Liczymy pasujące modele…
New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Spacer for both sides of the 32140 batteries. Has cut-off for jumpers between elements. I set diameter to 32,5mm, so you may scale it for tighter holding. Added v2 with dovetail joint.
I wanted to hang my McLaren F1 horizontally, but I couldn't find a bracket for it. So I made one! Fusion 360 files included, feel free to modify. The screw holes might be a bit small, but I had no problem with 4mm screws. Gcode file is…
I was not happy with the wheel disc design on the Lego McLaren F1 Car released in 2022 (Kit 42141). Designed these as a replacement. The model you see printed in the pictures was done using a variable layer height of 0.2 at the base all…
Skadis wall mount to fit the Mercedes F1 (42171) and the McLaren F1 (42141) Lego Models. Wall mount is printed in multiple parts to reduce the amount of supports needed, I would recommend tree supports for the main backing plate.
Remixed so there is no gluing involved. Print and push onto the axel rod.
DS-2CD2146 (diameter 121.4 mm) https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/ds-2cd2146g2-i-su-/?q=ds-2cd2146g2-i&pageNum=1&position=1&hiksearch=true Other material: Camera mounting screws 3pcs…
Originally published here: Motorola Edge 20 xt2143 case by tato_713 - Thingiverse This case is for the regular Edge 20 model, for the Edge 20 Lite/Fusion see this . Thanks to KonstiSFX who helped me testing this case. Some of the models…
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
This model is compatible with the lego system.
This custom 4-part adapter set allows you to use affordable Moskvich "LUXE" LX-2141-B filters with your Karcher WD3 vacuum! Designed for easy 3D printing and assembly, it eliminates the need for expensive OEM replacements. No supports…
Kids broke the bucket where the forks attach so I created this one in CAD to reinforce the connection. I've placed cut-outs on the front of the interface so that it is easier to attach and remove. I've also angled the tabs on the back for…
Coaxial Cable Stripper - RG214 / N-Type Tool for stripping RG214 coaxial cable for Jyebao N3100A N-type crimp connector. Fits several other N-type connectors as well. For use with standard utility blade (Stanley, DeWalt etc) and two 30mm…
LEGO Technic Weighted Counterweight – Part 80428 (Liebherr LR 13000 - #42146) The original LEGO Technic counterweight for the Liebherr Crawler Crane LR 13000 - #42146 relies on stacking identical solid elements. While visually accurate,…
Un montaje rápido, sencillo y fácil para el monoplaza de Fórmula 1 Technic McLaren de lego 42141 en posición horizontal. Se utilizan tres tornillos para paneles de yeso para colgarlo en la pared. Configuración de impresión 3D Altura de…
Malkov RK-11 SMG from BF 2142 Designed in fusion 360. It features a functional mag slot. It should be around full scale. at around 500mm long Its not the most detailed model but its the best I could do with what I had available. Not for…
Involute Interlocking puzzle by Stewart Coffin (STC #214) Assemble the eight pieces into a 4x4x4 cube. Involute is the third and final entry in Stewart Coffin's classic trilogy of interlocking cube puzzles. It is a refinement of his…
A recreation of the air vent for John Deere 2140. In image the original is to the left and my design is to the right. Print these parts in whatever plastic you have that is more accepting of heat. All parts can be printed easy with only…
This model is compatible with the lego system.
I created a minimalist case for the XH-M214 watering module that is easy to print. The holes for the buttons was intentionally left small, so it can't be pushed accidentally. You can use a toothpick, or something with similar dimensions…
This model is compatible with the lego system.
Printable 3D model. Heracross container. Pokemon inspiration. STL files.
Wall mounted hanger for LEGO formula model
Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…
Рамка кулисы кпп москвич 2141
Taking inspiration from the engineering consoles from the STARFIELD game I've created a case to house an Elecrow 7" touchscreen, with rear mounts for a Raspberry Pi4. The consoles designed to be mounted on STARFIELD inspired brackets that…
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Material choice is pretty much irrelevant. Needs double sided adhesive to be attached. I recommend playing around with different bottom infill patterns for aesthetic purposes.
This model was made for an educational platform of industrial networks. The controller used was a Siemens model 1214 DC/DC/DC PLC . The adapters are screwable banana jack to banana plug to plug cable. The cable used for connections from…
Втулка рычага сцепления москвич 2141
Втулка педального узла москвич 2141
Taking inspiration from the engineering consoles from the STARFIELD game I've created a case to house a Jun-Saxifragelec 7" touchscreen, with rear mounts for a Raspberry Pi4. I created this model because I already had the touchscreen. If…
ARTE&DISIGN GT214 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Для салонного фильтра Daewoo Nexia. Категория: Транспортные средства
PETG Category: Vehicles
Based on RobNee_76719 's excellent idea and design , modified to fit the 120W charger. Original explanation below: Anker USB C adapters have USB C ports that don't always grip the cables tightly. Cables are prone to slipping out when…
Mounting brackets inspired by the STARFIELD computer game, designed to mount computer consoles on 1515 aluminium rails. These models are to accompany my STARFIELD computer touchscreen console designs listed below. STARFIELD Inspired…
I lost the original kickstand for my Craftsman Model 82140 Multimeter. This model holds the multimeter at an angle where the LCD display can be easily read when in use. When not in use, the kickstand folds into the original molded pocket…
petg Category: Vehicles
Used material: Prusament PETG, extruder: 240°C, pad: 85°C, infill: 15%
Втулка подголовника москвич 2141
Поперечина крепления панели 2141
Taking inspiration from the engineering consoles from the STARFIELD game I've created a case to house an ALLWIN MH400 4-channel audio mixer . The consoles designed to be mounted on STARFIELD inspired brackets that attach to 1515 aluminium…
I didn't find a good and tight mounting system for US standard peg board so I made one. Description: This would fit US standard peg boards with ¼ to 9/32 inch hole and 1 inch hole spacing from center of hole. The bracket has some…
This is a replacement locking bolt for Dell Latitude 7214 Rugged Extreme laptop hard handle. I bought an OEM handle on eBay, but didn't come with locking bolt bolt, so this is a quick replacement for the bolt while I design a better one.…
Sunvisor holder for Moskvich 2140 Replaces the old holder, which could be cracked/desintegrated For the best fit it's better to heat the inside, to have a snug and reliable fit Тримач козирька на Москвич 2140
If you have a mobile raised bed from Costco (Cedarcraft model CC_SW2147A) with the bug screen option (CCGC-21-B) then these clips will hold the screen down against the side of the bed to keep birds and small animals out. I printed with…
Sliced and diced the bottom and lid in 3D Builder to fit the Radio Shack 22-204 & 22-214 meters. Removed FLUKE logo. Used 4-40x1-¼ inch screws, Cases are PETG and latches are PLA.
Skadis-compatible mount designed specifically for the Mercedes F1 (42171) and McLaren F1 (42141) brick set The mount is printed in multiple sections to minimize the need for supports. For the main backing plate, tree supports are highly…
Interior clip for 900 94-98 9-3 98-02 part no. 4421475
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Die standardmäßig im Mercedes E-Klasse (W214/S214) in der Mittelkonsole verbauten Cupholder brauche ich nicht. Stattdessen hätte ich gerne ein flaches Ablagefach. Zunächst wird der Cupholder ausgebaut - das ist sehr einfach auch in der…
Case for the Wondom 500W Boost Converter
When repairing the Parsun F2.6 outboard carburetor, I noticed a missing cap. Without it, the engine would flood after a short time. The original cap is probably rubber, but I replaced it with one I 3D-printed in TPU (I used Creality…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Key Features: Fits standard US plates. Intended for use…
Install it in place with original clips and then rotate 90* and screw original Grohe holder.
Ein einfacher Schaltknauf mit den Gangangaben oben auf dem Knauf für den IHC D 214 Standart Traktor, Bei bedarf kann eine M10 Hülse eingesetzt werden. Mal was anderes als der Original Pilz Schaltknauf.
remax fm http://www.thingiverse.com/thing:106281 not test yet. Category: 3D Printer Accessories
Every house has that one corner the gets the ---- kicked out of it. Now you can make it a solid part with nice round corners. Included are files for a square edge wall, walls with 3/4 inch rounded edges, and 3/4 inch and 5/8 inch round…
English : This is a fix for the defective part of the lid of a door shelf in a Bosch/Siemens refrigerator with the E-number KGE39EI41/94. The current Bosch part number for the door shelf is 11013214 (old part number: 00745358). The door…
I recently acquired a Craftsman 124.21400 (rebadged early gen Rikon 10-305) that had a broken bushing for the front door knob. I had the original parts, so I modeled up a replacement and swapped it out. So far it's working perfectly!
A quick fan shroud IU made for the Asrock D2143D8UM / Datto S4P2143. There are 2 models included. One is for an 80mm fan, the other is for a 60mm fan. The body of both shrouds is the same, it's just the fan mounting that is different.…
ARTE&DISIGN GT214 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Ein einfacher Schaltknauf mit den Gangangaben oben auf dem Knauf für den IHC D 214 Standart Traktor, Bei bedarf kann eine M10 Hülse eingesetzt werden. Mal was anderes als der Original Pilz Schaltknauf.
This model is compatible with the lego system.
A model of the famous Airbus A320-214 If don't want use many supports, download the Left and Right files. Still use supports on the engines though. I deigned this on Onshape.
This model is compatible with the lego system.
Printed in PLA w 0.4mm nozzle. The version I uploaded is slightly larger than the one shown in the photo, and thus i did a slight angled trim at the corners to make it fit within a 220x220mm print bed. Orca removed the negative cylinders…
un personaje favorito de muchos recomiendo imprimir con boquilla 0.2, con borde exterior para su adherencia.
I recommend printing this out of TPU and using the support enforcer included in the 3MF. 100% infill recommended
Apple hat die Größe des MagSafe Charger mit 25W gegenüber dem Vorgängermodell mit 15W leicht verändert. Um die bereits vorhandenen Halterungen weiterzuverwenden, habe ich diesen Adapter erstellt.
Desk stand that helps me find the charging cable for my Nokia BH-214. Before I had this, I had to hunt for the cable and plug it into the headset. Now I can put the headset onto the stand with just one hand. Instructions Sliced with…
Une plaque siphon sur mesure en remplacement d'un siphon en fonte. L'eau s'écoule par les trous extérieurs. Vous pouvez customiser votre texte à votre guise. Print Settings Printer: LK4 Pro Rafts: No Supports: No Resolution: 0.28 Infill:…
Collection of Gridfinity basic cups height 30 (214mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per…
DD-214 Stop Sign. Display it in your office, home, etc to get people out of your hair. Leave me a picture of it.
A holder for the Tradfri light switch that can be placed on the Busch Jäger light switch. The bracket can be used with normal, series and double light switches. Inside the cover is a 10x5mm neodym magnet. For series light switches use the…
Standardizing tool organization in my shop with Skadis pegboards from Ikea, and needed a mount for Grandstream GXP2130/GXP2140 phones. Printing with Skadis pegs against the build plate and Cura tree supports created an awful cleanup…
This is a folded horn enclosure designed around the Tangband W5-2143 bamboo driver. This driver is $100 and this enclosure will get everything out of it you could want. Just clue on the side and bolt in the driver. I used screws to attach…
A simple holder for a Knipex 2502140 plier. Made for the Ikea Skadis wallmount. Uses the excellent T-nut system.
This camera enclosure is for a Sony IMX214 camera sensor board with a USB connector. I purchased the camera from a retail store that deals in Amazon returns and merchandiser liquidations. This can be purchased from ELPCCTV here - though…
ORGANIZZATORE GT214 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
This is a copy of original detail, but all of cars haven't this. Category: Vehicles
Batterierahmen / Battery frame Husqvarna Rider R214TC
Rahmenschutz Motorhaube / Frame protection engine hood Husqvarna Rider R214TC
Tülle Öltank / Grommet oil tank Hydrostat Husqvarna Rider R214TC
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Foot/base for Alberts 432140 angle profile (35x35x1,5mm), (available on Amazon, at least in Europe). Can be used to build a table, bench or shelf if you don't want the profile to be standing directly on the floor. (example in the photos.)…
![Display Stand for LEGO Technic 42145 Airbus H175 Rescue Helicopter [last update 16.07.2024]](https://media.printables.com/media/prints/942932/images/7220058_0b5215b9-6190-4e2e-98be-d6866d30c484_a8c55af5-4150-4612-a534-366255a071e5/42145-2.jpg)
