angles, with options for both inside and…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not 100% accurate (scale and shape) because the models were made from photos. PRINTING MATERIAL AND POSITION IS IMPORTANT! I printed them in ABS. PLA may not be the best choice, my second choice beside ABS would be PETG or something…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
This clip fits between the trim panels on your car's dashboard to guide a dash cam cable. Design features This has an opening for a 4 mm wire, and is designed to be printed in flex material to make sure it doesn't vibrate or cause…
Push pin style clips. An assortent of 6, 8, 10, 12 mm diameter posts. Can easily be adusted during slicing by scaling x/y or z axis for inbetween customized sizing. Probably can print with any plastic but something like petg will provide…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
Basic trim removal tool set used commonly for working on vehicles. I printed mine in PETG PRO with extra top/bottom layers and extra walls to increase strength. I would recommend adding a brim so they don't come unstuck and using supports…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Remix to fit my EGO string trimmer better. The original mount worked well for a trimmer that had a round shoulder, but this fits better with trimmers that have a rounded off square shoulder.
My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…
Inspired by the PS5 Controller, this grip is super comfortable and fairly easy to take on and off. Print in a more flexible and fatigue resistant material such as PETG, Nylon, etc. as the top clip needs to flex to take on and off the…
Really useful tool for every furniture crafter out there. The tool is modular with different heads for different radii . The adjustable trimming depth makes it versatile for different projects, whether you’re fixing up furniture or…
For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Updated to change print orientation along the diagonal axis and extend diagonal brace into holder cup for greater strength. Can also be printed along top axis with some support. Also fits EGO Power+ Powerhead PH1400 Printed 0.4 nozzle, 4…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Few different foot options for the spinner. The bearing is a 6202z. Use a shielded bearing as clay is less likely to get inside it. Bearing Link: https://amzn.to/3dmfFt0 including STEP for you to modify to your liking.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Designed for the Apache 2800 case, for one Polk DB692 DB+ Series 6" x 9" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x8mm screws.…
These are for TPU only, they don't work well with hard filaments because they are completely ridged if you don't print TPU. These are very robust and will fit most vehicles. I have a bunch of sizes and you can mix and match and just print…
An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
These small pry tools are designed to help you remove plastic trim pieces from your vehicle without causing damage. Using these tools can ensure that the trim pieces come off in one piece. There are two versions of this tool: one with a…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
A simple line trimmer holder - mine was made for a stihl, but it would suit a bunch of others. I printed mine in a basic orange PLA and it has held for over 6 months with a straight shaft trimmer on it with no dramas.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Snap-fit closure for ESP32 board, with pins available for prototyping purposes. This remix of the existing model removes the material between the pins inside the box. Printed beautifully using Inland PLA+ with a 0.5mm nozzle at a 0.28…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 4th Dec 2022: MMU version is now available. Look under Files for the 3MF file :) Thanks, Jon ! ---------------------- 4mm thick to ensure stability The model will fit on…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Christmas Door Trim Corner - Santa claus🎅 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…
Holders for OPT1845 2 pcs OPT1845 31mm Holder 1 pcs OPT1845 Holder for OHT1855R 1 pcs OHT1855R ensure enough perimetes. i used 5 for OHT1855R and OPT1845
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Simple hanger for your brushcutter. Tested for echo srm-222es. Printed in PETG at 20% infill No supports needed if printed in default orientation Needs 4 screws for mounting
I like the idea of JMAW's Edge Banding Trimmer . Unfortunately it did not work that well for me. I wanted a model, where the blade can be fixed directly to the model using some screws and nuts, instead of having a clamp. Because in the…
Holder for Ryobi trimmer Print instructions Print in PETG or PLA.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
18AUG22 Update - Uploaded .243 Win and 7.62x54R bushings 11NOV21 Update - I just uploaded the 6.5x55 Swedish and .22-250 Remington bushings. I've also uploaded a generic .dwg of how I design each of these bushings (6.5x55S is in this…
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
🌟 Enjoyed this 3D model? Share your creation! 🌟 If you’ve printed and loved this design, I’d be thrilled to see your make! Post a photo so I can celebrate your creativity. Your feedback and support inspire me to keep designing more…
Christmas Door Trim Corner - Gingerbread🍪 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Replacement inner door trim clips for a Nissan NV3500 (and probably other Nissan models). I made two variations, one with thicker clips, and one with…
Modified to print without supports. Remove web after printing Category: Hand Tools
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Noticed that whenever you print the enclosure your alway left with the bottom part below the door being black and not matching the rest….. So I gave quickly designed a bottom trim to go over it, I did recess some holes into it for magnets…
I bought recently a Einhell GE-CT 18 Li cordless grass trimmer. So here's blades for it. Might fit other trimmers too, Bosch blade looks identical. Red blade is original, blue one is printed. Print Settings Printer Brand: Prusa Printer:…
Christmas Door Trim Corner - Snowmen⛄⛄ ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Christmas Door Trim Corner -Reindeer🦌 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Milwaukee M18 Hedge Trimmer wall mount. I mounted them with #8 wood screws. Added a version that is mounted with a packout cleat remixed from:…
Needs printing with supports.
Sturdy wall mount for a DUX60 Makita trimmer. I modeled this around my specific machine and you may need to scale it up to make yours fit properly. Mount it with 3" to 3.5" #8 construction screws. Make sure you get the screws in a stud.…
