Liczymy pasujące modele…
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Raspberry Pi 0/02 3.5 inch Touchscreen Case My take on a case for a Raspberry Pi 0 with a 3.5-inch touchscreen case. I have modeled the styling on the Ratrig vMinion styling. This is compatible with Generic 3.5 touch screens such as those…
Remix of sirhc's case found on Thingiverse here . This is optimized for mounting on the side of your printer, either on a 2020 or 4040 extrusion. M3 screws are used to join the two case halves. The mount installs to the lower half using…
install klipper on orange pi zero2 due to the raspberrypi shortage raspberrypi 3B alternative https://www.aliexpress.com/item/1005004177544221.html
Will flesh out a better description later. Added hexagon mesh to base to look cooler. Added small hole on top for DC wire to power led lights. Remixed Pi Zero cover to have hexagon mesh. Fixed thin walls in top of base (around where…
I used the rpi Zero Model by Henry Levesque https://www.printables.com/model/988094-raspberry-pi-zero-2-w to check my model
note: This has not been testet yet, but if so it will be updated here. Let me know in the comments, if it worked for you
Slightly modded version, added some holes and removed the integrated fan guard. Category: Electronics
You need 8x M2x4 4x M2x4 Heat Thread Insert 4x 2x8 Magnets
Please consider leaving a like. or just take it and slink quietly out the side door. ------------------------------------------------------------------------------------------------------------- UPDATED - Added Pi Zero 2w mount as we can…
If you're tired of raspi scalpers and decided to go for an orangepizero2 on your voron build, you're in luck! This bracket adapter replaces the one file that was made for the raspberry pi adapter, meaning you can still use the lower part…
I needed a box to hold tightly three 8bitdo zero2 controllers, to bring on the go with my steamdeck. They are stored upside down, with the buttons protected in the empty space at the bottom of the box. There is no locking mechanism, when…
This print is made for mounting a Raspberry Pi Zero or Zero2W case with zip ties in the rear of a Bambu Lab X1, P1P, P1S. Tested with print from this link, but will probably work with a lot of other Pi cases :-)…
I needed to mount a Pi zero2 into a Pi 3 case, so I quickly sketched this up in Onshape.
This is similar to a Raspberry PI Zero2 W case which I recently remixed. However, once I mounted the case, I found a number of opportunities which lead to this design. The main modifications were implemented to make the case slimmer and…
Remix of the only case i found for the pi ZERO 2W with pogo hat RJ45. https://fr.aliexpress.com/item/1005003433746408.html?spm=a2g0o.order_list.order_list_main.17.360d5e5bcuYKy2&gatewayAdapt=glo2fra I made a remix to be fixe onSidewinder…
A case to fit my Orange pi into, my idea was to mount the Orange pi and the expansion board onto the base and remove the cover when I am using it, I figured there would be less heat build up when not enclosed and the cover would protect…
Download : Din Rail Clips BOM : 6X M3 5mm SCREW
Fits 1U, 3mm holes for standoffs. 2-3 Walls, 15-20% Infill.
I like the design of this simple case, however I wanted it to mount to the 2020 rails.
skr1.3, orange pi zero2 mount for voron v0.1
I designed it for an Odin so it has the same mounting holes as a Robin Nano V1.
For reasons I'll never understand, the parts you can get in the Australian wet tropics are never what everyone else can get. I don't know, maybe it's the crocodiles. For this reason, and because of where I have my filament spool, I needed…
Just a really simple mount for a 20mm fan on an Orange Pi Zero2. The fan is screwed on with m3 nuts and the whole print screws down on the board with m3 screws. No need for any supports.
Raspberry Pi Zero 2W Custom Case for PiHole with Waveshare Ethernet/USB Hub Hat This meticulously designed case is tailored to house the Raspberry Pi Zero 2W (no headers) along with a Waveshare Ethernet/USB Hub Hat (B), offering a sleek…
I try find some nice and simple box for my electronics. But I didnt. So I try make my own. This is second try. When I use wood to build my Enclosure, I try use same desing to printer box. So I use beech cladding strips for walls on sides.…
I design it for my OPI Zéro2 It was designed to clipping on a DIN Rail in electrical panel
Items needed: 4 M3x4x5 heated inserts 4 M3x30mm 2.5 hex bolts 4 Printed spacers (included in files) Also included solidworks files for those capable and able to modify as you wish. :D I used ABS (recommended or similar)
Minimalistic Pi Zero2W Case , using a generic usb to ethernet adapter. Just use any m2.5 screws and have fun.
Changes made from the original design Modified the original model to fit the nextion discovery series 2.4" screen and a Pisugar 3. Added a cutout for a 25mm fan Modified the outlet to fit a usbc port. Added supports to the bezel arms as…
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used the rpi Zero Model by Henry Levesque https://www.printables.com/model/988094-raspberry-pi-zero-2-w to check my model
Case for Raspberry Pi Zero2W. Two type cover include. Hole for M2 Self tap screw. Hole for M2 Threaded inserts. M2 5mm length screw are best.
