Liczymy pasujące modele…
These are replacement parts for LGB switch drive 1201/12010 (electric drive) & 1206/12060 (manual drive). These are the bottom chassis of the drive mechanisms. Other parts can be found here: - Switchdrive custom lid - Cable junction box…
In an effort to de-clutter my workbench, this charging stand and bit organizer was created for a Skil Model SD561201 electric screwdriver. There are two components a Base and a Lid. The tray in the Base is intended to hold weights to add…
I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation. When I bought the pi5 and the boards there was no matching case and so I designed this one. I…
These are replacement parts for LGB switch drive 1201/12010 (electric drive) & 1206/12060 (manual drive). These are the lids of the drive mechanisms. Other parts can be found here: - Switchdrive bottom chassis - Cable junction box I…
should print fine with any layer thickness (i've used 0.4 & 0.32mm). width 50mm length 130mm height 30mm 29March'22: model slightly updated from 50.5 to 50mm width as some of my bins seem narrower than others. Also added a new model with…
Hi :) This is my first design and upload :) Needed something to hold my small screwdriver and CA glue for my gridfinity setup. It aint pretty , or perfect, but I designed it to practice and I am happy with. :) The skil driver fits tight…
Skil SD561201 Rechargable Screwdriver charging stand with 48 slots
This model was created with measurements taken from a used sleeve. I have accounted for this wear and not modeled it, so this should be as for a brand new sleeve. All measurements are accurate to within 0.05mm, and the critical ones are…
I took measurements of the fridge door features that interface with the bracket and tried to reduce the design to its simplest parts. The result is a design that I feel is both simple and appropriate for FDM printing. Brackets were…
Additional notes: The brackets can be attached to the wall using double sided tape. Both brackets include an Ethernet cable guide on the back.
A stand for the N1201SA vector impedance analyzer.
Adapter to fit snow tracks of the WPL C14 C24 C24-1 B14 B24 to the LDRC Unimogs (P06 and LD-1201). A little longer center screw is needed. I recomend to open the tracks mechanic inside (2 srews) and grease it to lower resistance. As the…
This is a 1-piece replacement for the original Fisher And Paykel button support used in models DW60OUC2X, DW60OUC6X, DW60OUC6B.DW60OUC2X, DW60OUC6X, DW60OUC6B. Click here for instructions on how to replace it .
downloaded the original model but it did not have the gridfinity base, i remixed and added the 2x2 gridfinity base.
Another small sensor enclosure. Can be used with LoRa, LoRaWAN, Meshtastic or other LoRa networks. Supports a small battery up to 500mA (30 x 35 x 4 mm). Easy wall mount USB access for recharging Required parts: RAK19003 WisBlock Mini…
Threaded inserts: M3x5x4
So, VEVOR is making a pretty nice, affordable, and quiet watch winders, right? Well, somewhere they have to save some money. For the watch winder lighting, they are using a simple short piece of LED strip, which is not diffused in any…
Attachment for the coffee grounds container, not the coffee grounds container itself. Part Number: 12011727 Used by: Bosch CTES33W, Siemens CT636LES1, Neff N 90
So, VEVOR is making a pretty nice, affordable, and quiet watch winders, right? Well, somewhere they have to save some money. For the watch winder lighting, they are using a simple short piece of LED strip, which is not diffused in any…
Something to hold my General No.1201 Metal Ruler nearby when not in use. Small lip to aid with positioning during storage of ruler. Attach with Command Strips or two screws 100mm o/c. 10mm x 3mm magnets.
I was missing one of these and decided to design one. Sadly I am a complete noob with fusion, so I couldn't make a chamfer on the threaded hole. If you have a chamfering tool you can just cut it after print. Print with 100% infill and…
Print using ABS or PETG.
Lockheeds giant concept plane that would carry 28 f4 phantom planes under the wings Powered by a nuclear reactor that allowed it to fly for 44 days straight
Attachment for the coffee grounds container, not the coffee grounds container itself. Part Number: 12011727 Used by: Bosch CTES33W, Siemens CT636LES1, Neff N 90
Something to hold my General No.1201 Metal Ruler nearby when not in use. Small lip to aid with positioning during storage of ruler. Attach with Command Strips or two screws 100mm o/c. 10mm x 3mm magnets.
This hook unlocks the saw table to set the cutting depth in table saw mode. It is attached to the cutting guard (Europe only) with two screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't…
Fits for the lever to tighten the saw table Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Prusament PLA PETG Black Category: Machine Tools
Adapter for connecting the Makita LH1201FL with Kärcher Category: Tools
I love my Ridgid tools - more than two dozen. I've been waiting for the weed eater, now I have no electric nor gas powered tools. No more gas cans, no more disturbing noise. And you can't beat the Lifetime Warranty - even on batteries!…
