Liczymy pasujące modele…
iPhone 16, iPhone 16 Plus, iPhone 16 Pro and iPhone 16 Pro Max cases Print it in TPU for maximum convenience. If printed without top and bottom layer, it will be easier to peel from the print bed. Check my other models for even better…
MODEL: ONLY IPHONE 16 PRO Cover to be used only for Iphone 16e Does not fit all other Iphones Print it with a soft material such as TPU or PETG You can avoid the supports and the brim Clean the plate well Hexagon design allows you to see…
Apple iPhone 16e case to be printed using TPU. I didn't find any so I decided to design my own. Now, I'm sharing it. This case can be customized with your own text or logo to make it unique. This is very easy ro do using your slicer…
the model for the iPhone 16e is not 100% accurate, because apple hasn't released the design schematics for it yet, but going off pictures and the regular iPhone 16 schematics I was able to create a model that was 99% accurate, the only…
iPhone 16e and 17e TPU Case. Use snug support type, that's easy to remove.
Gona make your own holder or case for your new iPhone? Maybe you want to see how it look before order starts? On pictures you can see how it compares with iPhone SE2 (without case) & iPhone 16 Pro (with case). other iphone 16 series…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Birdhouse 16eme. I'd like to dedicate this…
📱 iPhone 16e Case – “AirFrame Minimal” A sleek, lightweight, and uniquely styled case for the iPhone 16e with a skeleton-like frame design. Perfect for users who want to protect the phone’s corners while showcasing the original look of…
housing for a step down converter Link Amazon can be printed in PET (preferred) or PLA includes 2 cavities for zip ties to secure your cables inludes a version with “printhelpers” to improve adhesion to the bed and can be cutted off…
I had accidentally thrown away my Zagg alignment tool, so I modified @rox97 's to fit the Zagg screen protector. To account for the Zagg being quite a bit smaller than this was designed for I added some stand offs on 2 sides to help with…
I found that most 3D printing 19 inch server rack holder designs for Netgear GS316EPP and GS316EP 16 Port Switches were either too large for my heated bed (23.5 x 23.5cm) or had too much unused space . So I decided to make one of my own,…
XLSEMI - XL4016E1 Based Buck Module
I found Andrew's design quite useful as it rigidly fixates the switch, even when (un-)plugging ethernet cables. The present design has openings for better ventilation, since the original design was blocking the vent holes present in my…
Iphone 16E phone model 3mf accurate official dimensions
An iPhone 16e model MMU/Assembly print options Print it with 0.2mm or lower layer height. Everything snug fits. REQUIRES GLUE TO ASSEMBLE
10 inch Rackmount Ears for Cudy 16-Port Gigabit Light Managed Switch GS1016E
A TPU iPhone16e case using Echer's Circle Limit IV (Heaven and Hell)
Replacement for the Bumper of the RC-Car H16E from DEERC Mine broke so I had to design a replacement. While doing it I also stabilized the week-point which is in transition of the actual bumper & chassis of the car by making it thicker &…
My 16 port switch was too wide to fit in the 10" rack but this seemed like a good compromise. I've included the FreeCAD file - it's a mess but hopefully it's easier to tweak that than to start fresh if you want to adapt to your own switch.
With passthrough cable hole exiting to the side. Just mirror the model in your slicer, if you need it to exit on the other side. Fits most cases, no need to take the phone out. 16e version added as well.
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards…
This is a single slot blower fan mount for the LSI Logic 9201-16e SAS HBA. Blower Fan: AVC BASA0715B2U 70x70x15mm (search ebay for these) I spliced a 3-pin fan connector to the fan wiring and adjusted the speed in BIOS Alternate(Not…
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e. If you want to change colors for the holder and/or logos then change at 13 mm. I added built in supports, so DO NOT enable…
I printed it in PETG with a nozzle of 0.6 ;)
I noticed that I have another car with the same chassis that has a battery tray that allows for velcro straps to hold down the battery. With the idea I might want to use batteries that will not fit the original tiedown and the tray from…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
Mount for AZDelivery XL4016E1 DC-DC Step Down Buck Converter to power RPI4 with DSI Display and cam. Mounted inside the original Reborn 2 electronics box. Screwed with t-nuts to the right beam, the AZDelivery XL4016E1 DC-DC Step Down Buck…
Usually, 300 mm calipers have longer jaws than the 150 mm ones, so my Mahr 16EX could not fit the ordinary holders. Print it with slanted side down, no support needed. I printed it with Esun PLA+, 2 walls and 15% grid infill. Caliper…
Be warned, this model is extremely Ehh, Good Enough™. The detail is minimal, measurements were taken with a $22 digital caliper, and I rounded all of the dimensions to the nearest 1/4mm, so a laser scan or micrometer precise model this is…
I wanted to use a custom body I found for another variant of my RC car. I have an H16E deerc which is an mjx hypergo clone. My car did not have the same mount points that the custom body needed so I modified this front shock tower to…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
Simplified model of: https://www.printables.com/model/1513148-tp-link-tl-sg116e-wall-mount-brackets
I was given a DEWALT 716E mitre saw, but the holes to fix it on its support were too big so I modeled spacers.
If you have an extended battery latch for using 3S batteries, the knob to lock the latch is a bit hard to reach. I made this knob fit the original knob and not get in the way of locking and unlocking the latch. You can super glue it in…
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e. If you want to change colors for the words and logos then change at 13 mm. The letters in "Space" are 1 mm taller than all the…
Intended to be printed upside down as shown. Supports recommended. PLA or PETG recommended as you need to stretch it a bit to install. No special print settings needed. Requires 4x M3 screws and 4x M3 nuts. Screws need to be the thickness…
I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards available. If you want to change colors for the holder and/or logos then change:…
I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards available. If you want to change colors for the holder and/or logos then change:…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards available. *****I think I'm going to update this soon and move the Boeing logo…
I needed a suitable enclosure for my step-down module to power my LEDs. I found a file created by @MartinL_2160 and modified it to suit my requirements, as his module differed from the one I am using. It is installed in my VzBot330 to…
I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards available. If you want to change colors for the holder and/or logos then change:…
iPhone 16e and 17e TPU Case. Use snug support type, that's easy to remove.
I found Andrew's design quite useful as it rigidly fixates the switch, even when (un-)plugging ethernet cables. The present design has openings for better ventilation, since the original design was blocking the vent holes present in my…
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards…
Simplified model of: https://www.printables.com/model/1513148-tp-link-tl-sg116e-wall-mount-brackets
Only some slight modifications made. I raised the height about 10mm and remade the appropriate cutouts for terminals. Also had to recessed the cutout to lay board. Only modified the bottom plate..
