Liczymy pasujące modele…
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Wydruk około 5,82 €–7,11 € nettoWstępna wycena jednego wariantu
A minimal adapter to take your Intel LGA 115x socket coolers and put them onto AMD AM4 socket CPUs. For the AM4 side, screw in like normal, on the LGA115x side, use M3 nuts and bolts to secure. DO NOT print this in PLA! PETG or ABS/ASA…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have a Prusa 3D printer, you probably already have enough square M4 nut s. You need 4 in total. However if you don't have them on hand, the square nuts used are ~6mm width, ~2mm thick. Push them to the slots and they will create a…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: This modular rack can be printed on any small 3D printer. If you keep the printing position and perimeter numbers as defined in the included 3mf files, you will not need supports when printing. CZ: Tento modulární rack lze vytisknout…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
I really like the overall design and the comfortable grip shape of the original. This is my slightly improved version of a sanding block based on PointNemo's design. I printed mine with eSun PLA matte mandarine which has a nice soft…
I print this with PET-G at a 0.3mm layer height, works great.
I scaled it a bit up so the CPUs fit with no force and created the 2 by 2, 3 and 5 variations. Tape can be added to form an easy pull tab on the cover. I have printed 3 * 2x4 (with 10% infill) at a time on my Replicator+ and it worked…
Remixed from a Thingiverse file. The original file didn't have enough clearance for the Heat-pipes, which I have fixed.
Socket 115x replacement backplate for Dell coolers that normally mount directly into the case. This part prints fine with 20% infill and 4 outer walls for extra strength. PLA should be fine temperature-wise, but more a heat resistant…
I modified the model to fix the problem with the oval hinges. You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
A simple holder for Intel processor with LGA 115x sockets. These are: LGA 1150 LGA 1151 LGA 1155 LGA 1156
Adapter to fit an oldschool Zalman CNPS 9000 CPU cooler onto a newer 115X Socket like 1151 in my example. I used a generic backplate which accommodates the m3 screws. Just normal nuts with a non electric material inbetween the mainboard…
i have to fix my customers pc with broken psu (caused probably by shorted fan), having lots of spare socket 775 fans and not any 1156 one in hand, ive made one to fit original heatsink and modified 775 fan. board is Asus, but top part…
I remixed the model to include a hole large enough for filament to be used in place of a finishing nail.
This is a 65x115x15 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 65mm External diameter : 115mm Width : 15mm Balls : 14 POM ball…
got a bunch of scrap motherboards with CPUs in them. CPUs worked fine but needed a way to store/ship them, so i decided to mount them to the heatsinks to make them more convenient. fits most CPUs 37.6mm Category: Computer
You definetly want to print this out of some more high temp material like ABS or ASA. It uses 4 5x3mm Magnets to secure it to the front but i will hold pretty tight even without the magnets. The area around the internal usb port has a…
When you drop your wife's favorite mirror swivel stand and break it, print her a new one.
Isolation "plate" between backplate of LGA 115X sockets and it's motherboard PCBs. Used it with stock HP cooler PN: 644724-001. It's metal backplate is usually glued together with PCB by double sided tape so it's naturally isolated from…
Pretty simple design. I wanted something that was stackable and optimized for shipping. I made a single CPU version and a 9 CPU version. All versions are stackable. The one with “Tight stack fit” in the name was a first revision of the 9…
A clip-on mount to attach a 92mm PC fan to the Silverstone NT07-115X CPU Heatsink for better cooling air flow. It works with either a 92mm slim fan or regular fan, and increases heatsink height +18mm or +28mm (3D printed mount is +3mm).…
These spacers close the gap between the cooler bracket (CPU side) and the mainboard. Without them, there is risk in flexing/cracking the board if over tightened. Designed for a ASRock Rack 1151 ITX board, these may or may not be the right…
It allows mounting the old but very good QC-80 Cu cooler on the LGA115x socket.
Box 65x115x40 with 4xM5 holes and with Banana connectors holes Ø6mm
I enlarged the cut-out on the lid to fit an i3-7300T. Based on Zabe797's filament hinge remix of the original LTT model.
A CPU case for LGA 115x Intel CPUs. It features a clip to hold the case shut and a hinge. Tested to print fine with Elegoo PLA+ and Overture PLA Pro, and doesn't require supports. Printed with 0.2mm layer height and 15% infill. Materials…
This model was designed to fit an Elegoo Centauri Carbon 2 filter, but can hold anything up to 115x115x20 mm as long as it's not too small. I chose this filter because it is close to the size of the Makerbot Sketch air filter, which is…
These spacers close the gap between the cooler bracket (CPU side) and the mainboard. Without them, there is risk in flexing/cracking the board if over tightened. Designed for a ASRock Rack 1151 ITX board, these may or may not be the right…
Simple template to route out recess for hinge Habo 571 version 115x33
