Liczymy pasujące modele…
Overview File this under the "yet another" category, but yes, I wanted to model one too. I have a bunch of media and dongles and wanted a nice rectangular "plot" to arrange them on. Though this isn't a remix, this was definitely inspired…
It doesn’t print fast. It uses too much filament. It takes up a lot of space. It does a barely passable job holding pens. But it’s swirly and you love it, don’t you? Yeah… I know what you like. Go ahead, I know you’re gonna print it.…
Made this for reasons unknown. Print instructions The gcode is variable layer height for best result.
I've re-made the original model, with a few minor improvements, such as thicker walls, a cut out for the antenna and mounting struts. Thanks to Illya for the original starting point! Warning: Please print a test model and check your…
Overview I found that picture on internet and I had to bring it to the world of 3d printing. I don't know who is original author of this picture but it is great. Check this model on youtube…
This is technically a remix of the gorgeous Mini Son of Whyachi by Pinfari13. I used their model as a guide for the correct scale/sizing of the main body. I have included the Fusion 360 file so you can edit it all you want. I have also…
I picked up a used portable AC unit that had almost none of the original duct work. Rather than spend $80 on replacements, I reverse engineered the piece I had and designed these elbows to fit my application. Printed out of PETG at 100%…
At 100% resolution (Layer height 0.2) the color changes are: Layer 0: Red Layer 8: White Layer 16:Black
Description Simple pedal enclosure designed to fit an AB or AB-Y switching circuit. Designed to fit two LEDs to indicate which input/output is being used. The circuit itself is passive. I recommend the use of the circuits at General…
Joker 2D wall sculpture. Credits to Vince Low for the drawing. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,1mm Infill: 100% Filament: Fil-a-Gehr PLA Transparent Green Notes: Print with the finest nozzle you have…
BUY THE OTHER COMPONENTS/COMPRA LOS DEMÁS COMPONENTES: RGB ed strip/tira de leds RGB: https://amzn.to/2yGKkJv LED RGB controller: https://goo.gl/YE9jVb Power adapter/Adaptador de corriente 12V: https://amzn.to/2Acn1Jn LED 4 pin male…
A miniature stool you might see in a beginner wood-shop course as reference material, or a support-less overhang test. Supports: depends on how big a workout your giving your printer Infill: 10% recommended Rafts: Not needed
Description and goals This is a slim case for the WHY2025 electronic event badge, that sits on the back exposing most of the sides, including the spacer, that then gets part of the overall look, especially if printed in a contrast color…
Nothing special. Print it, Paint it, Hang it :-) ps: the tape you normally don't see, only if you go close. And for sure there are better ways to fix it ;-)
Print as oriented, no supports needed as long as you have sufficient cooling. Brim recommended.
Funny Sign - "Why is everyone so against sugar? ..." , multi colour print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here -…
Overview Minor remix of @EricCarlisle_1293126's USB Holder. I removed 8 of the SD holder slots (because I don't have that many adapters, and honestly, if I did, I could toss some of them) and I made them into a little cubby to hold the…
A Dark Knight Joker coaster design… for all Batman fans! Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Elegoo Red Commercial Rights If you wish to have commercial use rights, you can Buy Me a…
I lost 2 of the hose connectors to my Whynter ARC-14s, and I checked everywhere online for one with no luck, so I modeled this off of the ones I still have. It is a 1 to 1 recreation (aside from the curve, which I couldn't figure out the…
A fridge magnet or plaque with an amusing text which says "I'M NOT ARGUING I'M JUST EXPLAINING WHY I'M RIGHT" I've included the colour change .bgcode made with PrusaSlicer
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
This fun 3D model shows the famous joke, “Why is six afraid of seven? Because seven ate nine!” The numbers are designed with faces that show their feelings. Six looks scared, with wide eyes and an open mouth, while seven looks sneaky and…
Funny Sign - Why is there so much MONTH left at the end of the MONEY, multi colour print, printed in ZIRO PLA Glitter Diamond Purple and Sunlu Matte white PLA. Complete with recesses for 10mm x 1mm magnets to make the sign easily…
A holder for the Why Evo remote that can be attached to the sun visor in Peugeot cars. Print with a heat resistant material (I used PETG).
This model merges the front panel and the spacer for the WHY2025 badge, shaving off some space so that the keyboard is more exposed and easier to use. The fact that it's one piece also helps with rigidity. The sunken screw holes ensure…
Congratulations for finding the most unnecessary over complicated over engineered 8mm pet bottle cutter ever (probably). It might not help you cut pet bottles better or faster than other pet bottle cutters, it might even not work properly…
So why is this supposed to be a tool? You can't do anything with it or can you? You can. Imagine this: A: “Have you repaired the lawn mower?” B: “No, I haven't got around to it.” A: “You haven't got a round TUIT you say?” B: “Yeah.” A:…
This is a work in progress, designed for the WHY2025 badge from published design files - nothing was test fit because I have no badge in my hand yet. First multicolor print of sorts, I'm looking into having the colors in separate STL…
Introducing a 3D sculpture of Elinor, the main character of the beloved cartoon show 'Elinor Wonders Why.' I had the idea to sculpt this after seeing a Facebook post on a 3D printing group, where the parent of an autistic child was…
Engineer - I'm not arguing I'm just explaining why I'm right
Background and development: My wife is a teacher, she works at a special educations school, teaching children with a lot of special educational needs, mostly combined with a low IQ. She frequently adapts materials and resources that are…
Printed it at 100 percent infill with PLA plastic. Shoot this model up into the air (Will not work in wind) and let it spin like a maple leaf. HAVE FUN!!
A Dark Knight Joker coaster design… for all Batman fans! Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Elegoo Red Commercial Rights If you wish to have commercial use rights, you can Buy Me a…
Update 10MAR24 - added a top and bottom where the 6 is the pass thru number. I had the intention of constructing a box, and while searching for ideas, I came across a game. However, I was dissatisfied with the fact that the lid and the…
Why not? Remixed from https://www.thingiverse.com/thing:4912324 for multicolour prints. Colour changes @0.2 layer height: White 0.8mm - change to Red at the start of 5th layer; Red 1.2mm - change to Black at the start of 7th layer; I…
this is a sign that says “I'm not arguing just proving why I'm right”
Bring the Christmas Spirit to your web meetings! No glue required! Click connectors fit all the parts together. Under 10 g of Filament per Model Halo/Heiligenschein: Put the three parts together and clip the assembly to your headset. If…
WHY ARE YOU CRYING? SIGN Category: Signs & Logos
A simple tiara compatible with the WHY2025.org look and feel! Show how WHYminded you are. Printed in PLA, then it works and is reasonable comfortable. Font is BEON (https://github.com/noirblancrouge/Beon)
WHY ARE YOU CRYING? SIGN Category: Signs & Logos
Why always me - rules of the game: GOAL: The first person to get rid of all their chopsticks wins. The last person left has lost. So you can choose whether you want to play a winner or a loser. PLAYERS: Two to six. The game sticks are…
A Dark Knight Joker coaster design… for all Batman fans! Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Elegoo Red Commercial Rights If you wish to have commercial use rights, you can Buy Me a…
Official badge spacer modified with quite a bit more space for the LoRa antenna connector. As a tip you don't probably need to print this, you can just heat up the joints then press the included spacer on it and hope for this. Released…
This model is actually very simple if you know how to design. Hopefully whoever prints this will enjoy it because I am so serious.
Carl the Robot is mainly an exercise in modeling stuff in 123D. I have not made a model with this many parts before, and he was designed on the fly, pretty much. In the form presented here, Carl stands about 8" tall. It is meant to be…
Woofster’s dictionary power dog tag for the Super Why fans out there. Printed with layer changes for color changes. I printed Red-White-Red to give it a book effect. A small wire looped through the attachment point made it so I could…
A simple sign that I designed in Tinkercad.
This is my first version of my Whyman model. I'm hoping to later update this to make it more dimensionally accurate and add a spot for an Arduino so that I hook it up to ChatGPT to make it speak. For the glass part you have to use a 16oz…
Until now i have believed that the most toxic part about UV-resin printing was the resin, but i was wrong! It is Chitubox (resin is still pretty nasty so wear your PPE). You might think that I'm salty about something, and that's correct,…
What is it? The 5 Whys, a problem-solving iterative technique used to determine the root cause of a problem by repeatedly asking “Why?” five times. The fifth ‘Why?’ will reveal the root cause of the problem. Sakichi Toyoda, the founder of…
A sign I designed in Tinkercad.
The popular cat ears of https://c3cat.de/ remixed for WHY2025. Font: BEON.
This is my version of the Why Always Me (Warum immer ich) dice game. Most versions of this game have either 6 holes or 12 holes, but not both. My version can be played with only a few people (6 holes) or a lot of people (12 holes). The…
“Hey dad, I want a cannon so I can shoot bad dreams away”. “That's a great idea!" --Three hours later-- "Here, son, look at this amazing cannon that i found and printed!” “Great! I want seven of them! - but small enough so i can put them…
The goal of this design is to protect the suspension linkage bearings from mud, grit, water etc. which reduces their life and keep the bike a little cleaner. The guards are printed in PETG, and held on with cable ties, I prepared for 6…
The badge case by @dynom took 3hr to print on my Prusa MK4, so I designed a flatter one that I can print quicker to get more cases to more people. Built for speed not for comfort. You may be interested in my protected 18500 battery adapters
It is past 5 hours from the release of the video, I saw it hours past the release… I find it funny how fast we can recreate physical things just from one image in mere hours. I also wanted to know if printing would be faster, but on…
Version 5B - Original listing that uses layers for color changes. Used to print without a AMS or MMU. Version 5E - made it to accommodate the BAMBU AMS for the different colors instead of using layers for the colors. This uses a plethora…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. DC - The Joker - Why So Serious Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size You may…
Nuka Cola shaped pill tube. because I can. How I Designed This learning process originally mixed as a 10mm tube to transport a stash of pills. it evolved into creation of custom threads, then sticking with a theme of putting fins and…
Complete details on this thing Let me start by saying, I can't really recommend anyone undertake building one of this :) Not that it's that difficult...but why? But that aside, this is a magnetically coupled, fluid-damped paper towel…
Simple 39*39*3 Poker Chip with my logo. Ideal model for colour changes after the 1st and 2nd mm. Unfortunately, they are quite light compared to a normal poker chip but at least they look nice.
Turning the badge on and off is a pain in the butt without some tool, so this 2min print makes your life easier.
It won’t cook breakfast. It won’t hatch into a chicken. But it will make your keys look delicious. Stick it on your backpack, keys, pet goose, or spaceship (we don't judge). Printed with love, served with a side of nonsense. 🍳 Warning:…
This case is a Work in Progress, The lid needs redesigning for final fit to prevent, too much rattle currently a sock or foam piece will fit in nicely. I request that if you are making a remix please also upload the F3D source files so…
Why do we fall? I really love this quote (and its answer) that appears in the Christofer Nolan Trilogy of Batman. So I decided to print it and put it on the top of my room door. Just a daily advice for falling every day without regret it.…
A 3D printable version of white canary's logo The pegs are simply for indexing and do not provide any clamping force, you will need to glue it The pictures were taken of a 150% scale print Both printed in PLA, in the fine setting as it is…
to be modified at will - inspired by https://wiki.why2025.org/Welcome and the .STL found there
A funny sign for ideas/models that just need a why.
This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . As a small object, this model is full-scale with no premium alternative. However, to explore full-scale deluxe editions or alternative…
Because of reasons (see why18650.org ) I use my badge without 18650 cells. Yet I use this case. I found out that it's easily modified to make it smaller and flatter so I decided to do just that and share it. It still fits 10mm pouch…
FUNNYYYYYYYYYYYYYYYYY!!!!!!!!!!!!!!!
Why Do Developers Prefer Dark Mode It Attracts Less Bugs
This is a completely different enclosure design for the awesome #why2025 event badge by https://badge.team It was inspired by this case design by @dynom and the fire hazard discussion . In stead of 3D-printing the full enclosure, you'll…
I was not very happy with the wheel speed sensor cable management on my Whyte E160 so I made this small guide to ensure a stick or other cannot push the cable into the back wheel tire which would ruin a day of riding. I think it will suit…
This is my take on creating funny Crash Derby Car. Can be printed without any supports. This is small model so i would recommend printing it in >0.2 mm layer line. Probably can be scaled up to be funny desktop miniature.
🕵♀ Female Detective Tokens – Expansion for Alfred Hitchcock Presents: WhY? Add style, wit, and classic sleuthing flair to your mystery nights with this printable set for Alfred Hitchcock Presents: WhY? This set includes four outlined STL…
Every Day Is a New Opportunity To wonder why you came in.
With this holder your can attach a Waveshare e-ink (e-paper) display to your shoe because why not?(*) Attach the display to your kid's shoe (or your own) and immediately upload an image! The display is an e-paper (e-ink) which is well…
Multiboard holder for the badge from the WHY2025 hacker camp
I have made the “But why?” Penguin, its a simple and small print, to print for display.
Weird funny Elvis statue (from tinkercad)
The goal of this design is to protect the suspension linkage bearings from mud, grit, water etc. which reduces their life and keep the bike a little cleaner. The guards are printed in PETG, and held on with cable ties, I prepared for 6…
This model is one of the collection Prêt à Faire: Printable Readymade Models 1 | Concept & Provenance Why Not Sneeze, Rose Sélavy? is a Readymade sculpture by Marcel Duchamp created in 1921. It is among the most elaborate of the…
![[WORK IN PROGRESS] WHY2025 Badge](https://media.printables.com/media/prints/13a2a17b-fd6f-4ebc-a12e-7452f92ccd15/images/10374457_719eb7c2-5c7b-4579-96ad-346f397cf016_a8821565-9f00-4700-96c9-0b4aae23639c/img_20250803_205230.jpg)
