1833 modeli
Stand for your Xbox controllers. Available with and without the Xbox logo. MMU2S version has the logo embedded in the STL. Use the split to parts button in PrusaSlicer to separate or load the 3MF file. Can be printed in the orientation…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
This model is inspired by this simple holder: https://www.thingiverse.com/thing:716092 But because most of Xbox players have at least two controllers at home, the original model has been modified to a double holder for two controllers.…
Wydruk około 4,98 €–6,08 € nettoWstępna wycena jednego wariantu
This is Xbox controller stand made from PLA. NO SUPPORTS ARE NEEDED!!!
Wydruk około 24,00 €–29,33 € nettoWstępna wycena jednego wariantu
Use to mount your XBOX X/S controller to your wall or your race rig. Holes are sized for two M8 bolts or just use zip ties.
Wydruk około 4,44 €–5,43 € nettoWstępna wycena jednego wariantu
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
A Holder for the Xbox Controller for the Skadis pegboard. The 2 Hooks slot into to 2 parallel holes on the Ikea Skadis and hold the controller securely.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Thumbstick replacement Probably will work with other XBOX pads too I recommend to: use 0.25mm nozzle (to better reproduce the texture) or print with resin Update: additional champfered version requested by @ntnt
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
A charging stand for the Xbox Elite V2 controller. Accommodates the included charging stand. Uses minimal material due to the cutouts. Doesn't need to be printed with supports, but it might make certain areas more stable if you do. Any…
Wydruk około 2,49 €–3,05 € nettoWstępna wycena jednego wariantu
I like my controller to be stored out of sight, but still reachable from my chair. I recently discovered a model that would hang the controller by the joysticks. However, there is speculation that this will induce drift into the sticks…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a stand for my Xbox Ally X for when it's not in a case (or in my hands), but the cardboard one that ASUS includes in the box isn't going to stand the test of time. The stand holds the console steady without the risk of tipping…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
High accuracy thumb sticks improve game performance by 10% when playing various games
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
This is a remix of the mount done by MarMed but I made a honey comb/hex mesh pattern in TinkerCad that I have added to the top mount in order to minimize vent blockage. The top mount is basically just keeping the Xbox from tipping and not…
Wydruk około 5,67 €–6,92 € nettoWstępna wycena jednego wariantu
Introducing the Wire Lock Block for Xbox One S controllers. A simple 3D printed battery pack and cover that prevents the USB cable from being accidentally disconnected mid-game. Optionally the battery pack has a screw hole so that it can…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
I modified the wheel for the Xbox controller that the cable fits in. That's good for PC-Players without a dongle, like me, or everybody who wants to charge the controller while racing. I reduced the speed and heat to prevent stringing,…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Makes it so your controller can accept 18500's (like the 18650 but shorter) so it will fit into an Xbox One controller. Use a little bit of aluminum foil to bridge between the spot where the other battery is supposed to be.
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
This simply holds your controller and takes up very little space. It is very different from most stands. It will hold your controller via the type c connector. I have made a stronger version which I strongly recommend you use. I haven't…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
Xbox Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
The Deep Calls... 🐙 A tentacle rises from the depths to safeguard your Playstation 5 controller. Functional, eerie, and impossible to ignore. Tentacles not your thing? How bout dem bones
*The file was exported in inches. If it shows up tiny in your slicer, scale it up 25.4x I bought two used xbox controllers that didn't have the battery covers on them, and none of the designs I found online fit very well, so I went ahead…
Designed for Xbox Series X and S Controllers. I think it's compatible other Xbox controllers except those that use a battery pack. Note: The Xbox logo may require sanding to get it in place. Or you can paint the logo hole.
Stable stand for Microsoft Xbox One/Series controller.
Rack and pinion steering for your xbox controller. 100 degrees of rotation. Enjoy finer control in racing games. Get the remastered version: https://www.printables.com/model/271330-xbox-one-mini-wheel-evolution What you need: 608 bearing,…
Simple, easy and quick to print (around a hour) mount. Not a perfect design, might revisit later but works fine. Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Resolution: 0.2…
Rack and pinion steering for your xbox series X [S] controller. 100 degrees of rotation. Enjoy finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Remix of my Xbox One controller holder for use with IKEA Skadis pegboard with an…
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
Thing files for Browns PlayStation Xbox Switch Controller Stand by brown1985 - Thingiverse
TEST FIT TEST FIT TEST FIT Head here for the full Xbox design PS4 Version Available Here PS5 Version Available Here Switch Version Available Here Print and test controller clips to make sure they fit. 4 files provided here: 1: STEP file…
scanned the xbox one controller using my Mole Scanner from 3DMakerPro
Battery Cover for Xbox Series S/X Controllers clicks in firmly printed in PLA i think this is the first "free" model of a normal battery cover for the xbox series controllers
It works like this: Two different versions are included. One for left-handed and one for right-handed gamers. Print the parts in PLA with regular 0.2 mm layer height settings. All parts can be printed without supports. (the A button has a…
Replacement battery cover for Xbox Series X/S controllers. I printed using PLA on the Prusa i3 MK3 and couldn't be happier with the results! After testing the first version, which is as close to an exact replica to the original part as…
A small modification of the bearing-less mini wheel by mrplasma ( https://www.thingiverse.com/thing:4498704 ) which is based on the pixel2 design ( https://www.thingiverse.com/thing:3049220 ). Details I noticed that in the original design…
I needed a solution to mount an Xbox on a wall. Something that would be secure, allow good airflow, and look good too. It's a tight fit and the power cord locks the xbox in place. All ports and buttons are accessible. The bottom has holes…
This is a no support print, there are custom supports included in the model. If the model doesn't fit on your controller than you should try printing at 105%. They will need a little bit of force to get on but for the most part work great.
Xbox Controller - 3D Scan Use to Create your own custom Controller Stand
Xbox controller stand with cutouts for the paddles on the back. Best fits the elite series 2, but because of the slightly different shape from the series controller originally used by the OP, it's not a perfect fit. Original elite…
****** Make sure to check out the entire clamp and rail system lineup!!****** https://www.thingiverse.com/hardline23/collections/clamp-on-rail-system Welcome to my SECOND released project for Thingiverse! I normally do more industrial…
Desk space is premium real estate. Hang it instead !!! I did not need support but your mileage may vary. Uses the T-Clip system. The default one might not fit all Skadis board, but the Fusion 360 file is available here:…
I followed the instructions that npiegdon laid out for his excellent Nintendo Switch Pro Controller Stand to make something similar for Xbox 360 Controllers.
Someone requested an xbox controller version of a phone mount I made for the Stadia controller (thing:4008153) so here it is. Confirmed that it does work with an elite series 1 and series 2 controller with paddles (special thanks to…
einen hier gefundenen Xbox Controller halter nach konstruiert und diesen für Zwei Controller gefertigt
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
There weren't many controller stands I liked here on Thingiverse. The ones I found were simply a U shaped stand that just held the controller. This stand was custom made and fitted to an Xbox One controller, so the stand essentially wraps…
For Xbox 360 Slim and Xbox 360 E. -all screw holes had 1 centimeter diameter counterbore, should support most generic PC HDD screws -holes for a pull tab, use scotch tape. -thick pry hole for when the pull tab was unusable/broken, use a…
An Xbox One controller holder for IKEA's SKADIS pegboard. Print on it's side with supports enabled. Step file included if you would like to modify it.
Beautiful display piece that acts as a stand for Xbox Series Controllers. Printed with organic supports and 8% infill. The upper teeth are very fragile, I broke one off while removing the supports. Adds character though ;). Printed with…
Adapter that will let you use a standard (~100mm x 70mm x 7mm) 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug.…
Xbox controller stand for Xbox Series X.
Looking to upgrade the storage in your OG Xbox to a SSD or other 2.5 inch drive and want to securely hold it in place? Look no further than this 2.5 inch to 3.5 inch adapter that was custom designed specifically for the original Xbox.…
Xbox One game case holder that fits 12 game cases.
Please note! Xbox one and series controllers use slightly different battery covers Please make sure to choose the right one! Using the wrong one can end up with the tabs breaking in your controller (which shouldn't be dangerous but will…
THX @qgepbiz for the original, which inspired me for this remix Minimalistic Xbox Controller Stand von agepbiz | Kostenloses STL-Modell herunterladen | Printables.com Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip…
Hi everyone! I have designed some mounts for the Xbox One, Nintendo Switch (Pro controller), and Playstation 4 controllers. These can attach to the wall via command strips or screws, it's up to you. I uploaded a model for the Xbox One /…
This remix just adds a logo to the front of the stand. Probably going to need to scale down the logo to fit. Resizing the logo down to 95% in the slicer gave me the best fit in the holes, but I did need to glue them in.
Simple and clean looking Xbox Controller Stand. Fits 8x3mm anti slip rubber pads (optional) Printsett 0,1-0,2mm layer height
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Xbox One controller holder for use with IKEA Skadis pegboard now updated to have…
I was lucky enough to get an xbox Series X at launch but like most TV stands mine has shelves that don’t accommodate the console standing in its natural position. I didn’t want to sit it on the floor hoovering up dust, so designed and 3D…
Video Game Stands (PS1,PS2,PS3,PS4,PS5,PSP,XBC,XBO) by nibor_repmek - Thingiverse
I've designed a minimalistic Xbox Controller Stand for the IKEA SKÅDIS pegboard Subscribe or follow me on: Instagram: https://www.instagram.com/agepbiz/ YouTube: https://www.youtube.com/user/agepbiz Twitter: https://twitter.com/agepbiz
Keyhole and flat back versions available, as well as with and without logo. For best strength and quality, print sideways. Elite Series 2 (Coming soon, premium) Dualshock PS4 Dualsense PS5
I'm fine with the shorter paddles, but always accidentally knock the long ones. I wanted something to use them to capture video, so made these stubby back paddles for infrequent use. Should work with the Series 1 or 2. Print Settings…
I designed this GPU fan adapter plate for the original XBox to allow you to use a 40mm fan instead of the loud and proprietary original fan. This will only work on the 1.0 version of the original XBox. If your XBox is a later model and…
Additional paddles for the standard Xbox One controller. They transfer the bumpers (RB/LB) to the bottom of the controller and enable you to use the middle fingers for quick and easy action. They also enable you to reach the opposite…
Tired of the plain look of the XBox Series S? Try this case, the Voronoi pattern gives it an organic look and it's bound to catch the eye. It wraps perfectly around the top fan cutout and does not restrict airflow to the sides of the…
Sticks to put on your Xbox controller to make it feel more like a drone controller.
The OG Xbox is a big chonker. Save some space and stand it upright. Bottom of stand has vent cutouts so the Xbox case can still breathe. I recommend placing rubber feet on the bottom of it to maintain air flow and so it won't slide around.
End Caps for Open V-Slot 2020 with Open Hardware logo. This is a remix from https://www.thingiverse.com/thing:398515 Zkrácená verze na 6cm pro sluchátka Print instructions Category: Audio Summary End Caps for Open V-Slot 2020 with Open…
XBOX Controller Stand This sleek and functional stand is designed to perfectly cradle your game controller, keeping your gaming area tidy and your controller readily accessible. Key Features Custom Fit: Precision-engineered to hold your…
The four year old design has been remastered for greater driving precision, faster printing and 97% less support material. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have…
Scanned a fancy rock, and cut out the shape of the controller using a scan of the controller.
A good friend of me needed a Controller and Headset holder for her new Xbox oneX. I searched but didnt find one that looks good for me. So i opend Fusion360 and did it myself. I used the Controller stand from agepbiz…
Stable controller stand (Xbox 360, Xbox One, Xbox Series controller)
The Nexus 70mm fan seems to be a pretty common cooling upgrade for the original Xbox. The stock fan is a proprietary 72-ish mm job that has a specific shape and these tabs that secure it into the back of the console. However there is no…
A very sturdy and clean design i made of a holder that clips on to my Xbox Series X to hold the Controller and Headset. The X infill is a seperate file and can (ofcause) be printed in various colors to match your style. You might have to…
Screw mounted holder for 2x Video game controllers. Works with Xbox 360, Xbox One, Xbox Series X/S, PS3, PS4, PS5. Purchase it here :) https://www.etsy.com/listing/1768995799/double-controller-holder-for-xbox-ps5
Made a remix of some popular prints to meet my need to store my controllers on HSW. By no mean I design these, juste cut ( to make it work, and make it smaller ) and fusion two items together to work … Made a remix of…
Hollowed out and stylized version of an xbox controller stand
i got really tired of thin pushers on 1914 bumper, that brake in like 5 min of usage. so i designed spacers u can print youself. they fit tight and not tend to break, cuz they are not part of bumper itslef. place seam on the back(up)…
Logitech G923 Xbox F1 wheel
There are many game console controller models available. I wanted a horizontal stand that could fit easily into a drawer, but also fit multiple controllers. I remixed io_roboto 's original controller stand using Fusion 360 to fit 4…
Stand for two Xbox One controllers with logo.
Made these feet to give the XBox some breathing room when it is on its side. I made two sizes. 8mm and 16mm. There is only one foot to print. Pick the size you want. Either 8mm or 12mm tall. Then you will print 2 and then 2 mirrored. A…
This is a remix (of sorts) of one of my own designs, the Nexus 70mm fan mount for the original Xbox. The Nexus 70mm fan works quite well in the original Xbox, however I've had folks ask me about using the Noctua 60mm fan instead. This is…
This is a 60mm Noctua fan mount adapter for the Original Xbox. It was created to replicate the look and feel of the original Xbox fan (there are a few different fan models, but this one is based off of the Nidec fan). Improved airflow was…
xbox controller wall mount
ETSY Enhance your ROG Ally gaming experience with this Xbox-style grip designed for the Z1E model. This ergonomic accessory improves comfort during long gaming sessions by providing a familiar controller feel. Perfect for handheld gamers…
Xbox controller Wall Mount on 2x screw
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required.
Print the letters with horizontal expansion 0,28mm for the best fit. No glue should be required, but its recommended for a good hold.
Not printed, straight scan no clean up or smoothing, literally as it came from the scanner. just for reference to see what the scanner is like. Category: Scans & Replicas
English: The Xbox Series X Controller and Headset Holder allows you to securely and conveniently store your Xbox Series X controller and headset near your console. This holder has been specifically designed for 3D printing and is easy to…
Custom Xbox One Controller Face Plate
Stand supports both: 8Bitdo Ultimate 2C and XBOX Series Controller
Xbox SERIES controller battery cover
![Xbox series X [S] controller mini wheel](https://media.printables.com/media/prints/157078/images/1468543_a9941f77-2739-4f1c-a938-4d727942ca80/large_display_xs_wheel_fs_start_157078.jpg)
