Deadpool & Wolverine
Přívěšek z plakátu na film Deadpool & Wolverine.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
- Pobrania
- 940
- Polubienia
- 166
- Ocena
- 5
465 modeli
Přívěšek z plakátu na film Deadpool & Wolverine.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
My 6 year old wanted these for qite some time and there was not any nice model so i made him (pretty) safe pair that should not break easily. Should be printed with supports under claws, placed on the flat part. No post processing needed.…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by the Batman Card Cover by @Kubajz0s_1695954 & @JiriSvejda_1874928 , this is a newly created Wolverine themed card cover with slide system for easy print and tight fit. Very low profile, only 3.2mm thick, 2.2mm added to the 1mm…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Hello everyone, This model is design based on canvas from official poster. I used Fusion360 to make the model. Print is super easy, just make sure that the flat part is on the bed. In case check my G-code. The model on photo is printed on…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x154.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Wydruk około 4,20 €–5,13 € nettoWstępna wycena jednego wariantu
An einem Heizkörper war die Abdeckung einer Bohrung gebrochen. Dadurch konnte man auf den Hahnblock schauen, was nicht sehr schön aussah. Die Öffnung wird durch diese Abdeckung verschlossen. Die Bohrung in der Seitenverkleidung des…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I know other models exist, but nearly all of them have a lip on the top which goes over the knuckle. I'm more fond of the design where the claw just comes out between the knuckles, so I made this. Just plug the blades into the grip and…
Wolverine Inspired Helmet Enjoy New version available at my shop - https://www.cgtrader.com/3d-print-models/hobby-diy/other/wolverine-deadpool-3-movie-mask Category: 3D Printing
Wolverine claws for cosplay or display. Only one claw file. Placement on hand determined by how far forward the claw is on the handle. Recommend testing fitting each claw one at a time starting with the middle claw. July 2024: Added more…
And now Dummy 13 is also a Weapon X.
Here is another cat helmet for all the those daring cat owners. I included two versions in the profile, so you can choose which you prefer. The one that is cut on the bottom will be an easier print, but you do lose some of the look that…
The model is to be printed in 4 parts: 3 claws and the grip, and then assembled and glued. Consider the horizontal expansion setting in your printer to make the parts fit. Dimensions are 21 cm long and 6,5 cm wide. To legally sell PRINTED…
May 24, 2024, V1.1: 3MF file with full set of parts (Bambu Studio/Orca slicer) Multipart hands have been updated Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get…
Sorry for the wrong files last time. Now it should fit a 235 x 235 mm build plate. I would recommend gluing the center rod in place to keep everything from spinning. It's made for cosplay only.
Description Inspired by the new Deadpool Wolverine movie, we made an awesome little figurine where we fused the two of them together! If you sign up on our Patreon , you can also access a painted 3mf version of Deadpool Wolverine for…
Original OEM number 31311139453. Thank you for likes and downloads!!!!
Navy Riverine Command Boat or RCB for short. This was used by the Navy as a Coastal and River combat craft
This is a cool model that I found on Sketchfab from RISD Nature Lab. Please follow print instructions: Keep the model in the orientation that it is set to for ideal print quality. If you don't use the print file, just add tree supports by…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is pair of fun and unique superhero…
I have designed this version inspired by swords and other retractable models. I have noticed that depending on the filament the performance may vary. For example with PLA+ from Sunlu I have better results than with CosPLA from Polymaker.…
Wolverine fanart made for 3D filament printer.
Description LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Rate, 🟠like & comment — it helps keep the series growing! 🔧 Recommended Print Settings: 🪶 Layer height: 0.16–0.2 mm 📏 Line width: 0.35–0.45 mm…
This 3D model is a stylized figure of Wolverine in his signature yellow-and-blue suit as seen in the movie Deadpool & Wolverine . It serves as a great base for any fan looking to create their own display piece. Support my 3D Journey on…
Keychain with design based on the new Deadpool movie. The file includes both parts(both Deadpool and Wolverine). Comes with Loop and without Loop Ideal to share with your friend or your significant other. IMPORTANT: the fit of the pieces…
This 3D model captures Wolverine in his iconic costume in a dynamic battle pose. https://www.patreon.com/c/burina3dmodels/posts Love pop culture, Marvel, DC Comics, and more? Check out my Patreon! What you will find on my Patreon: New…
A awsome pair of claws for Dummy 13.
A realistic bust of Wolverine , capturing the fierce and rugged essence of the beloved X-Men hero. This model highlights Wolverine’s iconic claws, muscular build, and intense facial expression , making it instantly recognizable to fans of…
Hey everyone, first of all, it would mean a lot to me if you could download my model. It truly inspires me to create more. I make these models because I find it enjoyable, and I want to give back to all of you. All my models are…
Logan from Xmen (Marvel universe) remixed to go with Dummy 13 wolverine model. I have not printed it yet. I don't know why It is showing the bottom part weird, but It prints okay. I dint find any problem in Cura. Please do post your…
Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This model was created with this Wolverine png. I used Elegoo Black PLA, Hatchbox Blue PLA, and…
This model is compatible with the lego system.
If you like this kind of style then you should also check my Mini Hellboy, Jason Voorhees, Walter White and Peter from Deadpool 2, Batman... Please support my work by subscribing to my youtube channel www.youtube.com/wekster
More detail at : https://www.thingiverse.com/thing:4919791 As always, I will promote and REWARD the first few people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully…
Happy Valentine's Day! Here's the Deadpool Wolverine broken heart pendant from the Deadpool 3 ad campaign! I am psyched for the movie! Happy printing & maximum effort! Update 7-26-2024 Added models with holes for magnets so the two pieces…
Deadpool & Wolverine Wall Art
halloween is coming! enjoy it with these claws
just repaired the model
Deadpool loves wolverine! With hanger Without hanger
for individual files check maker world https://makerworld.com/models/533287 Supports required. Stay tuned for Deadpool.
Cartel luminoso efecto Neón diseñado para imprimir en impresora de 400x400mm. Las bases se imprimen en multicolor con una sola boquilla haciendo los cambios de color a mano (Los cambios en multicolor son las 4 primeras capas. Para hacer…
Hey thanks for checking this out if you like the figure, please make sure to leave a like and a picture of your creation! tolerances are tight at first but once together they will move as a normal Lego would! Also Check out the Deadpool…
PS5 Front Plate Wolverine Hefesto 3D By Huf424 WILL BE UPLOADING THE BACK PLATES FOR SPIDERMAN AND VENOM THESE DAYS JUST NEED TO SCALE (260*390) TO SEE THE TORN EFFECT YOU WILL HAVE TO LAMINATE AND THE EFFECT WILL APPEAR
Deadpool - Wolverine - low poly wall art, easy to print
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Fun little necklace! Scale X,Y, and Z as needed until printable. Added "Best - Large" and "Friends - Large" with more accurate details and a friendlier size to print. Also added a version that uses 3x2mm magnets to snap together.
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Needed a dustcover for the Wolverine MTW Billet, Forged, and Milspec. This fits in snugly with PLA or PETG
Wolverine Bobblehead using 3DPrinty's spring and base. Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings I have inclused custom supports in .3mf due to chin and…
Hello ! If you like my work, please rate it. My brother repairs coffee makers as a hobby. A regular problem in a Tchibo Esperto coffee machine is that these gears break. Often, aftermarket gears don't last long either. That's why when he…
when you call my name its like a little prayer
After seeing the Lucky 13 articulated figure by soozafone I knew the amount of articulation could be used for a lot of variations. Inspired by his hard work and a dream of owning a Revoltech Wolverine figure, I replicated the head and…
NASA ASTRONAUT WITH MMU (Manned Maneuvering Unit) Artist website: http://www.grueter.com Other 3D Objects: https://www.shapeways.com/shops/grueter Custom Section Category: Art
The regular 3mf files are Bambu Studio specific and include coloring. The generic versions are for people without Bambu Studio. I separately published the CAD files for the M inset into the bottom of the box. The M on the outside of the…
The Hovering Disk is a 3d printed device, which demonstrates almost frictionless motion. The air coming from the balloon is moving through a small whole to the bottom of the disk. At the bottom it is distributed all-over to all sides.…
This is the Wolverine Claws that I remixed. Fixed the seam in the middle of the blades. Category: Scans & Replicas
Claw Shape/Design Inspired By The Wolverine/Logan Films
I used this model to make this photo of Deadpool in The Void. Check it out here:
🦸♂ Wolverine 3D Printable Statue 🐾 A dynamic and detailed 3D model of Wolverine, perfect for fans and collectors! This statue captures Wolverine in a fierce, action-ready pose, featuring his iconic claws, yellow and black suit, and…
Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa per pannelli e coperture Filaments: PETG - ASA - ABS - PLA+ Hardware needed: Screw 3.5x10/12mm for the…
CHIBIT 081: Deadpool (Deadpool und Wolverine) Höhe: 90 mm Teile: 6
Dummy 13 Wolverine Mask and Claws resize 250%
Based on DUMMY 13 V1.0 - Oct. 2024 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/981111 I mixed a Batman head from /model/797452 and a mask from /model/636657 with…
Wolverine Deadpool - wall art, easy to print
Heart charm necklace design Inspired by the new Deadpool & Wolverine movie poster: https://www.facebook.com/MarvelAUNZ/posts/pfbid0232VCVzPAa3c6M3Va8CxGScp4KEsE1DJ6HywyetyChP7DttmCeuNMkUxF6DNh91QYl Print flat side down. No support. 15-30%…
Wolverine model I made a few years back for myself. I was originally going to keep this just for myself, but since I have made it I still haven't seen any good free wolverine models pop up so I have decided to share it. Scale this model…
Unleash the fierce power of Wolverine with this dynamic 3D print. This Hueforge design captures the iconic look and intense energy of Wolverine, making it a perfect addition for any Marvel fan's collection. check out the Hueforge Display…
Recently printed out Deadpool and Wolverine masks and needed a stand. So I put this together. You will need a 3/4 inch wood dowel cut to your preferred length. Plaque - has a notch in it so it can be glued on the base at an angle. You can…
Pequeño Llavero de Wolverine para imprimir en 3 colores con alturas de relieve diferentes para el cambio de filamento. Especificaciones Para imprimir el llavero y que los cambios de color se hagan correctamente la altura de capa debe ser…
print 6 claws and 2 rods for a full set, I would recommend putting some hot glue on the rod, and then slide the claws on.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Get ready for the Deadpool & Wolverine movie with this Deadpool Wolverine Heart done in four colors (see .3mf files). There are two models: the wall decoration and the desk decoration. The desk decoration has a wider base so it will stand…
Check out the updated Deadpool and Wolverine Hueforge 3D print, now with even better color separation and a more vibrant pop! This artistic interpretation captures the dynamic and fierce nature of these iconic characters, featuring bold…
The necklaces pieces are each around 60x30x5 mm. One version has a little slot for 8x2 mm magnets which can be glued in. The model has already built in supports in these slots which you simply can snap of after printing. You need: Silver…
Dummy 13 Wolverine Mask and Claws resize 200%
It's highly versatile; you can use it as wall décor, table décor for the kids' room , or anywhere else. Use it for anything your mind can imagine. Hope you enjoy Hey everyone, first of all, it would mean a lot to me if you could download…
been reading/watching Ragna Crimson, so here's Ragna's siverine sword. split for smaller printers and fits a 1/4 in dowel. Category: Props
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I love agepbiz's design for the Minimalistic Xbox Controller Stand, but I play with a Razer Wolverine Ultimate controller. I added a slot for the rear and bottom buttons. Works with some other XBOX controller with rear buttons as well.
keycap for mechanical keyboard
It's highly versatile; you can use it as wall décor, table décor for the kids' room , or anywhere else. Use it for anything your mind can imagine. Hope you enjoy Hey everyone, first of all, it would mean a lot to me if you could download…
Stand for Wolverine pro PS5 controller.
Razer Wolverine V2 stand Print on its side with supports enabled.
Inspired by the most recent Deadpool & Wolverine film, I present a fist that has the iconic wolverine claws coming out! Printed with no supports! 15-20% infill Can be printed with skin tone filament and metallic filament! Example shown…
Description: The death star as hovering model for your desk. Through magnets with repulsive polarity, the death star is hovering above the stand. The diameter of the Sphere is about 100m. Printing settings: Please note that the modell…
Supports required print in PETG or Pla
If you love Wolverine, the toughest and bravest mutant of Marvel, this planter is made for you! It is a succulent planter shaped like Wolverine's head, made in low poly style. The planter has a circular opening on the top, where you can…
Deadpool & Wolverine (Deadpool 3) Logo Just made this after trailer drooped.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Are you hyped for the movie ? ------------------------ For MMU/AMS or manual filament swap. ------------------------ Based on the poster: MMU: Manual:
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Wolverine Voodoo Doll. Colored 3mf included.
This a 3D printer design based on laser cutter design I made in 2016. This is a large design so I included a split version that you can glue together. Original description: "A claw design based on wolverine. I tried to make them as movie…
Design Concept This 3D model is a fusion of the iconic Wolverine character from Marvel with a skeletal theme, giving it an edgy, fantastical look. The design portrays Wolverine's fierce expression and iconic claws in rusty textures…