Liczymy pasujące modele…
I accidentally bought a bulk pack of Melitta #2 filters that didn't fit into my V60 coffee funnel. So, instead of wasting the paper, I created this template to help me consistently fold the filters in a way that fits well into the V60's…
The V60 Kasuya Model (KDC-02-B) is a modified V60 ceramic coffee dripper created to celebrate the winner of the 2016 Brewers World Cup, Tetsu Kasuya: https://www.hario-usa.com/products/v60-ceramic-coffee-dripper-kasuya-model This…
I wanted a little filter holder for my Hario V60 coffee filters, and needed something different from what I could find here. My design criteria: horizontal access to filters (will be located in shelf inside cabinet) slightly angled to…
General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. The NSU Ultramax camshaft drive operates with 2 push rods, which rotate on eccentric disks. Details you can find here:…
V60 Coffee Filter Stand This V60 Coffee Filter Stand is a detachable holder designed specifically for V60 cone filters . With an angled frame , the stand supports the natural curve of the filters, keeping them neat , upright and easy to…
Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if…
Printing The cylinder head is very detailed and could cause problems on some printers. In that case please use the “simplified” version of the cylinder head. The Cylinder Head is printed with support. Beware of seams on axles and…
I'd recommend to print it vertically to avoid any unnecessary bridging/supports. Use a tiny bit of double-sided sticky tape to fix it in place.
I have several coffee filters that were never neatly stored in the cupboard.Therefore I have designed this holder. Attention! Despite several adjustments of the Brim/Mouse ears on the side, the pressure did not stick to the sheet all the…
A simple but elegant v60 paper filter holder for 100 size 02 Filters. I've included the signature emboss on the paper filter into the design. Looks great, good tolerances and fits the purpose.
I wanted to organise all our office coffee equipment and accessories, but I couldn't find any good existing solution. So I made my own using gridfinity system! I will be adding new models as I finish printing them so I know they are ready…
White text on the final print: Lasering. Parameter setting: Whatever Support: No
This is a holder/stand for v60 coffee filters. This is the first thing I've designed/modeled/printed. If I were to print another, I'd make it about 1-2mm longer. The filters I use are about 133mm long Print Settings Printer: Voxelab…
A holder designed for Hario V60 coffee filters. It holds up to 100 filters and allows for easy, single-filter extraction without disturbing others. Designed for reliable printing without supports or brims, this single-part model requires…
Simple holder for Hario V60-2 filters. Prints without support. No glue is required for assembly. Print Settings Rafts: No Supports: No Resolution: 0.3 Category: Kitchen & Dining
Print in PETG.
I designed this drip tray for my Hario V60 filter. It is for the 2-3 cup version of the V60. The Aeoropress also fits in it without any problems to catch the dripping after the brews are finished. I printed it in 0,2mm PLA. But PETG could…
A remix of cudderbup's design over on Thingiverse. I've uploaded different versions / heights to find the best focus for you scanner. I'm using the 0.6 mm Version with ANR glass on top of the negatives. To use it without the ANR glass, a…
A simple remix of whoppingpochard 's Hario V60 filter holder to fit size 03 filters. Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order you…
An holder for Espon scanner V600, for 126 format negative film. Design with DesignSpark Mechanical (Free software)
A V60 compatible funnel designed for direct attachment to a standard 2L PET soft drinks bottle for creating cold brew. Inner funnel leads directly to bottle, outer ring house screw thread to mate with bottle. Should be leak free. Printed…
This holder allows scanning of 4x5 negatives on the Epson V600 scanner (as well as similar models like V550). I copied the dimensions given in this reddit comment: https://www.reddit.com/r/largeformat/comments/eha6mw/comment/fqynpni Also…
Edit: You may want to use this model instead, because I've since tweaked it a bit to include some support at the bottom of the negative to keep curved bits flat, among a few other things. I'm keeping this one up in case they'd rather use…
Coffee Filter Holder Brand: Hario V60 Variant: Size 02 Capacity: 100 sheets V2 fixes the thumbhole position so it better aligns with the filter tab. Printed with Polymaker Polywood PLA
☕ Enhance your brewing experience with this 3D-printed mold designed to give your V60 coffee filter the perfect shape . Its precise design ensures an ideal fit in the dripper, prevent folds and bypasses to ensure even extraction. This…
Scan your APS film with this film holder for the EPSON V600 Scanner. You can scan 2 strips of film in one go. Top part is clamped to the baseplate with 18pcs of 3x1mm Neodymium magnets. Also available for Instax Mini and Polaroid film.…
Redesigned version of the “Coffee filter holder”. Remix of this filter holder features a slimmed-down base with removed writings Second V60 slot designed to accommodate (02) filters Aeropress filter slot that can accommodate multiple…
Made this model for a close friend that has an v60 plugin hybrid. After few tests this is my final design. Made as a beginner in Fusion 360. volvo charging cable for trunk 2 is longer foot for better grip inside the hole ( in the back of…
My wife was upset about V60 filter holders available in market so she asked me for one. Since she thinks it is more practical to take filters from top rather than pulling it, it came out in Aeropress style filter holder. It can hold about…
I made this with HTPLA that I annealed in the oven to make it withstand boiling water. I'll upload another version (arguably better) to work with PC. Consider coating with something to make it more food safe. Print 100% infill **The…
Collapsible V60 Coffee Dripper for taking your joy of brewing everywhere! Compact size yet still elegant design!
This is an ultralight, ultra thin (0.45mm) coffee filter holder. I've made it specifically for printing in PC to keep it as light as possible yet hold up to the boiling water temperatures. Print with either 3 layers at 0.15mm layer height…
Coffee dryer for filter from Hario V60. Fit well for V2 filter. Printable without support.
This is intended to nicely display V60 filters in a countertop coffee brewing area, making them easily accessible without being an eyesore. I suggest printing with a fairly high infill, 20% or more, to weigh down the base portion.
Simple Hario V60 01 Drip Tray. Should fit snug but can be easily resized to e.g. 100,2% in Prusa Slicer to make looser fit without modifying the model. Printed in Prusament PETG Galaxy for better heat resistance. No support needed.…
Introducing the Fluted V60 01 100 Sheets Holder, the perfect accessory for coffee enthusiasts who value style and functionality. This 3D-printed holder is specifically designed to store and organize up to 100 V60 01 coffee filter sheets,…
3010 fan mount modeled after the OEM 2510 mount. Modified to suit my needs and providing the step if you need to customize for your printer. Use two 2.5x12mm screws to install the fan in the mount (will not protrude through the face if…
How to Use Line up the stencil's right edge to the right side of the filter, left point to the left edge of the crimped filter. Make a crease. With the stencil still in place, cut along the curved edge. Use'N'Brew
Paper holding inner part for V60 01 filters. For outer shield use files from original project.
The OEM film holders for Epson scanners are rather flimsy, and one might not need / want / have the money for expensive after-market holders. So when I broke my 135 film holder press-in insert, I just modeled a new one. Hope it might be…
Container with a Lid for a V60 SIZE 1 paper filters I wanted a box with a lid so the filters don't get dirty while not in use and i designed one BONUS: Box fits more Filters than a single bag (100), so you don't have to wait until you…
This filter holder enables the use of a pour over set up with the moccamaster drip coffee machine. The holder centres the filter underneath the hot water dripper and is usable with different types of pour over holder. Ive used it…
I really liked the original design by ‘whoppingporchard’ but I always have filters in both 01 and 02 size, and two seperate holders would seem to take an unecessary amount of space. So I tried to recreate the orginal design but combining…
I design my own coffee maker with wood, copper pipes, glas funnel and 3d printed fittings. The conclusion of all of this was that I also need a custom stand for the V60 Filters I am using. So I did a fast one on this one. It's simple, can…
I had this idea of mounting the Hario V60 Drip Scale (VST-2000) under the shelf where I keep my coffee and filters to save on cupboard space. Works flawlessly! Glued together with gel cyanoacrylate glue, and placed under the shelf using…
Uncomplicated holder for V60 size 02 filters Should be an easy print in less than 60g of PLA. It has three spaces, each 15mm in depth, each space should hold 40 filters, so 120 paper filters in total.
The updated spool reduced the sharpness of a cable bend. You can use this spool for organizing cables, earbuds, and other cables. This model is without supports. Thanks for comments :-) I printed in PETG, 0.20 mm. Other materials will be…
A nice, basic and minimalistic coffee filter holder utilizing T-Clips. Print it standing up with two clips.
Pretty solid and tight fit. So the V60 won’t fall over while pouring. The adapter fits mugs with a diameter of 75mm or more. Category: Kitchen & Dining
A basic model that fits snugly into the cavity right before the cupholder. The height allows the model to lock itself under the lip of the cavity and not wobble. The model has 3 pockets, one of which holds the key fob, the middle one…
I got really annoyed by the extra droplets of coffee coming after brewing with my V60. This solved my problem.
Shopping bag hooks which connects to the unusable trunk hooks of Volvo V90 / V60 This is a modification of the original Snap On version. It is easy to me to take on and off the hooks. I have printed these in PETG using the 0.15mm…
Parameters of note in the f3d file include: Holder depth - 2 inch by default (for 100 filters). Wall angle - 40 degrees for Melitta, 45 for V60. Holder top width - Width of the holder at the top, 6 inches by default. Adjusting these…
This is a coffee dripper holder for HARIO V60 glass dripper. The specialty of this holder is: -The locking nail tightly hold the neck of the V60 dripper. -The rim of the plate hooks glasses or pots lightly. -The diameter of the plate is…
Simple holder for V60 filters size 01 and 02
A drip stand for a V60. Designed to fit mugs between a diameter of 82mm and 99mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Any PLA Category: Kitchen & Dining
Hier handelt es sich um eine Aufbewahrungsbox für Kaffeefilter der Größe V60. Achtung: Auf den Fotos sind Filter der Größe 4 abgebildet, da ich die original Größe V60 nicht für das Foto zur Verfügung hatte.
Tired of unfolding your filters and trying to get them settled into your V60. Store your V60 filters in their unfolded state so you're ready to make great coffee at a moment's notice! This holder will hold as many filters as you dare…
This is a Hario 01 size coffee filter holder, based on a model by Ilutart. Their model is perfect for size 02 filter papers. I reduced the width and height of the model to about 80% to keep the proportions intact. The depth remains the…
Coffee filter holder for drawer. Hole to screw into corner
Protein model downloaded from : https://www.rcsb.org/3d-view/4V60 Authors: Kato, K., Zhou, Y., Tanaka, H., Yao, M., Yamashita, E., Yoshimura, M., Tsukihara, T. Converted to STL with https://imagetostl.com/convert/file/glb/to/stl#convert…
Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…
Inspired by poom3d's Conical #4 Size Coffee Filter Holder, i've created this one to hold my Hario v60 #2 paper filters. I used 1,5mm wall thickness and made it 42mm wide inside to hold 100 paper filters. Print notes: Nothing fancy here,…
I wanted a case to take my filters with me in the camper van. So, inspired from the original model I made a version for the smaller 01 filters I've added some cutouts to glue in magnets (4x1mm) which helps the case stay closed. The…
Volvo V60 is a great car, but the absence of any holder for proper water bottle drives me mad. Fortunately there is nothing that cannot be fixed by 3D printing. Therefore I have designed a simple holder to fit a 1l or 1.5l bottle. The…
If you're a Weird Coffee Person like me and you have your v60 sitting on a countertop or shelf waiting for you to use it the next time, I bet you already thought about having a lid for it. I designed this lid to keep dust out of my v60…
This is a drip tray and holder for the Hario V60 02 Ceramic coffee dripper. The idea was to collect drips off the dripper after rinsing and serve as home spot fort the V60 in my coffee corner. It prints and assembles in 2 parts for easy…
A simple holder I made for holding v60 filters. Is sized to hold ~40 size 02 filters. Assembly: Print all pieces, remove supports if used, use super glue to attach sides to holes in base. May need to slightly file down pieces depending on…
Use the Arm and Turntable from https://www.printables.com/model/136795-octo4a-phone-holder-to-run-octoprint-on-your-smart This is a designed from scratch model since I could not figure out the original's STEP file to change dimensions.
This part is a replacement for the third row seats hinge cover rotating latch arm designed to fit my long wheelbase V60 Mitsubishi Pajero. It should also fit the more recent V80 models, but I have not tried that. While the left and right…
I wanted a way to hold together different filters that allows easy access to them while keeping them upright. This model accomplishes all the requirements using an adjustable “clamping” mechanism that can be adjusted for any amount of…
This is a modified version of a previous design ( https://cults3d.com/en/3d-model/home/hario-v60-abaca-paper-filter-holder ), so it can be printed with no supports (no material waste!). There are 3 files designed to suit Hario V60 01, 02…
Sometimes you just want more coffee. This is why I got myself a second, larger V60. Life became perfect, until I got annoyed by having two stacks of filters in the cupboard. This holder solved this unbearable problem for me; it might help…
Coin / shopping cart token or RFID token holder for Volvo V60 and X60 model years 2011-2018. The holder is installed using double side scotch tape into the cup holder.
Carburetor Adapter Plate with Vacuum For Kohler SV600-3224 by RebelTaz I swapped engines on a Cub Cadet in my shop without thinking it through first. The original blown engine utilized a vacuum operated fuel pump because the tank was in…
An adapter for a plastic Hario V60 (Size 02, 50mm bottom ring) to fit an IKEA Rikling Teapot with locking mechanism. Link for export or changing things via Onshape:…
Uses a single M5x75 bolt. Mostly because it's what I had on hand, but also because it gave me enough length and strength to use only a single bolt on the model. No supports needed, overhangs are all designed to print freely.
I did not like the look of the standard R-design grilles, so i bought the hybrids version instead. Volvo 2019-2025 Volvo art: R: 32227027 L: 32227026
A bracket with hook to mount the Hario V60 Drip Scale on IKEA SKÅDIS pegboards. It has guide wings that guide the scale to the hook. Super easy to use, no fiddling to find the hook. It uses Skadis T-Nuts for a very solid installation that…
Création de galets sur axe, mise à jour d'une création existante, Modification taille de cône Ajustement longueur
Adjustable stand made for coffee drippers with no rim. Uses silicone O-ring to protect plastic from heat. Parts: lower piece (fits on 130x130mm scale) steel rod (12mm diameter) upper piece silicone O-ring (OD 55mm, CS 3mm)
Vario V60 .02 filter holder. I printed without supports default settings on direct drive Ender 3 pro. User Parameters in the Fusion file will allow you to adjust the height, width, and depth to your needs.
A very simple V60 drip tray specifically for the metal variant which is deeper than the plastic counterparts. Should be simple to print without support or rims. I used PETG but should also work with PLA Don't worry too much about infill.…
3D model of the 4v60 x-ray file from PDB
This V60 holder keeps your brewer conveniently stored after use or washing. A great way to keep your coffee station tidy
V60 and aeropress filter holder whit two holes for magnets d20-D24 ( https://www.alza.cz/aveli-cerny-d5502444.htm ) This holder can fit 40-50 pieces of Hario v60 filter paper. PLA No supports needed
Hario V60 Paper Filter Holder Size 01/02 Coffee Filter Holder
Phone holder, to slide up and underneath the carpet/console on a Volvo V60, Could fit other cars with similar layout, or add velcro to the rear to hold. In the V60, the longer part fits under the center console trim, and I've slid it down…
This is ultralight (24g) dripper for v60 coffee on the go. I printed it in Polycarbonate (PC), it is not exactly food safe, but you don't use it extensively for long periods of time, so I decided that this is safe enough (not medical…
Stand for v60 on top of HyperChiller. I printed it with PETG to withstand more heat.
Here is my take on converting the 3x AA batteries into a dual 1S2P 18650 rechargeable battery for my TRV 604/TRV602 My TRV604 are mounted on Danfoss RA valves. I used around 60 AA batteries in 6 months with these thermostatic valves. I…
Little tool to keep the correct spacing between the V60 characters. Indexes at the corner of the light unit.
A compact and practical storage solution for Hario V60 size 02 coffee filters. This holder is designed to keep your filters neatly organized and easily accessible, making it an ideal addition for coffee enthusiasts who enjoy a tidy…
trunk ventilation panel for Mitsubishi Pajero V60 (my vehicle is made in 2000) NOTE: The original ventilation panel is a bit excentric (which I found after designing it and printing it), so the original membrane doesn't fit into it. You…
This will allow you to hand the Hario V60 scale on the side of the Aeropress caddy from Scoott. https://www.printables.com/model/328222-aeropress-caddy It prints in two parts and does not require any supports. The hook gets screwed on…
Leveraging KYZ Design's recent release of their “H” clips in a standalone, easy to remix format, I wanted to add a convenient 02 size paper filter holder to my HSW setup. Note: This sticks out a lot from the backplate. I'm using it with…
I wanted the ability to hand brew a bigger pot of coffee. Since I already have a Moccamaster I designed a new lid that are fitted with a filter holder. Fits Chemex and v60 filters. Size: 15,5 cm diameter. Not recommended to use PLA, use a…
