Liczymy pasujące modele…
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
I like this model because it really grabs the M2 card. Other models i saw only have a small corner holding the card. I was afraid the drive could then fall out. But the model was only for 2242 so with the supplied Fusion model and my…
A set of M.2 form factor SSDs with both M and B key combinations. Also, S1 (1.2mm component height), S2 (1.35 component height) and S3 (1.5 component height + M and B-key versions are available. All other dimensions (including keep out…
Acquired a new Husky 2 Door Cabinet and one of the shelf brackets was missing. Customer service said the manufacturer doesn't have any, and doesn't know when they will, so i designed my own. Works much better than I thought it would, as…
it's a tight fit but it should work. flexible adator for 2230 or 2260 cards. you should print it in ABS or in PETG under the cpu could get warm.
Vevor Mini Lathe DRO mounting kit (YS-2260A). The "Apron.STL" that I used for modelling the parts is from https://www.thingiverse.com/tonycstech On a small lathe it is very hard to find an acceptable mounting spot for the x-axis scale. I…
Parametric Dial Indicator Holder for Vevor Lathe (YS-2260A) Required printed parts: DialIndicatorHolderBottom_square_nuts.stl (1x) or DialIndicatorHolderBottom_hex_nuts.stl (1x) DialIndicatorHolderTop_square_nuts.stl (1x) or…
GM / Chevrolet 1992-2020 Multi-Purpose Retainer (Part number: #22600404) for cargo / convenience nets, etc. I created this model to replace a missing cargo net hook for a Chevrolet C7 Corvette. Given the GM part number, it should be…
Very simple bracket to allow m.2 2280 drives to fit on the Datto ALTO 3 V2 board, which is designed to only hold 2260 m.2 drives.
Simple adaptor, which comes in handy if your computer does not have a mounting screw for NVMe M2 2230. It works with 2260 or 2242 mounting hole. Print Settings Printer Brand: Prusa Printer: MINI+ Supports: Doesn't Matter Resolution: must…
A printable 3d model for SSD M2 Rack
For the no longer produced Mitutoyo 522-602 Parallax caliper, designed this as I have a very cramped working desk and the plastic pouch included with the caliper was not so good to store it. Big, Long and sturdy this case does the job The…
When I was replacing the window cowl, I found my BMW e46 Touring is missing one of the wiper arm nut cap (part no 8226006). Similar parts sold online would be at least GBP1~2, but we are Makers and I also would like to practice my CAD…
Works with 3-yaw chuck that comes originally with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to appreciate my efforts just buy…
[EN] In-Line signal line status indicator for sensors with M8 connectors in 3-pin and 4-pin versions. These indicators make it easy to adjust sensors in locations where the design of the equipment makes it impossible to use an indicator…
Magnetický držáky pro kryt lože šířky 160mm, použity magnety 10x5mm
Some basic covers for lathe bed rails to protect them from chips. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to…
There is a space between a collar and the body of the gearbox. This spacer fills the gap and helps to keep the collar parallel to the gearbox. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work…
Gearbox of YS-2260A need zero-maintenance to work correctly. This washer helps to keep the knob parallel to the face of the gearbox and make operations more smooth. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my…
Two spacers are needed. Install them between the safety cover and its shaft, from both sides. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free…
If you like this model please like and download, it helps motivate me to make more! Please consider using the amazon affiliate link bellow for the required hardware! The spacers Raises the Datto Alto V3 up 14mm to increase airflow or make…
A holder for popular 5W work lamp, which you can find on popular Chinese portals under "5w working led light flexible magnetic stand". Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into…
Exposed NVMe Frame V2 // Full Hex-Flow Edition (JMS583 + 2260) This is a V2 Remix of the Exposed NVMe Frame . What’s New in V2? Dual-Sided Ventilation: I have added a matching hexagonal mesh pattern to the bottom floor of the frame.…
Exposed NVMe Frame // JMS583 + 2260 Edition A high-performance, minimalist enclosure designed for the JMS583 bridge controller and M.2 2260 SSDs . This design ditches the bulky "black box" look for a sleek, PCB-hugging frame that…
Works with 3-yaw chuck that comes originally with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to appreciate my efforts just buy…
Exposed NVMe Frame // JMS583 + 2260 Edition A high-performance, minimalist enclosure designed for the JMS583 bridge controller and M.2 2260 SSDs . This design ditches the bulky "black box" look for a sleek, PCB-hugging frame that…
Bracket to allow installation of M.2 2280 SSD in the M.2 2260 slot on SuperMicro X11SSH-TF/CTF motherboard. Requires two M3 heat-set inserts. Install bracket on motherboard in the 2260 retiontion screw hole. Other end provides proper…
