Liczymy pasujące modele…
A 25kg/45lbs cast iron plate scaled down to make it more portable. Diameter: 45mm Thickness: 3.75mm Weight tolerance: +/-3% For training use.
0.20mm layer PLA Really quick print. Endurance 25kg
This is my attempt at replicating a 1/5 scale model of a Titex Calibrated Weight Plate set. Everything can be printed, however I found that the plates were too heavy for a printed barbell. Use a 6mm x 300mm aluminum rod in place of the…
A two piece adapter for small 0.25kg filament spools. It slides in the center of the filament spool and makes it fit the AMS like a full sized spool of filament. It takes ~1:15 minutes to print on my Bambu lab P1s with standard settings.…
This is a mount and housing for DS3225MG servo. Control wires come out the bottom opening. Some supports are needed, and you’ll need to tell your slicer to pause at the top of the embedded M3 nuts so you can insert them. (See photo) I…
Here's a servo arm for a 25kg servo on the FTX Ravine! hope it helps bare in mind the server is on the front of the ravine and has also been flipped so the servo arm is shorter, the servo arm stands off the steering arm quite bit to allow…
A wall mounted plate hanger for small metal plates for use on a 50mm Olympic bar. size 0.5kg 1.25kg and 2.5kg. Has a small lip to prevent them slipping off if knocked. No supports needed.
A two piece adapter for small 0.25kg filament spools. It slides in the center of the filament spool and makes it fit the AMS like a full sized spool of filament. It takes ~1:15 minutes to print on my Bambu lab P1s with standard settings.…
