Liczymy pasujące modele…
Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
2026-06-22 Edit: Added an offset relief hexagon version with a 21 mm offset to account for a PCI-E riser. Thanks @ichigio for the request! 2026-01-14 Edit: Added a middle ground, with relief hexagons. 2025-09-19 Edit: Added a solid…
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
This model allows for the active cooling of most varieties of X540 10GbE NICs, including a modified model that works better on some of the actively cooled units that are more prone to fan failure. It positively engages with the metal rail…
Mine came with only a half height slot so I made a full height PCIE slot holder for them. Exact model is from super micro - Intel 82599 10 GB Dual Port Network Card
A low profile bracket to suite the Dell Broadcom 57711 10gb network card. Part numbers KJYD8 / 0KJYD8 Print with tree supports.
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
Many forum posts about issues, where the AD3212KB-K71 fans on actively cooled Intel X540 cards are loud and/or unreliable. For my X540 cards, I designed this adapter to swap out the loud little fans with quieter 50mm fans. The bracket is…
Full instructions and description for creating this magnificent work of science located here: https://ganon.club/index.php/2019/04/04/getting-10gbps-on-a-skull-canyon-nuc-without-thunderbolt-3-ngff-to-pcie-x4-riser/ In summary: Print this…
INTEL X540-T2 10GB PCI network Card FAN MOUNT SCREWLESS Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: No Resolution: 0.3 Infill: 25% Filament: 3D Solutech PLA Red Category: Computer
Simple rack mount (left side) for a mini 10gbit/2.gbit switch. I'm sure its rebranded under other names as well Brand: Motiedot Model: K0402WS Dimensions: 133mm x 67mm x 33mm
40mm Fan shroud designed for Intel X540-T2 10GbE NIC's, will also fit some X520 models, 1U and 2U variations, options for extended heatsink coverage and bottom/top fan mount. 2U card fans are friction fit or can be mounted with…
My HPE Ethernet 10Gb 2-port 560SFP+ Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the…
Full height PCIe bracket for Inspur YZCA-00431-102 network card Heavily modified remix of this model
Half Height, low profile PCI bracket for HP NC523SFP 10Gb 2-port network adapter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Infill: 10% Filament: 3D Solutech PLA Silver Metal Notes:…
Simple low profile bracket for 57810S 10gbe version which I am using with no issues. Print it screw hole side down, with support. I used ASA, but PLA would do. Not sure about PETG, might be too flexible. For reference, I used an enclosed…
8 Port X 10Gb Base-T Ports, NICGIGA 10Gbps Network Switch Required a frame to mount the Ethernet switch to a wall. The Size has Been Adjusted from original to Fit different Device. 182mm x 45mm Very Tight Fit, Just Force it. I printed on…
A quick design to hold a QNAP QNA-T310G1S or QNA-T310G1T ( https://www.qnap.com/en/product/qna-t310g1s or https://www.qnap.com/en/product/qna-t310g1t ) on a Skadis panel. It uses the Universal Hook…
This is a clip-on 40mm fan shroud for the Inter-Tech ST-7211 10Gb SFP+ Network Card. Print with supports -→ screw on fan -→ clip onto heatsink In order to connect the fan to the network card you may need so solder a JST-XH 2 Pin connector…
[Printed in Silk Silver, 10% infill, .2 height] - Original Reddit threat on /r/NUCLABS: https://www.reddit.com/r/NUCLabs/comments/dnzeu1/intel_nuc_5i3i5i7_series_10gbe_connectivity_debut/ You want 10Gbe connectivity in a Gen 5 NUC, and…
My HPE Ethernet 10Gb 2-port 561T Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the model. I…
Mounting adapter for the IOCrest 10GBE m.2 NIC PCB. Fits in one of the 19mm holes in the Formd T1. Infill - 40% Supports - Yes, block out mounting holes Adhesion - No Print with mounting hole side flat on printbed
I run Intel NUC's in my server rack for my virtualization. I wanted a way to properly hold the QNAP thunderbolt to 10gbe SFP adapters rather than just resting them on top of the NUC. The print can hold the adapter in any direction…
It just barely fits inside a 10 inch rack. 222.5mm rack wide. The mount holes fit m5 screws. Face mount plate is 4mm. A fan can be mounted to the sides with zip ties inside.
1U mount for GigaPlus S25-0802 network switch.
What it says on the can :) Do visit the original author's model and give theirs a like too!\ In short - a place to store your screwdriver, 3 regular modules, and the 10GbE module, or a fourth regular module.
Support pour switchs Ubiquiti Unifi 5 Port 10Gb Flex 8 Port POE Flex
Acasis 10-port 10Gbps USB Hub OpenGrid Mount. Uses M4 hardware.
Use everything from Version 2, except for the connection to the 60mm fan. Glue the two blower fans (4020 models) together so that the inlets face opposite directions, and the outlets face the same direction.
This is a remix of the original “Intel NUC 12 Pro Innodisk EGPL-T101 cover and accessory port kit” , adapted to fit a FENVI 10GbE module based on the Marvell AQC113 chipset . I built this because I wanted a small, quiet and…
Customized in OpenSCAD to fit the Supermicro AOC-STGN-i1s card
10" Half-Width Rack Mount for https://www.aliexpress.com/item/1005010289114377.html . The top and bottom panels of the switch need removal prior to fitting it into the mount. There is very little room for the top tab of the keystone…
This is a remix of the original “Intel NUC 12 Pro Innodisk EGPL-T101 cover and accessory port kit” , adapted to fit a FENVI 10GbE module based on the Marvell AQC113 chipset . I built this because I wanted a small, quiet and…
A mounting system for IKEA Skadis pegboard and a Horaco 10Gigabit SFP+ switch. switch dimensions are 125mm x 222mm x 28mm Designed for vertical mounting and reversible. Just mount bottom cap, insert switch then use top cap to lock into…
The AT2 10Gbit Network Card gets very hot under load - I messured over 60°C. So I designed a heat shroud which uses a 60mm Fan to direct the air over the cooler.
This card is a beast, its fast, but it produces heat like crazy. Version 1 works, it cools the card, but it takes up a lot of space. This one uses some other areas of the case. The fan is mounted ⅓ into the right slot, ⅔ into the left…
