1611 modeli
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 7,94 €–9,70 € nettoWstępna wycena jednego wariantu
Handy holder for a portable radio. Suitable for older cars where you are not afraid to screw.
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spielzeug für die Kids
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Replacement belt clip for various 1980s Sony Walkman models WM-31 WM-32 WM-41 May fit others too. Modelled after pictures found in Internet. Fastening screw DIN 85 M4x10. Original Design by Sony corp. Japan. I deny commercial use of this…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Nice and detailed Wall Art model of the Nissan GT-R R35 Liberty Walk. Adjustable size. I accept new model suggestions.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
Replacement ground stake for an old sidewalk path light. Has cutouts for running wires.
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Old but good. Ministry of silly walks from Monty Pythons Flying Circus (1970). Thanks to https://www.printables.com/cs/model/238523-monty-python-ministry-of-silly-walks-silhouettes-f/files now as earrings. Stare ale dobre. Ministerstvo…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
VTX Bracket for FlyLens 85 with Walksnail Mini+Moonlight 4K Upgrade Kit
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Sony Sports Walkman : Cassette Player 2 hinges. 3 walkman parts !!! Will probably need to trim down edges of hinges on lid or back. Needed to do some offsets post production and forgot to recalibrate the hinges… bit of sanding should…
Wydruk około 12,93 €–15,80 € nettoWstępna wycena jednego wariantu
This is a solid platform for mounting your Walksnail Avatar with NANO camera kit to Sonicmodel AR wing 900. Fits perfectly nose for session camera, if you want completely get rid of nose view in camera, you have to slightly trim the epp.…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ENG: I designed a cordless phone holder (60x60mm) and a glass holder (80mm diameter) for a walker so that the hands are steady on the walker and free from objects. You need 4 cylindrical head socket screws (5x20mm) and 4 nuts for each…
Wydruk około 13,75 €–16,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Holder for nordic walking-sticks. Can be srewed to a wall.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Walker Bay dinghies are very popular and widely used around the world. I recently decided to outfit my Walker Bay 8 sailing dinghy with an electric trolling motor. I bought a half size 12V DC battery (Duracell SLADC12-35J) which is plenty…
Wydruk około 8,39 €–10,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description: This is a free 3D-printable holder specifically designed to fit the Motorola Talkabout T210 Rechargeable 2-Way Radio (Black with Red, 2-Pack) . The holder was modeled to securely hold your walkie-talkie in a convenient,…
Wydruk około 5,70 €–6,97 € nettoWstępna wycena jednego wariantu
Update: 08/09/2023 Updated some slots for better fit, hip-to-neck slot is arrowed for correct orientation, and improved surface icons for orientation of "skull" parts. Also added are not boring instructions, but an exploded view showing…
Edit 8/28/25: CHECK OUT THE NEW AND IMPROVED VERSION HERE! Edit 12/8: Added a “repaired” version of the leg armor, hopefully this fixes issues some have been having. I kept printing myself more and more armored legs to give them a bulkier…
Update October 22 2022 - Added a whole version of the grip for anyone who wanted it. Here is my Luke Skywalker lightsaber featuring a slide-open control box to reveal the internal circuitry as featured in a deleted scene from Return of…
Fun articulated toy - a moving chicken walking along a sloping walkway. It is a mechanical figure, no electronic device. The parts fit together tightly, no glue is necessary. You can use glue on the legs if you want. When assembling the…
A modern low-poly interpretation of a walking turtle, realized as a sculpture. Ideal as a decoration for the living room or garden. The model's standard dimensions are 200 mm x 120 mm x 103 mm (freely scalable). Printed with the following…
Here is a fun but larger project to build an opening lightsaber. Most of the many parts I used to make this version were modified from other designers, mostly CaseStudyno8 . Also from Dogbert's emitter remix and timmy_d3's remix . It has…
Meet Boo and Boozer, the cutest ghost duo around! Boo loves taking his ghost dog, Boozer, for spooky strolls under the moonlight. Together, they bring a dash of spooky fun to your collection! Join our Patreon to get a Commercial License…
Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Patreon This model needs supports to the chin. Luke Skywalker, a Force-sensitive human male,…
„He who fights with monsters should be carefull lest he therby become a monster. And if thou gaze long into an abyss, the abyss will also gaze into thee…“ Update 15.03.2026 The chainmail for the tassets have been redesigned and no longer…
Bring the menacing power of the Empire to your desk with this incredible AT-ST Walker 3D print model that captures every mechanical detail of this iconic Star Wars vehicle. This meticulously designed STL file showcases the chicken…
My daughter requested a ghost cat be added to the infamous TJMaxx ghost walking dog, and here we are.
Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. A few of the parts, are sadly missing. If anyone…
This is my fourth iteration of the fiendishly clever walking toy invented by my friend John Jameson back in 1981. It mechanically gears a spinning gyroscope (made of 104 pennies!) to a cam which pushes a pair of feet up and down. When one…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Does your cat look bored outside a window? Doesn't your old cat jump to her favorite spot anymore? Is your cat in need for a new exciting toy? Do you want to print something cool looking and useful for your cat? Then you will need this…
This is a model based on a real life Bandi Skull-1 Toy. I took mine apart, measured each piece and recreated it (for the most part) in Fusion360. My version isn't as complete as the original so each mode has to be printed separately. So…
Had a chance to make some tweaks and gave him a base. Not perfect, but should be more accurate than the previous one. Faces are tricky to get right, but it's a lot of fun to try. Best printed upright with supports under nose/chin/back.…
asssy original Colt_Walker_Revolver
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…
3d puzzle of this cute cat walking. simple to assemble. Very fun with this, nice for decoration. My cat love this! steps to assembly: 1: 2:
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…
Bring the Empire's most feared ground assault vehicle to your desk with this incredibly detailed AT-AT Walker 3D print STL file! This imposing four-legged Imperial walker figurine captures every mechanical detail from the iconic armored…
Introducing the Shellwalker from Horizon Zero Dawn, now with removeable components! This machine is to scale with the official board game and stands on a 60mm base. It is intended for all pieces to be printed separately and connected…
Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…
If you like what I do, you can support me and get access to extra content by becoming a patron! https://www.patreon.com/printedencounter
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Hi everyone, I designed a simple walkie-talkie which can be resizable and support-free . You can see that the model in the cover photo is smaller than the original size. I printed it by adjusting the size scale by 60%. Have fun!
Everyone's favorite leaf bug! (As seen in Bluey Season 1 Episode 6, and Season 3 Episode 46) THIS IS A DIGITAL MODEL Not a physical object. Bug is scaled to approximately 1.5" long. Scale to whatever size you'd like. Perfect for 3D…
I've printed this a few times, always using a brim to help with bed adhesion. This will definitely need supports under the dog's chin, but the rest may be printable without. The supports from within the model are a little bit of a pain to…
Thanks to DrMckay for the incredibly detailed model from Battlefront 2. I look forward to stripping it down into parts and printing it where time permits, Cheers Jace
The second lightsaber wielded Jedi Knight Anakin Skywalker during the time of The Clone Wars when he fell to the dark side. This is Anakin's lightsaber as it is seen in Episode III: Revenge of the Sith. The parts in the folders are parts…
🌅🌅 May the 4th be with you! At MiniWorld3D we celebrate Star Wars Day of May 4th with a model inspired by Luke's iconic home at the Lars moisture farm in Tatooine. To be hidden from the Emperor and Darth Vader, Obi-Wan Kenobi took baby…
Based on the drawing https://www.deviantart.com/bugplayer/art/Fluttery-Walk-610501022 Print instructions The wings are separate pieces and have to be glued on. The tolerance for the interfaces is 0.15 mm. There is also a separate version…
Pretty simple to print. 0.2mm layer height and I do three walls. You can mount it to the camera with screws (if you have some small enough) or glue. I prefer using glue and I haven't had any issues with it yet. I've printed it in TPU,…
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…
Fan of the Star Wars' movies, I'm still continuing my “Star Wars' keychains collection” with this Imperial AT AT keychain . It's 5mm height and 45 mm lenght. You will need support because of the foreground legs printed in PLA, nozzle…
This is a cup holder for a collapsible/foldable walker. It is designed to fit various insulated tumblers as shown. The holder can be 3D printed in a variety of materials such as PETG or PLA. The holder is designed for a walker with 29 mm…
Reuploaded from BigMrTong from Thinaverse, i Did not make this model, please read below for their description and support their patreon. A late night kitbash for fun. 80% of parts are just remixes, I have linked all these on the Remix…
This is a remix of UnimatrixRed's Lightsaber model, wherein I've added some basic LED lighting to the crystals. I've also revised the clamp lever model to make it easier to print, and have altered the nameplate on the display base to be…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
Walk & Roll (also known as “Ninja Otto” ) is the upgraded, modular walking version of Otto—now redesigned for the HP Robots Starter Kit + Invent expansion . Instead of wheels, this version gives Otto articulated legs that let it walk,…
A miniature "sandwich-board" or "A-frame" style sidewalk sign that reads "Disney ZONE". Print-in-place, hinged at the top and support arm in the middle. Easy print, should work decently on just about any well tuned FDM printer. Print…
Walking Cat, Hexa Sculpture
Fun and easy to assemble. Comes with a Quick guide for assembly.
This is a straight sidewalk and corners of 15, 30, 45, 60, 75 and 90 degrees intended for a model train scene. The model is best printed with a 0.25mm nozzle. Happy printing.
This mount is suitable for 19mm cameras with two screws on one side. I created it especially for walksnail cameras that you want to mount on Geprc mark4 I used Prusament red PLA, but you can use some flexible material instead ;) I also…
I made this walkway for a piece of table top terrain I build. It is scaled for 32mm games like Warhammer, Kill Team, Necromunda ect. but will be usable for Star Wars Legions as well. Size assempled: Length: 100 mm Width: 54 mm Height: 28…
DISCLAIMER: This lightsaber was modeled based on photos with no scale, so all measurements were guesses. Actual size may differ from props used in films. This is a simplistic lightsaber model based on photos of props used by Mark Hamill…
25.5х25.5 Canopy Walksnail 1S lite kit camera (mobula, meteor etc) Weight = 1.7g Angle = 30
I have been helping my mother after she had a knee replacement surgery. She is using a walker to get around for the time being, so I made these walker clips and attachments to help her. She definitely feels more independent being able to…
Just in time for Star Wars Day! Anakin Skywalker's Lightsaber, as wielded by Luke, Finn and Rey as well. This prop changes from movie to movie, so I've meshed together my favorite parts, mostly from Episodes 3,5 and 7, for this model. Be…
Hi! This a Remix of some parts used in my previous design Tow Walker . UPDATE 30/6/2018:: added 'long-bin.stl' . a 25mms taller bin suitable for tools or other stuff :D Useful as a penholder, desktop bin, planter or if you can print at a…
Spoolwalker A totally unnecesary badass spool holder / toolbox. I love robots. Having a robot as a toolbox, spoolholder or storage is always cool. NO SUPPORTS REQUIRED!!! Designed with tolerances between 0.2 and 0.3 mms. Models are ready…
A faithful recreation of the cute player characters from Big Walk. Broken down into individual color pieces so no multi-material capabilities are required. The character stands at 10cm tall at 100% scale. **This is a work in progress. I…
Walksnail VTX 1s Lite camera mounts adapters Notes Caddx should provide this mount in the product package :-( ... extra mount holes for canopy to choose from (and the center one as well) compatible to 14x14mm and 19x19mm camera mounts…
Quick release (keyed-slot) analog module bay for Walksnail Goggles X and DJI V2. Have a look at the awesome original model first. This remix replaces the main body and the “B” mount adapter plate that gets screwed to the back of the main…
It is a scaled and modified version of the original but with a solid back. It comes with two feet for putting it on display
This another version of the Monty Python's Ministry of Silly Walks wall clock. Based on the stencil prepared by Jan Flaška , modified substantially. This clock has been designed to fit the TFA 60.3525.01 (radio controlled) and TFA…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Required for assembly: 5 mm steel balls, you can also use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 4 mm eyes Super…
Miniature businessman for your diorama, architectural miniature or as a figurine. Man | Businessman | Architectural figurines | People | Person The businessman is suitable for 3D models of city or architectural diorama. Printable for the…
This is a free low-poly model of Wraith from Apex Legends! Shop full quality 3D prints at https://www.etsy.com/shop/LootDrop3D?ref=simple-shop-header-name&listing_id=892108206
Just a basic cover to protect the lenses and infrared sensor. Print in TPU with 10-20% infill.
This is a set of pieces that can be used to recreate a Luke Skywalker figure at 500% scale. This figure was released in 2016 and was included in 8 sets between 2016 - 2022. All of the stl files needed to create this have been included in…
New version doesn't require added supports (Though a perimeter can help) The first three images show the new version, the rest of the images are for the old version
For those seeking to make a more accurate Graflex saber replica: I re-designed the clamp section and adjusted the lengths of the top and bottom to be more faithful to how an authentic Graflex flash tube disassembles. Now when the saber is…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I modeled three different walkways in two different styles using CadQuery. suitable for miniature wargaming. --- For more details, videos, printing tips, and part specs go here: https://miniforall.com/walkways.html This is an open source…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Walking Dead Silhouette Art Very easy to print, no supports needed, the back slots into place securely. Print more than one back so that you can change the mood by changing the background. @3DPrintBunny
This rollator was created for a daycare project. Based on the original rollator file, I designed and printed a new, printable version. The wheels can be turned. I printed the left side frame and the right side frame in ABS. The small…
you will find a instruction as pdf by "other files"
buymeacoffee.com/dgfpv this is the version 2 of my walksnail vtx protection mount. i have changed the overall design, added 0.4mm walls to make them slightly stiffer, also added 20x20 mounting holes for the walksnail vtx v2
Description Everyone knows Luke's lightsaber from Return of the Jedi. Disney sells them (I have one). But for those with a keen eye for details will know that the lightsaber Luke uses in most of ROTJ does not match what we get in the…
This charming figurine captures the iconic Highland cow with its long flowing hair, small horns, and sweet expression. With fine detailing in the fur and a sturdy build, this piece makes a delightful decorative figure or collector’s item.…
I measured and scaled up the lego Radio 10x. You might need to adjust the size of the size of the plugs as needed.
Here's Luke Skywalker's lightsaber from Return of the Jedi! Be sure to print two of the triangular indicator pieces, those are very small prints, I would suggest printing them at the same time as some of the larger pieces to let them cool…
A modern MP3 player in a vintage package I started this model to solve a very real and common problem in all of our lives: there aren't any functioning Walkmans on Printables. Hence a modernised take on the calssic music players of the…
3MF is painted for my Prusa XL. STL also supplied. (copied) Meet Boo and Boozer, the cutest ghost duo around! Boo loves taking his ghost dog, Boozer, for spooky strolls under the moonlight. Together, they bring a dash of spooky fun to…
Tested on a few different models of Walkman. Print flat side down. V2: added a chamfer
CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…
