Schlüssel für Wassertank Revisionsöffnung Frankia
Schlüssel zum Öffnen der Revisionsöffnung am Frischwassertank im Camper Wohnmobil Wohnwagen
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
- Pobrania
- 117
- Polubienia
- 5
- Ocena
- 5
51 modeli
Schlüssel zum Öffnen der Revisionsöffnung am Frischwassertank im Camper Wohnmobil Wohnwagen
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Model Version: 1.7.0 The new version added: - The "Seven-Shifting Serpent" - The Witch's Vision (Nicole) Coming soon: - The second part of the Stellar Linchpin Quick Instructions: 2 pieces, 2 frame pieces and 2 connectors were used to…
Remix of ( https://www.printables.com/model/440401-under-desk-drawer-updated )
Hi Jason ( Great name by the way ; ) I do have a this helmet, but I'm not sure about the details as this was a bit rushed sorry, So many models and so little time. I'll come back time permitting and improve on it further where I can,…
This is a quick mask resembling the Sith mask we see in Episode 1 of Star Wars Visions. Any feedback please let me know.
Remix of the original cups by Ari with more subdivisions for shallow divider cups. Helpful for low-quantity or really small parts. I'll upload more subdivision variations as I need them
UPD 27.08.2024: Uploaded a version with a tighter fit. The original is now marked “Clearance”.
This is an easy to print box for storing small things in. There is a place for labels at the front.
Disclaimer: These and other models are available to all "my club" members starting at $5 per month, as well as for one-time purchase. Your support helps sustain the development efforts and the acquisition of modules. Thank you very much!…
Here's my version of the katana saber from the Star Wars visons episode "Lol and Ocho". I scaled it up 350 percent so that its around 11 inches. Be sure to post a make and check out my other models. Category: Props
Here's my version of TD-4 from Star Wars Visions Ep 8. I'd scale it around 300% for a size near what's shown in the show. There's two different head designs, one with the eye having layered disks to make painting the animated eye easy and…
TD-4 was a droid that was the constant companion of Lop on the planet Tao. The droid possessed a number of abilities and tools that included a recording functionality, capturing moments of Lop's life, from her time as an orphan through…
Bambu Lab Spoolholder Extension for AMS to use wide spools without removing the tube or cable of the AMS. Its compatible with the new spoolholder revision. Print instructions: 4 perimeters/walls 5 top/bottom layers 40% infil no supports…
Vierkant Schlüssel für Revionsklappen
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Shawn Gano's…
Genshin visions types for some uses
Storage trays for game counters. Designed to fit 2 side by side in a normal wargame box in the same space normally used for one commercially available counter tray (GMT, Aegis, etc.). Lid tucks in under the box when in use. Counters shown…
After watching visions i threw this together. Happy Printing. Category: 3D Printing
I cutted the Chin Part, made it easyer to print and put some Holes in it too
gridfinity divider bin 3x1x6U or 3x1x3U 6 divisions perfect for electronical component for exemple
Here's my version of the saber from the Star Wars visons episode "The Ninth Jedi". Be sure to post a make and check out my other models. If you like my work you can buy me a kofi, https://ko-fi.com/reprops Category: Props
i noticed i didnt print electro, since nobody was intrested at the time for that vision. fully made visions using the model--- from my instagram https://www.instagram.com/p/CVylafJDIF9/?igsh=MTFoYmNkZmhiZjRwcw==…
Simple with a twist… yep
Ideal for measuring board game-related things. If you want to multi-material print, you will need to set the materials manually in your before printing. Attached SCAD has colors set up in the script, so you might be able to automate it…
I placed every file in an Orca .3mf project and scaled them up 205% to max out a K2 plus. Set up and tested a thick wall vase mode profile for the K2 with a 0.8mm nozzle. Drew a foot with screw tabs and a zig zag slot, then added those to…
This is a replacement for early model Space Navigator knobs, as over time the rubberized grip starts to severely degrade, characterized by it falling apart and feeling sticky. There are a few revisions of the space mouse. To identify, pop…
Needed a stand for my Samsung television so the sound bar would fit under it and didn't want to follow the leg profile all the way. Therefore designed this general stand. There is a dovetail in the middle in case it's too large, just…
This is a 1x1x40 with 2 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…
Just wanted to have some division in the waste box so that I can separate the materials
This is a 1x1x40 with 4 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…
1. Introduction: After modifying the original design and creating V1, I discovered the base was bending and twisting in my vise when a blade was attached. Also, the pivot shaft was bending with a heavy blade attached. With these…
Compartment box with 11 divisions for regular size western blot nitrocellulose or PVDF membranes (8.3 cm x 13 cm) and compatible with 12 well SDS PAGE. This box was designed to facilitate incubation with different antibody samples against…
Print in PLA / PETG without supports. Make sure you paint the seem on the corner edge. My recommended setting: 0.2 mm layer height, 4-6 bottom solid layers, 2 perimeters
Only the Front left one from @Mongrel worked for me so I modified the others for newer revisions. My Elegoo CC is from November. If there is a way to see what revision my CC is feel free to tell me and I will post it.
Ich habe einen den Schlüssel von @Hobbydrucker gefunden, wollte jedoch einen längeren Griff. Ich habe die Datei daher quick and dirty in Bambustudio überarbeitet. Außerdem habe ich die AMS-Funktion genutzt um den Support vom Teil zu…
This is a remix from the original with no divisions on the inside. Also, this is bigger compared to others. Print Settings Printer Brand: QIDI Printer: I-Mates **Supports:** Yes Resolution: 0.2 **Infill:** 15 Filament: SunLu Silk PLA…
This model is a 3D printable representation of the mouse brain featuring surface grooves that delineate major cortical regions. It was generated using the Allen Institute's Mouse Common Coordinate Framework (CCF) atlas (see:…
This addon for the IKEA ORDNING Cutlery Stand is designed to help organize your silverware, There are two sections of different heights for smaller cutlery, like coffee spoons (see photo for reference), but please note the following:…
Welcome to Remotopia – The Perfect Home for Your Remotes! Tired of searching for your remote every time you want to relax? Remotopia is here to bring order to your entertainment setup! Designed and 3D-printed with precision using PLA…
We are pleased to release the 3D print data for the BlueSCSI V2 2023.10a Mounting Bracket . This is the stl file we created for a BlueSCSI official seller group about two years ago. This model was created by Kero's Mac Mods team, Kay Koba…
This adapter was made to use the original bellow on the DF83V Grinder in combination with the Slow Feeder 2.0 from Fused Visions. Even the Magnets and pins are aligned. If your Printer is like mine it could be that the holes are a bit to…
Center marker for multiple subdivisions. Center markers are ok if you only want the middle, but as soon as you need another uniform subdivision, things won’t work anymore. This is due to the cylinder-shaped guide, which induces errors…
FutureVisionStick , un bastón inteligente para personas no videntes buscando solucionar problemas comunes, con la finalidad de alertar a la persona que lo use y a su entorno sobre cualquier peligro. Incorporados paneles solares…
Only the Front left one from @Mongrel worked for me so I modified the others for newer revisions. My Elegoo CC is from November. If there is a way to see what revision my CC is feel free to tell me and I will post it.
This is a 1x1x40 with 4 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…
This is a 1x1x40 with 2 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…
Storage trays for game counters. Designed to fit 2 side by side in a normal wargame box in the same space normally used for one commercially available counter tray (GMT, Aegis, etc.). Lid tucks in under the box when in use. Counters shown…
Ideal for measuring board game-related things. If you want to multi-material print, you will need to set the materials manually in your before printing. Attached SCAD has colors set up in the script, so you might be able to automate it…