Liczymy pasujące modele…
I wanted to have an "impossible passthrough" style model that is small so I can print one for everyone in a group, as a surprise present is sturdy works well has maximum possible detail for the size both parts should seem like a full size…
A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…
This is a cable clip for a 4080 simrig to hold the larger cable sleeve. It clips onto the rig and stays put. Very small and fast to print so you can print several to help you guide the cable sleeve around your rig.
Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters.
Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters. Tyres…
A simple tool to diffuse water, preventing soil or coco coir from being eroded. designed with onshape
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
This is a decorative, bowl-shaped planter featuring a clean lined texture that wraps around the exterior. The rounded profile softens the look of any shelf or desk, while the linear pattern adds depth and shadow. With a wide 12cm opening…
To scratch the back of the covers before placing the cardboard. Guides, rulers. Print Settings Printer: Sethi Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: Any PLA Any Notes: 30cm x 30cm table Category: DIY
Clothes dryer fix for 2,5mm rod and 1,2cm base stand.
A rail system to quickly bolster a 2.2mm-thick height-adjustable desk with a lot of fun objects to declutter and organize its space! Rail-based system.
Top cover for the Snapmaker U1 3D printer. A 60L container (59cm x 42cm x 36cm) is used. Printed with a layer height of 0.2 and a line width of 0.65 , infill density of 10% with a Gyroid infill pattern. Total weight is approximately 320g…
Questo semplice oggetto mi ha permesso di fissare i 4 angoli della scatola che ho creato per proteggere la mia stampante dalla polvere. un piccolo oggetto ma a mio parere molto utile e con molte utilità, si può scalare e rendere di ogni…
Angolo, giunto raccordo per zoccoli spessore 1,2cm e H12cm
This is a cable clip for a 4080 simrig to hold the larger cable sleeve. It clips onto the rig and stays put. Very small and fast to print so you can print several to help you guide the cable sleeve around your rig.
A simple, modern picture frame stand, with a low profile so that it is hardly noticeable. Fits 2cm thick picture frames and works for portrait or landscape orientation. Can also be used to stand up signs and other artwork. Can be printed…
Note : I haven't printed it yet myself, will update it by the end of April 24 Double-check the plexiglass dimensions before ordering, since I haven't verified it yet. Print instructions: Stop print to insert hinges on the Bottom Corners.…
simple hook for holding your controllers at your desk wile still allowing charging. no screws & no glues! ------------------------------------------- confirmed compatibility, ps4 controller ps3 controller switch pro controller switch…
This is a remix of the only speaker mounts I liked for these. I remixed them to sit on the back of my samsung tv.
Make of bean holder for Philips printables does not allow non-commercial license org model thing:5401987
Replacement cable hooks that allow for more and thicker cables than the ones that come with these Amazon monitor arms. Two hook sizes available - normal and larger Both hooks latch onto a 3x2cm rectangular monitor arm Works great with PLA…
https://github.com/ntchris/voron_mod_super_diy/tree/main/ercf_v2/filament_tension_sensor_hall Inspired by Annex-Engineering's Belay sensor module https://github.com/Annex-Engineering/Belay Inspired by jmillerfo 's Voron ERCF Filament…
this is a 20mm wide hook for on the side of your bed. i like to use it to hang my charger.
Wandhalter für den IKEA NYPON Übertopf in 12cm Beste Stabilität bei 3 Wandlinien und 25% Infill. Im Außenbereich am besten ASA oder ABS verwenden.
This model was designed for Asus Prime AP201 ATX (mATX) case, and some big tower CPU cooler, like Thermalright Peerless Assassin 120 etc. Size 120x120 (12cm) like 12cm fan. 65mm (6.5cm) height - can be modified (scaled in Z-axis) in your…
This 2cm rod wall mount is perfect for securing curtain rods or other items. To mount you need one flat screew in the middle.
Tonbandspule im Braun / BASF - Design in 22cm / 8,5" Spulenkern auf 100mm modifiziert, mit zusätzlichen Schlitzen für das einschieben des Vorspannbandes beim aufspulen. Seitenteile im 219mm Durchmesser, im Braun Design. Beschriftung der…
Printed with SBS filament from Filx at 70% infill density For outdoor use you can also use PETG or ABS Please add a photo of your print to Makes
This is an Apple Watch 10 stand for a 2cm aluminum bar that I have under the monitors where I place my own gadgets.
The blower fan mod will hit the camera when X moves towards the end. This remix attempts to mitigate that.
Its a longer Window Hook, when you have big stars to hang on your window, without laying on the window itself. I printed mine with PLA, but for stability, i would recormend printing it with ASA/ABS.…
I changed the height on one side to 4cm because I cut off the Forböttra weirdly
I made a simple one fitting for 12cm broad decking boards. In addition I made small spacers for having the right margin to the wall or inbetween the decking boards.
a 12cm x 14cm box with a chamfered edge on the inside to insure a correct fit, a 4mm wall thickness on the sides
My daughter wanted to keep her TÅGVIRKE, but with a holder placed on a flat surface. This is the solution. Please consider printing the holder sideways to improve durability of the clips, see bgcode or picture
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
I have remixed original by RNLDNKP (thanks for great design!) to be compatible with 2cm diameter rods . 11.2.2022 UPDATE: V2 Intro: you can remove labelling in Slicer and put there whatever logo/letters you want V2 info: 3 sizes: M spool…
How to use : Take your tank tube and put it through the bottom (the flat side) of the adapter. Put the assembly in the tank Close with the funnel. When you shake their should be very little play How to load : In your darkroom/bag remove…
recomendation: 40 or more infill for a nice strenght, (i try with 20 % and my gopro flew away). I put 2 wood screws and work fine
A simple anchor plate for cable ties. I had some existing power strip holes in the back of my desk and wanted to reuse them to help with cable management (aka - out of sight, out of mind). Screw this to some hidden surface behind a desk…
Hello. I need to “repair” my 1080Ti fans because they started to make some weird noises and low the rpms, temperatures go higer, and… why no temperature and noise reduction upgrade ? First I want say the photos are of the first functional…
Mountign bracket to mount lighter things to a T-beam without drilling hols to it. There are tunnels for 4mm Zip-Ties in different dirctions where things can be mounted. Two M5 threaded inserts are needed to screw the two parts together.…
So IKEA in my country decided that they would sell you the BESTA storage units with MITTLED LED spotlights as a bundle, but that they are outright silly and their installers cannot install the featured lights nor give you any help with it…
PCB Mount 8x12cm 22gr on 0.2 20% infill 2 walls M3 mountingholes (6mm max thread + pcb) Ventholes below. Prints without supports Chamfer of any inner corner See my other pcb mounts for other dimenions. Category: 3D Printing
This is addon for my 3D printed Galaxy Cluster rack. 3D Printed Galaxy Rack: https://www.printables.com/model/1173672-10-mini-rack-all-3d-print Print settings: 0.28 PETG
4- Kabelhalter an Halterung für ein Rohr mit einem Durchmesser von 2cm
Model purpose: to exhaust the printer and dissipate heat for the cabinet Applicable fan: length, width: 12cm height: 23.5cm-35cm Inlet/outlet outer diameter 78mm, suitable for 80mm telescopic tube (PVC tube/aluminum foil tube) Except for…
Includes a little space for you to add a card with details, a name, ar date… whatever
Spare part - holder for a globe with a diameter of 22 cm. With an angular scale. Część zamienna - uchwyt do globusa o średnicy 22cm. Z podziałką kątową.
Los agujeros para los tornillos los tuve que agrandar con un destornillador, ya que aun no controlo bien las medias, por lo demás cumple con su función Imprimido con Creality Ender 3 V3 SE en PLA
if you need a different size (Pot Lid outer diameter) write to me.
Hallo Ich habe für die Ikea Hektar Hängelampe 22cm eine Abdeckung entworfen damit in meiner Garage nicht jedes Tierchen darin platz findet… In die Abdeckkappe kann ein Loch gemacht werden für das Anschlusskabel. Oder man nimmt die Version…
This is a simple shelving system that requires just 2-5 wooden boards 8x2. I used 5 boards I already had with about 50cm each. I think you could easily go longer. The top and bottom shelf sides lock together, but this is in no way…
A small table I made for a teacher at school so they don't have to bend their neck. You can use it for whatever you want. Is 12 cm by 13 cm.
Flowerpot bowl 6-22cm inner diameter Print settings 0.2mm layer 6 walls 15% infill No support 10 bottom layers for watter resistance
The center piece for the 12cm card storage box, without slots
Kleiner süßer Drache mit Aufhängung - Breite ca. 19cm Länge 12cm Auch beim Druck mit nur einer Farbe ergeben sich tolle Farbnuancen aufgrund der geringen Schichtanzahl. PLA / PETG 0,2mm oder 0,1mm
Check the description in the the original post for 10cm version. I have printed only 10cm model so far, they are on the photos. Pls comment if anything is wrong.
I found out that my Jabra headphones had too much cushioning to fit into the original hood so I designed a version with a larger opening. This version is for a 2.5cm table and has an opening that's 2cm wide.
This foot lifts the Ikea Alex drawers 12cm up. Now my vacuum robot can easiliy clean beneath it. Also is my worksurface now on a comfortable height. These feet are also recessed and angled on three sides, to make clearance for the floor…
Because barricade stops are cool. MUST be used in conjunction with Praxican hideaway plates: https://www.printables.com/model/1383702-mlok-hideaway-plate-2-lug These plates are necessary to mount to MLOK. Recommended print settings: PLA…
Side wall bracket for a shelf with 12cm spacing. 15% Infill No Supports
This is a separate set for the film plane assembly in 9x12cm size, not the complete camera. for the full set please click here: https://www.printables.com/model/1400858-3dp-minutera-print-your-own-street-box-camera You will need some…
BECAREFUL: Reduce the size to X=33.7968mm Y=33.7989 Z=122.3958mm or X=10% Y=10% Z=10%
Want it printed for you? Buy the print here: https://chris3dprintsstuff.etsy.com/uk/listing/4299659153/reolink-battery-doorbell-2cm-standoff --------------------------------------------------------- While setting up the Reolink Battery…
Overview This is a stylish, minimalist desk or office trash bin/waste bin designed for 3D printing. Its rectangular, tapered shape and lattice pattern give it a modern look while significantly reducing the amount of filament required for…
22x22cm friendly version of the feed hole jig provided in the Ult. Filament Dry Box model.
THICKNESS: 2MM + 1MM = 3MM I dont have printer so I dont know if it can be printed in two collors, Im sorry MEASUREMENTS, inspirated from pinterest
2cm wide and 3mm thickness NO SUPPORTS NEEDED (i dont know if it can be printed with 2 collors, im sorry if it cannot :P i dont have printer myself) Misturi from Demon Slayer anime button inspired
Für mein OpenMediaVault OMV / trueNAS Projekt brauche ich einen Plattenstapel / Tray für vier 3.5'' HDDs. Achtung, es gibt eine neuere Version des Projektes… Der Plan: Unter PROXMOX werden via passthrough SATA Platten an ein NAS VM…
