Liczymy pasujące modele…
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
This is a remake of my 70 mm PSU cover for the CHENGLIANG P360W24V used in the Sovol SV06 (https://www.printables.com/de/model/341847-sovol-sv06-psu-case-cover-for-silent-70-mm-fan-and). By using a 92 mm fan, the fan speed can be further…
This is a case cover for the CHENGLIANG P360W24V power supply from Sovol SV06, with a hole for a 70x70x10 mm fan and a step-down converter (LM2596 HW-411). There are holes for fusible nuts (M3 with 4.6 mm outer diameter). Unlike the…
After I made the 70 mm and 92 mm Version of the PSU fan case, I got a request for a 80 mm variant from PatrickE which is exactly this one. I did not test it myself, but PatrickE confirmed that it fits and also provided the pictures, thank…
This is a remix of felixna's model with an added slot for the fan's cable as suggested by Thomas Albrecht in the comments of the original model. The notch is measured from a Noctua Redux fan, but it should be very similar for most fans.…
This is a 92mm fan mod for the common Cheng Liang P360W24V power supply. The assembly requires you to have the following items: 4x M4x30 or M4x40 (with spacer) flat head machine bolts 4x M4 washer 4X M4 nut 92mm fan optional mesh for 92mm…
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
I made an extremely unnecessary upgrade to my Kobra Go PSU to make it quieter at idle and fit a noctua 6025. I'm a Noctua fanboy, and this fan at 12V gives almost the same CFH as the stinky one that was in there already. I just cut the…
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
I designed this for the Cheng Liang P360W24V power supply, commonly offered with Creality's Ender 3 printers, for a stand-alone mount off the printer. It should fit other 'thick as a brick' printer power supplies of similar design.…
The power supply that came with my Anycubic Mega SE is one of several variations of the Chengliang P400W24V, a 400W 24V power supply. Because I switched to dual-Z, I wanted to relocate it from it's stock location behind the gantry…
After a quick search, I couldn't find anything that fit this power supply so I made my own. This is a quick and easy mounting bracket that attaches to some DIN Mounts I printed from this model since I'm using a Manta M5P in my build. They…
