jeep suzuki vitara hubcap / wheel cover
copy of hubcap for suzuki vitara
- Pobrania
- 320
- Polubienia
- 21
- Ocena
- 0
35 modeli
copy of hubcap for suzuki vitara
This is a 3D model of a trash can made specifically for Suzuki Vitara 2015 onwards models. It perfectly fits into any of the two existing cupholders in the centre console. It has a hinge that connects with a piece of 1,75mm standard…
The plastic clips from my Suzuki Grand Vitara 2012 sun visor became brittle over time and started to crack so I designed this replacement to fit inside the metal wire as seen on the pictures. The model has a 2mm slot so you can easily…
Přihrádka do loketní opěrky. Suzuki Vitara. Varianta s přihrádkou na peníze i bez ní. Vzhledem k použití v autě tisknuto z ABS
The basic idea was to be able to make different lower parts for different car models and also the possibility to make different cup models. But so far I've only made and printed for my Suzuki Vitara :-) The lower part is hollow so you can…
Okay.. Don't print this with PLA.. :-) In your car the temperature will rise up to 60 degrees. I recommend ASA, it is still "easy" to print and it ist resistant to UV and high temperatures. At the end you just glue everything together.
Please don't use PLA - I recommend ASA for the hot temperatures in the car (summer). The top part that replaces the ring of your Vitara vent ring needs some support and is very delicate - be very careful when removing the support! If…
Dlžka tlače 31min, tlačené z petg 0,2. Rozobrať obmedzovač, vymeniť za zodraté stare plasty. Pohyb dverí je tuhší, predpokladám, že sa skôr vyderu, ako originaly.
This was modelled on the one that comes with the vehicle after mine cracked
The storage tray on the 2015 and later Suzuki Vitara models is pretty nice and roomy, but it lacks depth. As a result, I kept hitting my phone when the charging cable was plugged in. This model builds on the Storage tray from ciskje and…
Roof Closure Repairpart for an old Suzuki Vitara Cabrio Normal the red hooks break really easy and to find a new Replacementpart is really difficult i created repairparts Print with PETG or ASA 0,15 high min 4 Perimeter orientation like…
***Disclaimer: i made the part as close to the original as i could but i can't guarantee correct fitment, so results will vary. my friend's vitara had some of its flanges bent, and while it fitted fine, it fell off after a week and cant…
This is a replacement part for the plastic adapter mounted on the end of the diaphragm shaft that connects to the lever control arm for the throttle shaft for Suzuki Vitara XL-7 first generation. This replacement part goes on the end of…
This is replacement part for Suzuki Vitara Haslbeck Window exhibitor bar/Fensteraussteller Steg. The bar broke on a friends Suzuki and I hust made a replacment for it. Printed in PETG to have it more heat proof in the summer, with 0.2mm…
Can be used without a wrench Made to fit the awkward small space around the oil filter in the engine bay 65mm outer diameter Thread size 3/4" 16 UNF-2B I printed it on an MK3S+ w/ 0.6mm nozzle, 0.4mm layer height.
In need to replace the light cover / cap, one was missing, so i just replicate the one still remaining. I think it also works for other models of cars, so hopefully will be helpful for others. Printed with Prusa mini + Input shaper with…
A cover/case for the OEM 3-button key fob used for the 2007-2009 Suzuki SX4 (though some suggest up to 2013) and 2006-2012 Suzuki Grand Vitara. Printing Instructions No orientation is ideal, but printing either bottom up or face down with…
Frame replacing two caps
Leva apertura serratura portellone posteriore Suzuki Vitara anno 88-98
suzuki grand vitara II/2 statue
Suzuki Vitara / Sidekick Double Din 2Din side plates Not for a Double Din Radio, but for using TWO single Din 1Din units
I needed some kind of coin storage area in the car, so I made one from @gillis' original model based on his cupholder. It made for HUF (hungarian forints) but you could use it for many other coins as well. It has 2 holes for pens, or any…
This is a sun visor extender for Suzuki Vitara 2015 and onwards. Since the car has a wide center compartment in the middle of the roof, the OEM visor is too short and it rarely helps with the sun going directly into your eyes coming…
Suzuki grand vitara 1 switch in the driver's door
There's not much storage in-between the seats in a Suzuki Vitara. This gives you an extra box to use, and somewhere to hang a small rubbish bag. I've included a model showing all the bits together, but they all need to be printed…
A sleeve to extend the height of the pockets in the center console, to avoid taller things falling down. Best printed in TPU.
To maintain an entirely clear windshield while driving, I designed this custom clip-on phone mount as an alternative to unreliable suction cups or bulky dashboard holders. This specific solution is tailored for an older Suzuki Vitara and…
This is a dedicated variant of my Suzuki Vitara car clip, specifically tailored to fit the dimensions of the Xiaomi 17 Ultra. Designed to clip securely onto the dashboard air vent on the left side of the driver’s seat, it provides a…
Following up on my previous slide-in mounting solution for the Suzuki Vitara, I wanted to create an alternative for those who prefer a mechanical click-on mechanism. This variant offers a more tactile and secure locking feel while keeping…
This model is an adaptation of my Suzuki Vitara car vent mount, updated specifically to accommodate the Xiaomi 17 Ultra when enclosed in its SlimSkin cover. The design eliminates the annoyance of removing your phone case before driving.…
I needed some kind of coin storage area in the car, so I made one from @gillis' original model based on his cupholder. It made for HUF (hungarian forints) but you could use it for many other coins as well. It has 2 holes for pens, or any…