Liczymy pasujące modele…
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* This opening is another source of hot air leakage -…
A highly detailed collectible statue featuring a voluptuous female sci-fi soldier. The confident trooper stands in a striking pose, armed with an assault rifle and wearing tactical gear, including a combat helmet, spiked armor pads, and a…
This model is compatible with the lego system.
I built this to use on my French cleat wall. There was not a magnetic organizer that exactly fit my Tekton socket set, so I made one. I combined it with some ½" plywood, some bar and cup magnets from Amazon and made a wall mounted socket…
I built this to use on my French cleat wall. There was not a magnetic organizer that exactly fit my Tekton socket set, so I made one. This corresponds with my socket organizers, linked below:…
A mod for Apple Magic Trackpad 2 (A1535) to make it level with HHKB keyboard.
Schaltlehre für Polo 86c VAG 3153 - 5 Gang Getriebe VAG 3234 - 4 Gang Getriebe gedruckt mit Support ---------------------------------------------------- Gear Adjustment Tool for Polo 86c/ MK2 VAG 3153 - 5 Gear VAG 3234 - 4 Gear printed…
Developing 8 sheets of 4x5 film at a time. Print with PETCF for best performance. PLA is too crunchy PLA+/PETG/ABS are too soft ABS-CF should also work. Category: Camera
This model is compatible with the lego system.
Since they are constantly getting lost and the children are sad, I have constructed two replacement arrows. They are compatible with the Lego Projectile Launcher (part number 15301) and fit into the rear handle end of a "Simba - Next…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
End caps for 80/20 Inc's 1530 (1.5" x 3.0") t-slot extrusion. Push fit into place when printed with ABS. Three options: with holes for 1/4" flat head screws, solid, and with holes for routing cable in t-slot. Print Settings Rafts: Doesn't…
Project still in development! Geschichte Dieser Wagen wurde 1898 in Köln für die Nordhausen-Wernigeroder-Eisenbahn (NWE) gebaut und erhielt die Nummer 156. Im Gegensatz zum Wagen 154 hatte er kein Postabteil. Heute ist dieser Wagen in…
This is a copy of the original IKEA BRIMNES Plastic Gliding Foot. I redesigned it because I needed different feet heights. If you have a uneven floor like me you can simply print higher or lower feet. I have added also the STEP-File if…
This model is compatible with the lego system.
This model is compatible with the lego system.
From the official website: 1530 is a 1.50” x 3.00” fractional 15 series rectangular T-slot profile with six open T-slots, two on each 3.00” face and one on each 1.50” face. The profile has align-a-grooves to assist in alignment when…
Designed for the Tekton SKT15311 with the ability to lay in shallow height drawers, this is my favorite layout for sockets. The pockets on the far right side of the SAE are for two universal joints, the SHA12101 . One comes with the…
The Polikarpov I-153 Chaika (Russian Чайка , "Seagull") is a late 1930s Soviet sesquiplane (Biplane) fighter. Developed from the I-15 with a retractable undercarriage , the I-153 fought in the Soviet-Japanese combats in Mongolia and was…
This model is compatible with the lego system.
Крепления для AJAZZ AKP153E, AKP153, AKP153R на монитор.
Originally published here: Motorola Edge 20 Pro / S Pro xt2153 case by tato_713 - Thingiverse This case is for the Motorola Edge 20 Pro , for the regular Egde 20 see this case ; and for the Edge 20 Lite see this case . Thanks to Marcus…
I misplaced the blade fastening screw for my Chef's Choice 615 Electric Meat Slicer. I made a replacement part to match based on measurements (I did not have the original part to compare to). So this is not a 100% exact match but it…
Mount an AirTag in the handle of a Pelican 1535. Does not affect functionality and keeps battery accessible. VERY snug fit. Printed on PETG, 15% infill.
The rubber on Pelican case wheels always go bad eventually and my time finally came, so I sat down in Fusion 360 and whipped up this design. Since I no longer had the full original wheels to measure outside diameter from I simply went for…
The space at the back between the wall and the router is set to 20mm. This should be enough space for the cables. If you need more space you can adjust the distance via the variable “Mount: Distance” variable in the FreeCAD project file.…
This organiser fits in a Pelican Case Air but requires printing in two parts. It has holes in the sides that join the two parts using brass set nuts but I also melted the seam together with a soldering iron. Prints without supports but I…
This is a hand measured replica of 15379 I made in around 30 minutes because one of our english teachers approached me asking if I could help his son get a replacement for exactly this part. After searching a few sites for 2 minutes,…
This model is compatible with the lego system.
Simple end caps for 15 Series t-slot extrusion for 1515 and 1530 profiles. Easy to pop in either threaded or unthreaded ends. The pegs do break when you remove them as expected, but they're tight so they dont rattle from vibration on a…
Project still in development! Geschichte Dieser Wagen wurde 1898 in Köln für die Nordhausen-Wernigeroder-Eisenbahn (NWE) gebaut und erhielt die Nummer 156. Im Gegensatz zum Wagen 154 hatte er kein Postabteil. Heute ist dieser Wagen in…
Simple cover for FNIRSI DSO-152 and DSO-153 (they have the same case just different color). Designed so that the charging port and rear kickstand are completely accessible with the cover on. Since it is a somewhat thin model, I used 100%…
Recommend printing in PETG or something slightly more heat resistant than PLA.
Replacement Hooks for the Playmobil pirates (71530) Ships Sails. The Non-foldable is for the Top Part of the Sail. The Foldable is for the Bottom Part of the Sail. The Foldable one is a bit finnicky, but once in place, it should work…
Mount for the AJAZZ AKP153 Streamdeck on an 40×80 mm Sim Rig aluminum profile The rear section is 10 mm thick. Longer screws are needed. Ideally M8×20 mm. Mounting with M8 T-nuts.
I've been building a Seiko Mod, needed to enlarge the centre hole, slipped and ruined a dial. I had seen people using a perforated base, made by the Swiss, and thought ‘that’d solve my problem'… …then I saw they charge £50+ for them, so I…
Lego 3027 3028 3033 3036 3456 41539 92438 91405
Custom business card holder for Pelican 1535. Both the holder and insert. Add custom negative volume text to holder.
The Jobo 1500 series tank system does not officially support processing 4x5 sheet film. This insert fits 2 sheets and requires atleast 3 35mm film spools of vertical space. So you need the 1530 tank module to fit it. It prints in two part…
J'ai modélisé ce support pour accrocher la Chevrolet Nascar LEGO #42153 au mur. Il suffit de visser le support au mur avec 2 vis m4 tête fraisée, puis de poser la voiture sur le support (voir photos). Imprimer en PLA, en 0.20 avec un…
This model is compatible with the lego system.
This model is compatible with the lego system.
A minimalist WC door hanger ( orthodox version ) , inspired by the iconic single-line aesthetic of the 1970s cartoon La Linea . Its clean, playful silhouette and clear toilet symbol make it an excellent fit for homes, hotels, offices,…
This model is compatible with the lego system.
I've included two versions. One with stubs to lock Figures in place and one without. I also included a test to check if your printer settings will allow the platform to fit. To mount it on your ship, just slide it in. you may need to use…
Parametric Letter Dials for Masterlock 1534 Copyright 2024 by Wesley J. Landaker This design can be used to easily create custom dials/tumblers for the Masterlock 1534 combination lock. This can be done with any letters, numbers, or…
Polikarpov I-153 ' Soviet fighter, 1939 Category: Vehicles
I have designed a mounting bracket for an AJAZZ AKP153. This allows you to easily attach the AJAZZ to an aluminium profile. The bracket has been designed so that the AJAZZ is tilted 10° upwards and to the right, making it easier to see…
Critical Space Item badge made from popular NASA sticker. Print the badge and insert separately, then super glue.
AC Exhaust Vent Cap 153mm fits Whynter style check other models for vent
Lego 2420 77844 15397 2639 64799
We use in our Company some LTE-USB Sticks. But the User can easily open the Stick and remove the SIM-Card. An other problem is that the original Cover will get lost over the time. I've designed a Cover that cannot opend by hand but with a…
ARTE&DISIGN GT153 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ochranný kryt výstupu převodovky pro LT 1. generace
Ersatz für einen Milchbehälter Deckel von einem Saeko Milchbehälter. Replacement for a milk container lid from a Saeko milk container. Category: Replacement Parts
Being tested at this moment. Might need slight Z-adjustment. Print as is, it might (or might not depending on printer) need few supports on overhangs.
This cap is designed to prevent the sails of the Playmobil pirate ship from popping off the beam. I printed it 25% larger since it didn’t fit well with my printer. If the sail beam fits into the hole, it should work as expected. If you…
The Cooper Bussmann 15302 Series, including 15302-2-2-4, is now OBSOLETE . Replace with Eaton 15305-2-2-4. Available at Mouser (not sponsored).
Ego 56V AH1530 bumper head, this is NOT the entire bump head, only the part that spins on the bearing and contacts the ground. Update (1/31/2023): Found that the small plastic shaft was weak, so added a 3mm diameter screw and nut to…
This is a reinforced replacement for the factory "Mickey Mouse" coolant flange found on the BMW E92 (N51/N52/N54/N55 engines). The original plastic part is prone to crumbling, leading to rapid coolant loss. This model is designed for…
I made this to clip onto our eaves, in order to install some christmas lights directly under. It uses M5 bolts and has spaces for nuts. Two on the edge in order to tighten against a wall, and one underneath to hang lighting channels from.…
This is a simple design meant to be a tight-fitting channel cover for 1530 extruded aluminum bars. I designed this so I could hide wires to my lights and cameras on my Xtrusion Overland bed rack in the channels themselves, instead of…
Transmission lever for Mercury Marine engine Part Nr.: 42153 i made a 1:1 copie from the original one and a reinforced version for more durability so i hope this never breaks again the 1:1 lever is on the Photos
My own design for an AuthentiKit "Wedge" part that is designed to attach to 1530 (8020) aluminum extrusion instead of the default AuthentiKit mounting arm. Fits into the standard "Dovetail" part. Original AuthentiKit files available here:…
Master Lock makes a “Combo Word Lock” 1534D that is designed for customizable keywords as the unlock code. They provide some basic letters and symbols. This design contains one Fusion360 Project for customization, and one “Konami Lock…
A 3D topographic map just outside of Valdez, Alaska centered on my home. Located at BP61xb | 61.061533 -146.001906.
Printed at 40% infill using polycarbonate wheels at 40% TPU print wheel blocks on side with supports. bump stop gets printed with notch facing up. To assemble, remove whole rear cover. Pins will need to be pressed out to remove old…
Basic model of the generic lift pads you will see for Bendpak and Danmar lifts. May work for others. Designed to made out of a flexible material so it can be flexed over the metal pads to prevent them from falling off. PLEASE use the…
My neighbor asked me to 3D print a repair bushing for the gear shift linkage of his VW T4. This was done as an experiment. You bear full responsibility for using non-original parts in your vehicle. Please exercise caution and proceed at…
Lid with 153 mm diameter, 13 mm outer edge, 10 mm inner edge, 3 mm lid thickness for bowls, glasses and so on.
Wall mount for Huawei router includes bracket for power brick
I made an adapter for a standard 102mm hose (usually used for laundry dyers) to fit on the Toolcraft ZD-153 soldering fume extractor. It's made of two parts to keep the print easy without many supports. Print the snap mount for the…
This is a holder for the Oscilloscope DSO-153. Its made to fit the Skådis pegboard. It can be used while on the board, but the cables are short so its easy to take it down. Needs supports at the cable holder and the pegs on the back. PETG…
used to mount an ernst socket rail to pelican 1535 molle panel
The cheap replacement for A6397401535 i bought from Aliexpress came with a super flimsy washer clip that was supposed to secure one of the rods. It broke easily when inserting the rod. So here is a replacemement to save us from sending…
A sturdy mount for small to medium sized PTZ cameras attaching to a vertical section of 1530 extrusion. Designed to allow for some adjustability on the camera position horizontally for clearance. I use it with a ball head mount because my…
adattatore per la cappa Faber, la converte in un tubo da 100 mm, ha 3 viti per facilitare il montaggio sulla cappa, ha un desigh smussato per un corretto airflow, per le modifiche allego il file fusion
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print with a about 50%. Infill. 2 of them is needed. Stick the stator sping connectors on, lower the stator into place. Use pliers to hold on to the lever and stick the printed tool into where brushes are normally placed. This tool will…
After a while the high efficient floor nozzles (also called free-flow) floor nozzles of the Numatic Henry (HRV-160, HRV-170 and so on) fall off. The wheel itself is pretty fine, but there is a little shim inside which wears down easily. I…
3D model for the Partron DMH1538DKC DUPLEX FILTER
Gridfinity bin to hold the Jakemy JM8153 Screwdriver for the mini bit set.
A rugged, structurally reinforced rear wheel hub replacement designed specifically for the Worx Landroid L-series robotic lawnmowers (including the WR150 and WR153 models). These mowers are engineered for 1/2-acre yards, and this…
A replica of Toyota bushing part number 90386-12022. This is the black bushing that allows the bell crank linkage on top of the E153 transmission to pivot freely and has probably disintegrated after 30 years contributing to sloppy shifts.…
Eine Deckenhalterung für eine IP Überwachungskamera das unter den Fensterrahmen herausragt. Es ist 153mm lang.
3D model for the Partron DMJ1538HPC DUPLEX FILTER
ABS Wheel Speed Sensor 801538 retaining clip I made this semi truck abs sensor retaining clip it also uses a zip tie secure it added 5 holes for water to drain
Eine schlanke Halterung für die LG-Fernbedienung AKB74815321. Sie wird unter dem Schreibtisch, Regal oder TV-Board oder an der Wand montiert, sodass die Fernbedienung immer griffbereit ist. Die Fernbedienung wird eingeschoben und ragt…
This model is compatible with the lego system.
used to mount an ernst socket rail to pelican 1535 molle panel
Polikarpov I-153 ' Soviet fighter, 1939 Category: Vehicles
This model is compatible with the lego system.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
![Mitsubishi / Proton roof clip MB814153 [testing]](https://media.printables.com/media/prints/59b23e21-a081-4f85-9f4f-d0ffef553a20/images/10892017_a0413855-da53-419b-9981-607a1950fb67_b86feaf8-7d12-433f-a974-c01be487d3ff/2025-10-14_17-40-02.jpg)
