Liczymy pasujące modele…
NEW - now available for clip together baseplates If you want to save some filament on this print I added a version that uses my clip together baseplates https://www.printables.com/model/633086-gridfinity-clip-together-baseplates/files To…
I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications. Two models are proposed 11-22l samla box clip v1 Tested with 11l…
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
Designed for supportless printing with 0.6mm nozzle and 0.2mm layer height. Overhang angle is 25°. Mount holes accept 2.9mm flat head screws.
Motivation I've got several requests to adapt my design of the clip for the larger 45/65l boxes ( Never lost Ikea Samla Clip (45l + 65l) ) to the smaller boxes 5l/11l/22l. So far I didn't use the smaller boxes as dry boxes and until…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
I was looking for clips to secure the lids on some of my IKEA Samla boxes and came across many, including this one by Canislupus . I really liked the idea of the design but there were a couple of things I wanted to change so I remodelled…
EN: This is a print-in-place swivelling and rotating wall bracket compatible with the Xiaomi Aqara RTCGQ11LM motion sensor. The Xiaomi PIR attaches directly to the rotating base of this wall bracket, replacing the original battery cover.…
I designed this case in Fusion 360 for an Aqara door sensor mainly to use it for projects where I use this sensor as a general purpose zigbee sensor and I prefer something a bit smaller. There are 2 versions, one with a hole and one…
This is a 3D printed gasket designed specifically for the IKEA Samla 11L and 22L storage boxes. It helps improve dust and splash resistance by providing a flexible sealing layer between the box and lid. Two versions are included: Precut…
I started out printing some of the "The best one" clips from Thingiverse but while I really liked their haptics, I didn't like the fact that they just fall off and so when you open containers often, that is a bit annoying. I then found…
11Lb Spool Adapter for smaller Lincoln Welders. Will probably fit other welders. Category: Tools
Simple clip-on box for Aqara door sensor to measure the impulses by REED sensor from gas meter. You have to unsolder the REED sensor and use extension cables to connect it back to the board. Works perfectly.
EN: Grid for plant propagation box. Samla from Ikea is used as the box, size 11 l. The grid is placed at the bottom of the box and separates the plants, or their pots, above the water surface. The water under the plants serves to increase…
Intro A compact, modular Stevenson screen designed specifically for the Aqara WSDCGQ11LM square temperature & humidity sensor. The sensor installs into the Lower Part using a snap-in cradle with a latch (no screws or glue) and can be…
Bracket for hanging the Aqara shock sensor on the door handle. This allows the alarm system to be extended to indicate that someone has grabbed the handle or that the door has been opened. The model is made in Fusion 360 and is…
MyQ decided to change their API to block people from controlling their garage and gate openers with any 3rd party apps. This broke my ability to open my gate through HomeKit or anything other than the MyQ app which tends to not work very…
Rails for Under Desk Storage Bins / Boxes. Left, right and center rails. Compatible with CURVER INFINITY 11L and 17L boxes (without lids) Box dimensions: L35,6 x B26,6mm Remixed from IKEA Trofast rail system. LONGSIDE and NO LONGSIDE…
Habe eine Trennwand für die 11L Samla Box von Ikea benötigt. Habe ausserdem einen einseitigen Fuss dazugefügt, somit fällt die Trennwand nicht so einfach um. kein Support nötig.
Inspired by the BitRat designed by yashmulgaonkar, I've modelled my own bit holder that helps carry the: Wera 4-in-1 hex key (Wera 9506) 711L mini ratchet Wera 50mm Bit Holder (shortened) 8x Hex Bits (All links are non-affiliated) Printed…
Einfacher Wandhalter für den Aqara WXKG11LM Zigbee Mini Wireless Switch Ich habe hier eine einfachen, schnell zu druckenden Halter für einen Aqara WXKG11LM Zigbee Mini Wireless Switch entworfen. Er wird mit zwei Senkkopfschraube an der…
This magnetic storage tray is designed for Dungeons & Dragons (D&D) and other tabletop games, offering a Gridfinity-compatible organization system inside an IKEA Samla 11L box. Perfect for storing and organizing miniatures, dice, tokens,…
Two versions, both based on Canilupus original version that both share that I made the original model taller then cut the hinges to give the print-in-place hinges more clearance as the original model almost didn't break free for me. Both…
Experimental knob add-on for the 711L mini ratchet to test my suggestion for enhancement
If you own a Titanium MIG 170 and your 11lb spool adapter is missing or broken, you already know Harbor Freight doesn't sell replacements. Designed from scratch after opening a used machine that came without the adapter. Every dimension…
služi na pevnejšie uchytenie pumpy n kanister
This is a bit replacement that goes into the Leatherman bit holder to hold the a 7/11L ratchet in the kit. No need for a brim but you do need to remove the print in place supports. I run an etsy shop which you can buy this item from if…
About Clips to keep lid closed for drybox from PANTRY storage box 11L (EAN 8694064003828). Box has dimensions for 2 standard 7cm filament spools. Unfortunately the top edge is flat and it does not give edge to grasp the clip, so I had to…
A pocket friendly minimalistick holder for 711L Mini Ratchet Wrench and two Bit Driver Extension / T-Handle. Couldn't decide on the layout so created different size versions and done a version witch carry's extra bits :)
This remix of the original Never Lost SAMLA Clip was designed for users who turn SAMLA containers into dry boxes for 3D printing. The main modification is the addition of a dedicated slot to insert a PTFE tube, allowing filament to exit…
This printable bracket is a simple, sturdy solution for managing the power cord on the Makita VC3011L construction vacuum. The original elastic/rubber strap tends to wear out over time — especially when it’s repeatedly overstretched or…
This is a holder to add space for the 711L 4mm ratchet and a short 4mm extension to any Wera Tool-Check. It's most useful with the Modular Micro 1. The ratchet comes in 2 versions, this is for the knurled version. I don't know if the…
Inspired by the BitRat designed by yashmulgaonkar, I've modelled my own bit holder that helps carry the: Wera 4-in-1 hex key (Wera 9506) 711L mini ratchet Wera 50mm Bit Holder (shortened) 8x Hex Bits (All links are non-affiliated) Printed…
Intro A compact, modular Stevenson screen designed specifically for the Aqara WSDCGQ11LM square temperature & humidity sensor. The sensor installs into the Lower Part using a snap-in cradle with a latch (no screws or glue) and can be…
Suspended tray compatible with IKEA Samla 11L container. It leaves extra storage space ~30mm high under. It is gridfinity compatible but requires boxes to use 21x21mm half grid to better utilise internal space. STEP files for easy editing…
Soporte original para Pionner RT1011L, diseñado desde 0 Para mayor resistencia imprimir en PETG, 3 perímetros, 25% relleno
A divider for the SAMLA 11L Box. Becaus of printbed restrictions it is divided in two parts. The divider is for the long side of the rectangfular box. I use superglue to join the two parts. To fixate it in the SAMLA i use hotglue.
ikea samla 11l(39x28x14cm) box top insert hit the print size limits of the Prusa MK3S glued and used screws on hot to join parts
Pocket organizer for Leatherman bit holder, bit extension, and 711L mini ratchet.
I bought an 11L water tank for my camper and a small water pump on AliExpress. It turned out they didn't fit, so I made an adapI bought an 11L water tank for my camper and a small water pump on AliExpress. It turned out they didn't fit,…
Upgrade your Leatherman or 711L inline ratchet with this compact ergonomic handle . Designed for flat ratchet inserts, this lightweight yet sturdy handle improves grip, control, and comfort during use — perfect for everyday carry and…
Simple and compact handle for the new 711L Inline ratchet driver FL for when I can't use my Leatherman Arc. Friction fit but tolerance is good enough to hold it well with enough surface area for it without it falling off even when shaken.…
I needed to include the mating features of this sensor into a project and could not find a STEP file, so I recreated this model based on the original STL files by Alvomane. From the original description: Since the adhesive version of the…
Key elements of my EDC are the Workpro 4" mini-pliers, 711L mini-ratchet, and the Steinwhale bits and extender. I wanted to hold them relatively compact and flat. These jigs seems to do the trick. The Workpro and 711L tool bodies are held…
This prints just fine for me vertically with no supports. Printed using Overture PLA.
I couldn't find a model for this so had a go at creating one myself and thought I'd share for anyone else to use. This is a fairly simple slide-in holder for the Xiaomi/Aqara Button to attach to the Honeycomb Storage Wall. I have the…
Print in a material safe for outdoors, I used PETG, but any spacing and use an infill over 15% and you should be good.
There is not so much to say. A holder for the Samla 11l box. I printed it in PETG, I hope it will last a while. Once wit
This is a model of Canon NB-11L battery, 3 variants included; Dummy Open Closed Dummy is just a dummy modeled after taking measurement of the actual battery itself. The other two model; ‘open’ and ‘closed’ variants are meant for external…
Retaining Clip for Upper Tray spary arm for a General Electric Tri Clean(GSD5511L00WW Perfect fit works well. I printed this in PETG, but may goto Nylon if this one fails. Follow print instructions on your filament for heats. I Printed…
Simple battery cover for my Li-ion camera battery so that I can safely transport the spare. Even has a label inside for the size. Originally posted November 12, 2014
![Halter Aqara WXKG11LM Zigbee Mini Wireless Switch [Holder Aqara WXKG11LM Zigbee Mini Wireless Switch]](https://media.printables.com/media/prints/629250/images/4985925_bc401d80-b674-4262-9913-e8fd66ddd3b7_d60c2b1b-06e9-45fd-b1c2-ca05009e8dc3/img_20231028_141335.jpg)
