Liczymy pasujące modele…
Ich habe eine Reliefartige Postkarte bekommen, diese kann demnach nicht in einen standard Bilderrahmen. Also habe ich einen konstruiert. Die Postkarte ist zwischen den beiden Bauteilen vorgeshen. Da meine eine faltbare ist habe ich etwas…
Wydruk około 2,01 €–2,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Metric ruler with steps of 1 mm. Measures up to 15cm. Best print with a layer height of <= 0.1 mm. Print instructions Best print with a layer height of <= 0.1 mm.
Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…
I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…
Metric ruler with steps of 1 mm. Measures up to 15cm. Best print with a layer height of <= 0.1 mm. Print instructions Best print with a layer height of <= 0.1 mm.
Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…
These are two rulers perpendicular to each other, also known as a square measure! You can use this 90 degree ruler in many ways, such as drawing or measuring something. Everything is labelled with an extra layer, you can add a filament…
I call it the “eco” version because I tried to design a frame (though visually a solid as the first one) that needs significantly less material to print. Having set infill to 5% you need only 56g of PLA. Furthermore I added mat and back…
90° adapter for air conditioners. Hose diameter is 15cm . The bottom is flattened to fit my BambuLab printer and print faster. Have to the original in terms of wind speed only 0.2m/s loss (original 9.6m/s - 90° adapter 9.4m/s). Please…
15 cm ruler, with goniometer for the main angles and circle meter from 1 to 10 mm
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Can be used at the beach as a shovel or other situations that only require a spoonful
Simple flyer stand. It is printed without supports.
F-15C Eagle A large twin-engine air superiority fighter that boasts excellent performance results, which it owes to dependable—rather than state-of-the-art—technology. Designed to be a dominant force in the air, its high-power engine…
Warhammer Citadel Paint Stand Was asked by my brother to create a stand for his Warhammer paints. His Instagram Page - https://www.instagram.com/theforgotten3rd/ 40 Paints can be stored in each stand. Sixteen of which are instantly…
Photo frame. Inside you can fit a 10x15 cm photo. Category: Art
Due to the feedback of the last version of the installation is not stable, this update was made. The backplane and iron bracket of the four screw holes I repeatedly measured, but the print will always have errors, resulting in the…
Expandable photo frame for your memories. You can (but dont need to) add a cheap (0.99€) glass in 10x15cm for best results. Best wishes
Customized version of https://www.thingiverse.com/thing:1381839 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1381839 Instructions Using the following options: machine = Ultimaker 2+ PLA temperature =…
DEUTSCH Ein funktionales 15cm Rohr für das Quadro-System. Wenn der Drucker gut kalibriert ist, passt das schön und gut fest in die Kupplungen. ACHTUNG! WICHTIG! Das selbst gedruckte Teil hat keinen Anspruch auf die gleiche Festigkeit wie…
The CD-15CWW is an older type of caliper. The existing cases can become unusable due to aging and wear, so I designed this case. It is designed to protect the important mechanical parts from external shocks. There is also a storage space…
I found a nice video on YT about a polycarbonate panel with a drilled hole for any 15 cm air exhaust. The missing thing were the parts to connect the hose with the panel. So there they are, modeled from scratch. I used the sliding…
Cable channel for multiple thicker cables (about 28x33mm on the inside), 15cm long with 4cm sliding connectors
10×15 cm Decorative Photo Frame, with a openwork geometric mesh frame and minimalist design. The mesh pattern was designed as a striking visual element, complementing other organizing objects in the same set. The model was developed for…
This is the same as chttrs's variant with the top wall thinned to fit on a 15x15cm build plate. Be careful inserting the phone, or the sides are likely to shear off. This is a problem with the original model as well, so caveat emptor.
A friend of mine is a therapist who works with children. She uses a toy prison in her therapy sessions for putting away bad things or something (don't ask, I don't know). Anyway, the toy prisons she has used got broken very easily (by…
Print with standard settings for a standard appearance, or, with 4 walls and 0 top/bottom to have the back of the cover display the infill pattern.
Stand, tripod, holder for nanlite pavotube 15C 30C
a center marker for woodworking or any other ideas that you can think of! new and improved for precision and accuracy! Print Settings Printer Brand: FlashForge Printer: Adventurer 5M Rafts: No Supports: No Resolution: .20 Infill: 15%…
Photo frame 10x15cm. Divided into three parts that are easy to assign to each other. It can be printed from any material and always flat on the substrate or as you see fit. There are no limits to the imagination, so the frame can be used…
Features A photo frame designed for a 2.5 - 3.0mm thick (Cura default) lithophane, with a hollow frame and holes for 8 LEDs to shine through as a backlight Fits: One 15cm x 10cm (6" x 4") photo Two 10cm x 7.5cm (4" x 3") photos Two 10cm x…
Ein einstellbarer Fuß für Möbel, dieser wird mit 3 Schrauben an dem Möbelstück befestigt und kann dann mit der großen M30 Schraube in der Höhe eingestellt werden. Lässt sich einfach drucken mit PETG oder PLA. Das Innenteil ist 3% kleiner…
what is this? we had an electrical junction box, closed by a lid 15x15cm, fixed by two 4 mm metric screws. this box had glued wallpaper with some structure and been painted white several times over the decades. the lid broke and the…
The parts here make tetrahedra. One tetrahedron is composed of four copies of the tip, and six copies of the bar. If you want to make the full five intersecting tetrahedra, you will need 20 tips, and 30 bars. The parts push together but…
A bit larger wet palette plus holes for a 10mm magnets, since they're the only ones i could find in a store. No logo too
I enlarged the two characters to 15 cm and painted the faces across the entire layer height to get a nice, precise color
Rustic-style picture frame designed for a 15 × 15 cm acrylic sheet (1.85 mm thick). Required components 1× 150 × 150 × 1.85 mm acrylic sheet 1× 3.5 mm threaded insert 1× M2.5 bolt Frame must be printed with supports.
Ideal for measuring board game-related things. If you want to multi-material print, you will need to set the materials manually in your before printing. Attached SCAD has colors set up in the script, so you might be able to automate it…
DANBY Air conditioner AC 7 Inch adapter/reducer to 5.9Inch (15cm) originally drawn for model DPA120B8WDB-6. Short and long Versions (I prefer the short one). Reducer to 5.9Inch (15cm) drawn because 7 inch ducts seem harder to find on…
This release corresponds with this article: https://www.homegrown3d.com/2023/03/20/13ci-and-15ci-tank-cover-butts/ Find links to the editable tinkercad files and made to order prints on the article! Have not flushed out all the 13ci tank…
This is a prototype for a project in which we want to make education related equipment with sustainable rPET. Tell me what you guys think and how I can imporve the design in the comment section.
The front should lay flat on the print bed. For the brackets, use supports — that worked well for me. For 10x15cm Photos You can glue it or mount it with nails. It has 3 brackets with notches (3 mm diameter) to hang it on small nails.
3D printed calipers, no support, 15cm
✨ 3D Illuminated Alphabet: The Ultimate Custom Sign Kit ✨ Bring your words to life with this complete Verdana Bold 3D alphabet! Whether you want to light up your workspace, create a custom nameplate for a nursery, or build eye-catching…
This 15cm x 10cm (6 in x 4 in) photo frame features a built-in stand, no need for additional support. For horizontal pictures.
Got a lot of harddrives to carry around? Maybe because you work in computer service or in a datacenter? Then this frame insert for these cute 15 × 20 cm Euroboxes is here to make your life easier. (Particularly AUER EG21512) This model…
Here is a Mirror Lightbox Remix to fit 15x15cm Mirrors from Tedox
Rotate for better positioning. No supports needed. 10%infill is enough. ------------------------- Rotar para posicionar mejor. No requiere soportes. 10% de relleno es suficiente. Video para referencia:
Stencil for quickly sketching in "polaroid" format (for 10x15cm format) printed in ABS, 0.2mm layer height no supports with raised edge for better alignment with the sketch pad
15cm Ø Air Conditioner Adapter for Rooftop Windows.
This 15cm x 10cm (6 in x 4 in) photo frame features a built-in stand, no need for additional support. For vertical pictures.
Voici un cercle de 15cm permettant la réalisation de projets en macramé. A imprimer en 100% remplissage.
A simple, stackable bookshelf that exactly fits 15cm-tall Bunkobon. Available with and without “Bunkobon (15cm)” written on the side, so you could print a blank one and use it for anything. The external dimensions at its largest points…
Freestanding photo frame for 10x15 cm photos. Printed from PLA on textured bed for better result. Consists of 3 parts.
Added two versions. Both have the same dimensions (14cm x 8cm x 15cm), only the wall thickness is different. Normal 2mm Slim 1mm
That's it, its the same thing but fits a smaller print bed, i.e. my A1 mini
My Gr.5 class wanted to print something that will be useful in a classroom so they decided on a 15cm ruler with a handle to make it easier to pick up.
This tool wall holder fits small combination squares, sized for 100mm (4") and 150mm (6") models. It securely holds your square upright, protecting it from scratches, slipping, or damage. Mounts quickly with two screws for a clean and…
Based on the USB powered lithophane frame , this is a simpler version designed to be hung up in a window or in front of a lamp. Simply thread some string/hooks through the holes on the side and you're done! No glue needed - a 15cm x 10cm…
I printed using 0.2mm, stringing can occur between the millimetre gaps change setting towards your liking. no extra things you need to do. My printer Neptune 4 pro 0.4mm nozzle PRINT WELL WITH DEFAULT SETTINGS CAN BE PRINTED IN HIGH SPEED
Three Rulers with handles. 15cm ruler 25cm Ruler 15cm Ruler with Protractor - (draw lines every five degrees.) The rulers in the render below are a Two Colour Print using 3 filament changes. Start Filament - White First swap at Layer 8 to…
After I made up a frame brace ( https://www.thingiverse.com/thing:2626456 ), I realised that with some small modifications, it could also be used to secure the frame to a (wooden) base when installed between the Y-rail and the XZ frame...…
Storage for the MaAnt D1 / MaAnt D2 Mini Drill/Grinding Pen, fits in a 15x15cm printer. Will only fit the fine tips in this holder, as you can see in the photo, otherwise the model would be too long to print. Prints with no supports.
Ikea's cooker hood solution, with the recirculation mode solution, typically comes with the NYTTIG TUB 150 (150mm diameter pipe). However, a cover for this is not offered. My solution can simply be plugged in and cannot be closed…
Put this picture frame on top of your 10x15cm photograph and have a little window into the world on your wall. 4 different designs The improved version has a different version of the ledge. You can also print little plants and a cat and…
This is my very first design. Here you can find the frame, the letters and two different objects to decor the frame (little human silhouettes and a heart), but feel free to add you own objects. You can also print it in the colors you…
Automated active self-watering orchid system. Orchid is placed in the top half, the bottom is filled up with water. A lid separates the two parts. At set day intervals, the water is pumped up and soaks the orchid for 2 minutes before…
I needed a tray for something and wanted one that was fairly heavy and robust. So I quickly drew and printed this and it's worked well. 150mm x 200mm with a 14mm tall and 2mm thick lip. Base is 2mm thick, with another 2mm of 45° tapered…
Embark on a journey of miniature luxury with this extensive living room furniture set, meticulously designed for 15cm dolls. It's a comprehensive collection that combines everyday essentials with decorative flair, perfect for creating a…
I would love if you liked this so i will could get Prusament 😂 ( please ) Just drag and drop the file to your favorite slicer. Set layer height to 0,2 mm. Hit print and wait untill its printed. 😉 Here is how to do it in PrusaSlicer: Then…
Hello, I have Rick Sanchez from the series Rick and Morty for you. It is suitable as a decoration from the TV series. Suitable for coloring, playing, or for a diorama from the series. My children love painting these characters. It prints…
This vase was designed with a unique dual-texture approach, allowing me to invert the fuzzy settings —applying fuzzy skin either to the base or to the textured areas . The result is a striking contrast between smooth and rough surfaces,…
MGN15H and MGN15C Linear Rail Carriage Holder for cleaning / maintenance. Features a hole at the end to put a zip tie. Useful for chucking into an ultrasonic cleaner, etc.
Cheap Chinese plastic calipers that turns on automatically has a tendency to turn by itself when it is placed in a drawer. For that reason I designed this cap, that fixates the jaws of the caliper in place, so it can't move and hence can…
Print two copies of the model (one for each side) and attach to the PDU with the included brackets and 4-8 M3 machine screws (I used M3x6mm). NOTE you may need quite a bit of space to angle this & fit it into your rack, so make it one of…
Fire eagle like bird known as phoenix (or misspelled pheonix) Made using hueforge To use 5 filaments on 4 color AMS load first 4 filaments and then swap the first filament with the last filament after it is done printing during the print…
Lightbox Numbers 15cm size height / body 4cm thickness Alphabet 0-9 collection . Good for House numbers Body is recommend to print in PETG , while insert use PLA No support needed. Make your own hole for led cable output only (5mm…
My wife wanted a duster attachment to help clean the baseboards. It can still navigate around corners and chairs, and the like, but it might take a second to figure it out. We use the Swiffer Dusters and just cut them in half to slide…
This is an Internal Chassis replacement for the wide "pizza-box" style Apple Macintosh computers from the 90s that included an internal CD-ROM drive. Specifically, this part is for the Centris 610, Centris 660AV, Quadra 610, Quadra 660AV,…
🌌 ¡El gigante acorazado reimaginado en ángulos poderosos! Este diseño minimalista captura la esencia salvaje del rinoceronte mediante planos geométricos audaces y silueta imponente. 💡 IMPACTO VISUAL EN TU ESPACIO: 🏠 Figura 15cm: Pieza…
The bicycle was too big for the birthday table and only a picture to boring, but the small modell fits perfectly there. I designed it with Fusion 360 and printed it in two colors on my Bambu Lab H2D with PLA. No support is needed.
slow eat bowl addon + bowl holder (for ~ 15cm diameter) print 2x holder, clip it (and / or glue it) Category: Pets
Print with standard settings (0.20) and auto-tree supports. Assemble it by first fitting the buttons for volume/unlocking, then slide the phone in with the "camera_addon" over the camera module. Lastly add the top and screw it tight. Let…
It's a box. Customizable with whatever text. You can glue on handles. It also has a lid. Lid has a rectangle meant for tape so you can label it. Designed for the WiFi Lab event in Science Olympiad To customize the box body, import the STL…
Messerscheide für ein Zassenhaus Easycut Küchenmesser mit 15cm Klinge. Am besten auf die offene Seite plazieren und hochkant drucken. Bei Druckplattenhaftung "Brim" auswählen. Knife sheath for a Zassenhaus Easycut kitchen knife with 15cm…
The blackboard fits perfectly into the frame. Thanks to its legs, it can stand in a bed position.
A mount designed to hold a 10x15cm Lead Acid Battery. Designed for use inside a 1:1 R2-D2, but it will work for anywhere you might need to secure a battery like this. There are four M4 countersunk bolt/screw holes to secure it to…
A small case with a Lock, dual axis torque hinges, and inner latches for securing objects. All parts are connected to the case using M3 screws + M3 nuts/M3 inlays. the axis for the hinges and the lock in the example pictures are 4mm…
Fachzeichnen Arbeitsplanung Metall Grundstufe - Passstück HuT015C
Shelf Bracket 15x15cm use 4mm screws Print settings 0,2mm layer 6 walls 30% infill no supports
Part as seen on photos printed with: Anycubic Kobra Plus with PEI upgrade. Printed in PLA (Polymaker Polyterra Peanut). Printed with adaptive layerheight (or 0.2mm recommended). Infill 100%. Don't activate support, I already put “support”…
This is a custom-designed TPU antenna mount for the GEPRC Mark 5 frame. It is specifically tailored for the DJI O4 Lite Air Unit setup combined with a Dual ELRS receiver system. Key Features: Optimized for O4 Lite: Designed for a single…
Son 4 patitas de diseño recto con refuerzos angulares para perfiles aluminio 4020 / 2020 utilizamos en cada pieza para fijarla 4 tornillos métrica M 4 x 12mm + 4 Tuercas de martillo M Slot rosca métrica 4
Make your own sign! With just some creativity, some super glue and some rope, the possibilities are endless! Can be made to be hung or stuck in the ground with garden stakes (files provided) The hole for the rope is 10mm FRONT PLATE IS…
Picture frame for 15x10cm pictures or puzzle. You will need: 8x 3x15mm magnets Feel Free to add a plastic sheet in front of the picture/puzzle for extra protection. I personally used some 0.3mm clear PVC I had lying around.
