Liczymy pasujące modele…
Bei dem Zippo 1932 Replika ist das Problem, dass es höher ist als ein normales Zippo. Beim Original 1932 Replika-Zippo ist deshalb schon ein Abstandshalter dabei. Leider ist dieser zu klein, so dass der Double Flame Jet Einsatz zu tief…
Dieser formschöne Halter bietet Platz für 8 Zippo-Feuerzeuge. Die Ausschnitte sind 40 x 15 mm für große Zippos. Die kleinen Zippos können mit dem beigefügten Adapter 33 x 13 mm präsentiert werden. Da das Modell nicht besonders stabil sein…
This takes about an hour or so to print. It is a fidget toy made to look like a Zippo Lighter. I do not want this model to be copied but I do want people to remix this and modify it, but you have to credit my design. Like for example you…
Ever wanted to play with a Zippo lighter, but without wasting the flint and fuel? Now you can! This is a magnetic fidget toy that resembles a Zippo lighter. It makes a similar sound as the spark wheel of a lighter. For it to work, you'll…
Uses 1.75mm filament for a hinge pin. It is better printed with resin as FDM broke too much. I will add a step and fusion 360 file for modifications.
This remix is 1.5mm high (half of original), has improved fit and added small lip to help with lifting it up to fill your Zippo with fluid. Print with TPU (I used Creality CR-TPU), standard settings, there will be no infill whatsoever so…
This sled ensures that the lighter is placed properly in the cutting space. I also included a .svg template for you to use when making engraving designs! This item is parametric, meaning you can change how many slots it has, the border…
I designed this zippo holder originally for my chest pouch that I wear while I'm working on forest fire, you can see a picture of the chest pouch above. I needed some way to carry my zippo that was quick and easy to get to but yet would I…
Simple to print Need Supports at the hinges The Pin is no need to print. Use some Filament instead.
The opening mechanism works and feels almost exactly like a real zippo. The spring for the latch can be replaced easily. The wheel is clicky and feels like striking a flint. The inside comes out when pressing on the little hole in the…
Printed with PLA, 10% infill, no supports
I created a Zippo lighter case for the standard size lighter. It was inspired by https://www.thingiverse.com/thing:4222731 but I started from scratch to make it fit better. It uses a piece of 1.75mm filament (or similar) for a hinge pin.…
A zippo lighter stand for gridfinity. has choice of putting magnets in the bottom to help guide light into place but doesn't need them. Uses standard 6x2mm gridfinity magnets.
Holder for a ‘classic’ (1 ½'' x ½'' / 38mm x 13mm) Zippo lighter on an IKEA Skadis pegboard. Step files available for modification. No supports!
This model is an organizer for multiple zippo type lighters (original and similar clones), from 2 to 5 spaces in a row to save space. Perfect for placing in organizer boxes or adapting to EDC organizers. Feel free to download the model…
Whether you have many Zippos, or one you don't use anymore, repurpose it with this extremely simple print. It is a very quick and easy print and the size dimensions fit perfectly into a zippo with the insert removed. Would be great for…
I don't have any Zippo's so can't test fit it. But i will research it.
Had a few Zippo lighters scattered about the desk space, so made a simple display stand that can hold up to 6 lighters while taking up only a smallish footprint and still being easy to access.
Zippo belt clip with lock to prevent the lighter from falling.
Constantine St. Benedict Zippo Stash Box.
Stand for classic Zippo lighter. Display your lighter in a modern way.
Loved the original design but wanted to add the Zippo logo to it. Same print instructions as original.
Quick gasket to help with fuel evaporation. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: TecBear TPU Category: Tools
I adapted Geekdad_3D's Zippo lighter case model to accommodate the charging port for the Zippo arc insert. It uses a piece of 1.75mm filament (or similar) for a hinge pin. While Geekdad_3D suggests resin to promote hinge strength, I've…
Updated 17-10-23 Bottom gasket flint screw hole clearance increased, incorporated a fillet to the sleeve logo to lessen the effect of the overhang and give a cleaner look. Small quality of life improvements to lessen fuel evaporation for…
Here are the 4 different designs I have made to display Zippo lighters
Lovely case for your insert 😉 Print In Place ✅ Two variations: Zippo v1.2 - top arc, bottom marking. Zippo v2 - right angles, oblique lines at corners. Personal use only⚠ your support is important to me 🫶 👉 For Commercial license, check…
ACHTUNG enthält einen Fehler !!! ZIPPO Gürtelhalter SORRY da hat sich wohl bei mir ein Rechenfehler eingeschlichen. Wenn ich dafür ausreichend Zeit habe werde ich das mal korrigieren. Bis dahin könnt Ihr versuchen die zu lange Achse (nur…
I designed this simple display rack to be mounted on my wall using Command strips. My idea was that I could print more as my collection expands. The interior slots have a slight angle to them so that the lighter will lean back against the…
In diesem formschönen Halter finden 4 kleine und 4 große Zippo-Feuerzeuge Platz. Die Ausschnitte sind 33 x 13 mm bzw. 40 x 15 mm groß. Da das Modell nicht besonders stabil sein muss, habe ich im Prusa Slicer je 3 Perimeter vertikal und…
An evaporation gasket for the filling area of a slim zippo. Printed in Eono Black TPU at 0.2mm on Prusa Mini +
Here is a zippo version of Finn's lighter that I made for cosplay. (Take a look at my library for more) Instructions: -Both parts of the skin must be printed with a maximum number of walls (8 will be sufficient by default) -Supports have…
I created a Zippo lighter case for the standard size lighter. It was inspired by https://www.thingiverse.com/thing:4222731 but I started from scratch to make it fit better. It uses a piece of 1.75mm filament (or similar) for a hinge pin.…
Store up to six Leatherman bits (12 tools) in a Zippo lighter case. Idea of Laura Kampf: https://www.youtube.com/watch?v=zIqTdPbxGBY Print Settings Printer: Fabrikator Mini II Rafts: Yes Supports: Yes Resolution: 0.2 mm Infill: 20 %…
I noticed that my zippo lighter needed refilled more often than I liked, so I created this baseplate after seeing similar products online. It has fingernail notches on both sides so you do not need tools to remove it, unless the screw…
I was recently gifted a Zippo lighter that would mostly sit on display on my desk. I decided it needed more life than that so I designed an insert that would hold two yubikeys. Each slot has a bump to securely hold the yubikeys in place…
Keep your SD cards safe on the go with the stylish Zippo case! The zippo case allows you to keep up to two standard sd cards, feature an grip mechanism to stop the cards from falling out, as well as shuts cloosed woth powerful magnets.…
Zippo lighter with flame for DieHard Christmas display
Keep tool bits inside your Zippo case and use them with the locker.
Best done slowly and with support.
#### WIP, still testing / refining details #### Came with this idea after finding official zippo bit adapter, that left me bit disappointed. After few quick sketches, this adapter was born. Fits original zippo case as well “tactical” ones…
The toy has Crossed Swords on the front of the body. the lid and the body both have hinges that snap together. on the front of the lid is written the quote “always the victor never the victim”. both the body and the lid are hollow on the…
Zippo fluid can holder that is compatible with the Gridfinity system.
Support pour Zippo Le fichier contient 3 objets pour faciliter le choix des couleurs. Ici imprimé en 0.08. Si vous aimez, n'hésitez pas à lacher un cœur et à publier vos réalisations.…
Gridfinity 2x3 Zippo holder or stand for 3 Zippos. For the Bin base, I used the Fusion360 Gridfinity extension.
Want to keep things in a Zippo shell without giving up that satisfying snap? Want to be accused of smuggling? Have I got a Thing for you. It's non-destructive. Just pull out the bottom pad, cotton, and wick from your lighter insert.…
Zippo lighterstand I have one with no brand and one for ST Dupont too: https://www.thingiverse.com/thing:4841429 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Sunlu PLA Category: 3D Printing
I designed this to display a zippo lighter that was gifted to me by my late uncle. It's a nice fit and shows off the lighter well.
I am not particularly fond of replacing the original metal case with plastic. Therefore, I designed a simple cover to protect and/or customize standard Zippo lighters. This cover is affordable and allows for easy replacement with…
Case for 20 king size cigarettes with magnetic Zippo slot. Note: Zippo cases are made of brass and therefore non-magnetic, the fluid insert is magnetic, might not work for butane inserts. Use 15 6mm diameter by 1mm thick neodymium magnets
It is simple and fast print. It uses only 3.32m of material with 20% infill density and 4 infile line distance.
Best done slowly and with support.
Halter für Zippo Feuerzeug am Gürtel Filament : https://www.dasfilament.de/ Your own €€ Special Start Site, Affiliate, Ebay Watcher, TV, RSS Forum, Organizer ....... https://www.klamm.de/user/michardt-49882.html For Contact…
Remake of another build with 2 pipe holders. This make has one pipe holder and a space to hold a zippo pipe lighter.
Zippo case designed for FDM printing with sturdy (enough) hinge. Use filament as hinge pin. Different designs available, will be adding more. Note: snug fit, for best result/fit calibrate printer for precision (extrusion, skew precise…
Neat way to store your pipe accessories with an easy way to access your zippo
This is a display stand designed for Zippo-style lighters. It holds up to 12 lighters in a raised layout that ensures full visibility of each piece. Nothing sits in front of the lighters, so every design, engraving, or embossed detail…
I made this zippo lighter holder to store my zippo so that i dont loose it so often. I'll hopefully soon make versions that hold multiple lighters as my collection grew recently, please send your requests, i'll be more than happy to model…
A snap-in clip for your Zippo. Print as shown in the screenshot. Please be careful not to get stuck with the clip and lose your Zippo
Základna pro dva kusy Zippo ohřívače rukou, dvou plechovek benzínu, nálevky a zapalovače. Base for two Zippo handwarmers, two cans of lighter fluid, funnel and lighter. Print instructions Jednoduchý tisk. Můj kus jsem tiskl z PLA vrstvou…
Wanted something for my Zippos so I made something. Holds 5 Zippos and the fit is really snug. You have to push them in and they will not fall out even if you flip it upside down :D Fuzzy skin with the matt filament looks good but is not…
A holder for 2 ZIppo Fluid containers in the Gridfinity System
Small extracts 3d objects from larger projects to use for own Projekts, that might be helpful.
I made a Zippo styled lighter prop that lights up. This is meant for a SLA printer, but you might need to sand the parts to get them to fit together properly. The LED and lighter part are friction fit, the button and hinge are super glued…
About Users of the Zippo hand warmers know it is important to let the hand warmer rest for 2-3 minutes after filling and before lighting to let the fuel soak into the cotton and let it start to evaporate to react with the catalyst. This…
A plate to insert into the bottom of the Zippo to seal it and prevent fuel evaporation. Use an M5 fan screw to seal it.
Holder for a ‘classic’ (1 ½'' x ½'' / 38mm x 13mm) Zippo lighter on the HSW system.
This is just an alternative to the blank base model of the cover. Find the suiting lid of the cover here .
Gridfinity Zippo lighter display and storage. .2 layer .4 nozzle 4 walls, top and bottom 30% infill triangles changed color right when Zippo started printing.
Angled or Flat Zippo Holder
I made my own fidget zippo because I was always playing with a friend's real zippo and I didn't want to ruin it. Making this model took me awhile because of the hinge, but finally I got it right. Since it needs a final assembly you can…
Made for two zippos to sit overlapping without touching, made because i have an ugly one and a nice one but want to keep both in the same place. Print however you want, im sure you know infil doesnt matter, but in the picture i did use…
Halter für Zippo Feuerzeug am Gürtel Filament : https://www.dasfilament.de/ Your own €€ Special Start Site, Affiliate, Ebay Watcher, TV, RSS Forum, Organizer ....... https://www.klamm.de/user/michardt-49882.html For Contact…
A TPU cap that goes over the catalytic burner. It is only useful if you are willing to pop the hot catalytic burner off using the top half of the handwarmer to first turn it off. Putting the TPU cap (or any flexible filament) on the…
🔥 Zippo LED Sign with Flickering Flame Effect – Light Up Your Space! 💡 Bring your creations to life with this fun and eye-catching 3D-printed Zippo LED sign ! This print features a white glow for the letters and a flickering flame 🔥 to…
Schlichter Zippo Ständer zum Ausstellen eurer Zippos. Nur verwendbar mit Zippos ohne Frontplate! (Only useable with Zippos without Frontplate!) Print settings: HF0,4 Nozzle layer: 0.1 perimeters: 3 Infill: 10% Supports: No
A convenient 1x1 Gridfinity holder for your Butane Fuel from Zippo. I had this sitting on my desk, but then… Gridfinity! Everyone loves a new Gridfinity. You can print these pretty light (5% infill) and I did this at very big layer…
Fits the exceedingly popular Honeycomb Storage Wall system by RostaP. This is a holder for them as has a collection of Zippo lighters, or similarly shaped fire dispensing objects. Available in 1, 2, 3, or 4 column wide versions which hold…
Added ribs inside the bottom case to stop the insert popping out while opening and closing. This fits my butane zippo insert perfectly and I'm assuming it will fit other zippo inserts, if it doesn't please let me know.
The container has 4 card slots. When opened, the cards rise up in steps. Assembly. The holder consists of 5 parts. First install all the internal elements, then install the side wall. The side wall is attached using regular filament (the…
This 3D model is a protective case for a 5 ml perfume bottle, inspired by the classic Zippo lighter shape. Its exterior mimics the clean, rectangular form of a Zippo-style lighter, making it discreet, compact, and easy to carry in a…
A modifiable zippo carry thing. Can be attached to self-made attachments. In the files you may find the dimensions and distances between holes in the back. All mounts use M3 bolts with 5.5 mm diameter head. Happy printing
Simple stand for your special Zippo lighters, fast and expandable
Further design modification of the Zippo bit safe by Laura Kampf . This one is based on the revisions by WayofWood . A friend wanted one that would take the shorter, single tip bits that are only 1" in length. He didn't need to hold more…
a simple holder for your Zippo lighter
10% infill .16 layer height PLA Ender 3 V2 Cura Slicer added filament change at layer height 28 added a slit on the back so you can have it vertical or horizontal
Zippo lighter stand. Print only with organic supports.
Bed Temp,50, Nozzel Temp,200, Infill,30%, Support,yes logo is glued on.
id like to make more if there is any interest in it for any zippo/ligther
I modified the original to use it on my Skådis with t-nuts
This base holds 12 zippo lighter in the box, 2 lighter fluid and 1 space for miscellaneous items like flint, wick, etc.
Nothing hugely inventive here. Uploaded on the off-chance someone else might want both their favourite lighters stored in a low-profile way (suitable for a low-profile drawer such as the one I'm using (Flexispot desk).
![Zippo Sled/Frame for Laser Engraving [Parametric]](https://media.printables.com/media/prints/37596/images/371404_766640a4-15f9-47ac-a829-ef304d70ca54/61786212252__20a5fd51-6daf-430c-bd81-ff0c759441ea.jpg)
