Liczymy pasujące modele…
Replica of a Z95 Headhunter at 1:270 scale. There are two Versions: The standard Z95 is based on its most common appearance, especially in legends. This starfighter has many different versions, so you might be familiar with a different…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A parametric battery holder for Nikon EN-EL18 series batteries Added a lid (also parametric)
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
Raise your speakers to ear level
Wydruk około 24,25 €–29,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser Behälter für Bosch Pastascheiben MUZ9PP2 schafft Ordnung im Schrank. Er besitzt ein Bajonettverschluss und hat an Dose und Deckel Rändelungen für den besseren Grip. Translation: DeepL This container for Bosch MUZ9PP2 pasta slices…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This RC handler came very handy to.. you know.. handle the RC. Not a lot of things to say about it, but some infos though : __________________ Technical info : PLA + / PLA is fine 0.3 mm layer height is ok 5 walls __________________ Other…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Das Reinigen der Pastawalzen Bosch MUZ9PP1 (PastaPassion Set) ist recht schwierig, da man die Walzen kaum drehen kann. Auf diese Weise können Nudelteigreste zurückbleiben, was ich unhygienisch finde. Mit diesem Knopf kann man die Walzen…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi! Because I got much more quality from my Sennheiser MKE600 than any other shoe mic - I've decided to upgrade my NX80 with the self made adapter. It should also work with other shotgun models, and for sure with all audio interface's…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
I would recommend printing this with the guided inserts facing the build plate and with support material on the build plate only.
This design is based on the excellent work of PyroGX . I printed his under desk mount, but found that with my unit being placed on the right side of my desk, the remote control was in the way, and anyway I don't use the remote, and also I…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
A bracket to mount the logitech z906 sound system control box under the table. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15 Infill: 15% Filament: Prusament PET-G Black Notes: I used…
When I bought the Logitech Z906, I really wanted to fix these speakers to my monitor. Having switched to a wall mounted ultrawide, I got kind of OCD about having nothing standing on my desk, and anyway these full range cone speakers have…
I made the holder a little beefier and smoothed out most of the sharp corners with filets. Printed on it back without supports
I designed some caps to cover the holes on the sides of the frame of my Kawasaki Z900 RS. The logo itself is not my design. The caps feature three places to easily remove them, even without tools. They might fit other motorcycles as well,…
Ich wollte meine Blinker Vorne an meiner Z900 SE umbauen und habe im Internet Adapter dazu bestellt. Diese haben mir erstens gar nicht gefallen bezüglich ihrer Oberfläche, ausserdem hatte ich die Falschen bestellt die gar nicht passten.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Keychain for Kawasaki Z900. Print Settings Printer: Flsun Q5 Rafts: No Supports: No Resolution: 0.1mm Infill: 100% Filament: Creozone TPU White Category: Keychains
The holder is divided into two parts, so it can still be printed in printers with a low height. It also saves a bit of time than if it were a whole part (you can print the holder in two days). With a little creativity you can also change…
First two pictures show this modell. Last picture shows original rubber cover of left side. The modell has also a little groove for 2.5 mm sealing ring to better stay in place by its friction.
I scanned the speakers of the Logitech Z906 with the Creality Ferret pro. You can use these models for your designs. They are very accurate (< 0.2 mm).
Nikon ZF , Z8, Z9 viewfinder eyecup replacement (tested on ZF) with slim 4mm profile (comparing to stock 6mm). Easy print with no support. UPDATE (07/08/2024) Corrected lock pin location and added triangular marker, added even slimmer…
Protector de pies laterales KAWASAKI Z900 - KAWASAKI Z900 Side Foot Protector
This is a remix of https://www.printables.com/model/193704-logitech-z906-control-unit-under-desk-mount I've split the model in order to fit smaller 3D printers such as the Ender 6 pro which I use.
Ein Drehkranz für größere fischertechnik-Modelle. Die Anbauflächen haben 130mm Durchmesser, der DK ist 20mm dick, die Verzahnung hat 90 Zähne, der Gesamt-Durchmesser am Zahnkranz beträgt 138mm. Die Mittelbohrung ist für die Aufnahme eines…
2/26/2023 - This is still a work in progress. Specifically the measurement wheel may be updated if full scale testing indicates a need. 3/3/2023 - added a base version with 608RS bearings in the wear areas. This version of the base…
I cut off the rail from 3DesignMJS' design, and stuck it on the relevant part of franckarts' design in tinkercad.
Nikon Z9 holder for the gridfinity system. It fits in a 4x2 footprint in a standard gridfinity base. There is recess that will fit a PD Capture clip plate with tethers attached. It will fit other arca plates as well but I haven't tested…
Voron Afterburner conversion for Zonestar Z9. Making use of 23mm length nema 17 pancake stepper included with the printer. Using same size m3 heat set inserts as regular Afterburner. Number of bolt lengths are different from the original…
This is an IO shield for a GIGABYTE GA-Z97M-D3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
Easy to print finder eyecup with built in 22mm thread for Nikon DK-17M or Tenpa 1.22x/1.33x Magnifying eyepiece. It is also compatible with 22mm thread of KPS and SMDV 1.35x Magnifiers. I'm using 1.22x Tenpa magnifier on Nikon ZF to…
TAPONES HORQUILLA DELANTERA KAWASAKI Z900 - KAWASAKI Z900 FRONT FORK PLUGS
Well, it finally happened. My S/O destroyed a thing. This time the victim was my satellite speaker. Specifically the holder of it. So Fusion it was and after about 30min + 40min printing time, it was done. Works like a charm. (Even tho,…
Just swap out the originial boppins under your seat. It will lift the back of the seat 5mm up. If wished, I could do different sizes as well. Print in TPU, 3 Walls, 10-15% Infill
I really like the Round Eyecup on the Nikon Z9, its way more comfortable than the default rectangular Eyecup. Both parts are really easy to print. Once printed, the TPU Eyepiece snaps onto the base. I reccomend a layer height of 0.15 or…
This hotend redesign is to allow Zonestar Z9 owners the ability to change their hot ends from their proprietary hotend to more effective hot ends in my belief. This is a first release and I encourage other Zone Star owners to test and…
I wanted my Logitech Z906 sound system speakers look more clear and neutral. The speaker design looked to much technical and not perfect for the living room. So i wanted a clean cover for the speakers. It fits nicely in the small gap on…
Tischhalterung für Logitech Z906 Die Tischhalterung ist für den linken und rechten Lautsprecher, die Halterung ist + - 45° stufenlos schwenkbar. Die Schraube ist eine Senkkopfschraube M5 X 16mm. Die Kabeldurchführung ist auf meinem Foto…
tightening tool for fixing nut zb5az905 (Schneider Push button etc)
Zidoo Z9X Z9S Stand I created this stand for my Z9X Secured it with magnets from an old hdd possible working with Z9S but I don't tested it Printed in Ender 3 pro with PETG 0,28mm layer height
Broke the finger oft the clutch switch during the installation of new levers. Will print it in ASA and PCCF for tests.
Zonestar Z9M4 fanduct it is for the single color orginal printhead
A mount to put the control panel of the Logitech Z906 sound system under an Obutto r3volution acrylic sidedesk. Insert between the metal and the acrylic plate, screw tight and put in the audio panel from the front and reconnect the cable…
hanging shelf (подвесная полка) для медиа приставки Zidoo Z9X. крепление с помощью двустороннего скотча. я использую прозрачную двустороннюю ленту. fastening with double-sided adhesive tape. I use transparent double-sided tape. печатал…
Adapter für Logitech Z906 Wandhalterung
Zalman Z9 HDD 2.5" mount plate.Zalman Z9 HDD 2.5" mount plate.
This is a cover for the indicator outlet of the Kawasaki Z900 (2019). The cover has to be glued into the slot.
I made this limitswitch to avoid little grabbing fingers get to my limitswitches and damage them. No need for screws or whatever, just clip them on, you can even keep the cable plug in place.
A low poly cover for your x axis motors on your Z9V5 printer from Zonestar. There are 2 versions, one as a whole and one in a split version so you can slide it on without having to remove the Nema stepper motor from the assembly.
The foot switch buttons on the Engl Z9 midi foot switch pedal are not a standard measure like a stompbox pedal is. They are actually rounded and have a different diameter. When designing this, I factored in travel movement so the switches…
Dell wyse Z90D7 (Zx0) mount for 10 inch rack. It uses 4x M6 bolts. Works as it should. Prevents the device from getting out of the rack in any direction. Unfortunately, due to the size of the wyse itself, It occupies 1 ⅓ U.
USB Hub: https://www.amazon.com/dp/B09GJXVHVK?psc=1&ref=ppx_yo2ov_dt_b_product_details
Hotend Mounted Endoscope Camera for Z9M3 **I have video, but need to figure out how to upload, just added a picture, and once next print job is finished I will measure the point were my Nozzle is so if you wanted to make one you would…
Here's a simple motherboard case for the zonestar motherboard that attach to the power supply. There's emplacement for 2 80mm fans You'll need threaded inserts and some screws It print in 2 parts This is a simple version feel free to…
Supporto Freccia DX per Kawasaki z900
The windshield Mini-Tour Plus available from Louis.de for Kawasaki Z900RS (other bikes too) has a serious flaw: it pitches backwards towards the rider under wind pressure. The windshield itself is ok, but the holder included with it is…
This is a closed eyecup for Nikon Zf Z8 and Z9 to protect your viewfinder from dust and breaking!
Krytka spodního porfilu žaluzie Z90 od výrobce KASKO. Doporučuji tisk z ASA - umístění venku. Pravá varianta. Na levou stranu nutné zrcadlit ve sliceru. Update: První kus jsem vytiskl z PLA a umístil do žaluzie, i přes vysoké teploty, tak…
A duct for the Electrolux Oxygen Air (Z9124), that re-direct air the air horizontally. Print with the flat sides facing down on the bed. Use super glue (CA) to join the parts. It works fine for me, though for speed 3 and 4 (max), I need…
This is an IO shield for a GIGABYTE GA-Z97M-D3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
Hi! Because I got much more quality from my Sennheiser MKE600 than any other shoe mic - I've decided to upgrade my NX80 with the self made adapter. It should also work with other shotgun models, and for sure with all audio interface's…
Support pour boîtier de contrôle Logitech Z906 : intégrez le boîtier à votre simulateur pour avoir tous les réglages à portée de main ! Le fichier est dans l'orientation idéale. 3 Modèles inclus : 1) Clip Profilé 8040 2) Clip Profilé 4040…
