Liczymy pasujące modele…
VESA adapter for Samsung C34F791 Needed two VESA adapters for my Samsung C34F791's The original parts are 55 Euro and either discontinued or “out of stock”. Made this so i could mount my screens. It fits VESA 100mm x 100mm. Printed with…
UPDATE: Removed the duplicate part and added the missing TOP part. A three-part wheel cap for Audi A6 (4F,C6). The reason is that the logo is in metallic color and the rest is in darker grey. Also, it is much easier to print it that way.…
Very basic doll body designed to print on a bed of 180cm by 180cm or larger. It's a work in progress and will require heavy modification to be usable. It may benefit you to view it as a free base to work with. Only the left leg and hand…
Red Bull 12floz and 8.4floz Cup Holders so they don't spill over in regular size cup holders. I took a road trip recently, and when I take a road trip, I drink Red Bull. I've taken a liking to the blueberry flavored and it only comes in…
This is a simple ho scale wood 24ft flat car. It would be best to print this without a raft or with resin but I wasn't able to at the time.
Vesa Adapter for the Samsung C24FG70 I used the m4 screws from the stand to mount the plate on. I used M4 10mm screws, but had a hard time catching the nut for the bottom so I used 25mm with a spacer for the bottom part. I included the…
Are you sick of the stock mag release? Me too! Try this out and see what ya think. This thing has been field tested and has been on my 64f nearly 2 years now. You may need to file the mag release a little to work with the stock spring.
Nachdem ich die 14-Teilige Herzausstechform für die “Plätzchen-Massenfertigung” :-) gezeichnet habe, stellte ich dann noch eine kleinere Form mit 4 Herzen her. Viele Spass beim Drucken und Plätzchen herstellen. After I drew the 14-piece…
Full disclosure: I set out to make a more compact version of the HYQ14FBW Toyota key fob for my 2024 Corolla Cross Hybrid, but by the time I modeled in the ability to hold the valet key ("Full Size"), it's not too far from the original…
There was some interest in having playtiles for the stagetop gaming table for marvel united. This is a v1 draft of a 4x4 version. I am working on a full 5x5 version, but I'm putting this up for testing right now. After I have this working…
This is a case you can use to put the RadioLink R4FGM receiver into. It just requires that you cut them free from the heatshrink which they come with. Puting them in a case makes it easier to handle in RC cars which are designed around…
JPG Design3D Adapter for the Car Phone Holder by Duane to fit the Audi A6. It fit's into the grove of the dashboard. Thighting it to much could cause markings. You'll need 4x M3x8 Screws. Apapter für den Car Phone Holder von Duane für…
I was dissatisfied with the commercially available choices, and the 3D-printed solutions I came across online were unreliable. As a result, I took it upon myself to create this unique design! The purpose of this model is to be firmly held…
Originally published here: Xiaomi Mi 9 Lite m1904f3bg case by tato_713 - Thingiverse Thanks to the user Meeri , who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models…
The handle consists of 5 parts: 1x Top hinge (30mm height) 1x Bottom hinge (30mm height + 20mm pins) 1x Handle (250mm height) 2x Hinge cover (30mm height) The model uses pentagon shaped pins, to attach top and bottom hinge to the handle.…
If you want to collect rainwater, but don't want to have huge barrel under your gutter, this is solution for you! Instead of throwing empty PET bottle to sorted plastic waste (where else would you throw plastics) you can use this 4funnel…
Modell ausdrucken, an die Wand schrauben und Akkus einstecken. FERTIG :-) Ich habe das Modell mit meinem Vellemann K8200 mit 0.5er Düse und 0.2mm Layerhöhe aus PLA gedruckt ohne Stützstrukturen
FortiSwitch rack ears for: 124F-POE 148F-POE Note! It will NOT fit E series as those have 3 holes for screws. It's based on the OEM ears. I have uploaded the f3d file as well so you can strengthen it if you'd like. Consider printing with…
Wanna have a pair of skis with the new 4FRNT tail attachment, because it looks cool and you think it'd be sweet? Well, it is sweet…and you definitely should. But that means you gotta drill some holes in your skis, and you aint sure how to…
This is an adapter that allows you to use a Fisher Space Pen SU4F with an Olight O-Pen 2. The refills can be readily purchased from eBay and Amazon from a variety of sellers. You MUST use the Fisher Space Pen SU4F refill as it is the only…
Mit dieser Erweiterung für den Getränkehalter kann die Armlehne weiter genutzt werden und trotzdem 2 Getränke platziert werden. Mit dabei sind Adapter für die kleineren 0,33L und 0,25L Dosen. Montageanleitungen und weitere Hinweise hier:…
Da meine Frau keinen Getränkehalter hat, und ich die Armlehne ungerne abgebe, hab ich mir die Zeit genommen und eine erweiterung gezeichnet. Gedruckt mit PLA. Bitcoin Spende: :)…
Super Lube 4fl oz holster for Multiboard snap connection
The mounting clips that came with my Lights were garbage. The lights kept coming loose from them and kept falling on my workbench, so I decided to design a clip that was more secure and so the light could be mounted Vertical of Horizntal.…
This mounting system is for the newest version of Harbor Freight's Braun 5500 lumen 4ft. Linkable LED shop light. I don't like having the light directly in my eyes when working on my printers, so offsetting them by 45° helps cut down on…
FortiSwitch rack ears for: 124F It's based on the OEM ears. Consider printing with a very strong filament and 100% infill. Preferably PC or similar. PETG might work in worst case. I recommend printing with 0.15 mm layer height.
This is a mount for a Radiolink R4FGM receiver to be mounted in front of the rear shock tower on the ARRMA Gorgon. The mount uses the existing mounting holes for the rear shock tower mount. Once mounted the receiver sits in a tray and is…
You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…
Brackets to mount a Creative Stage Air speaker on a Vizio D24f-G1 TV using the feet mount holes when it is hung on the wall with a VESA mount. Includes retainer clips to hold the speaker from sliding out the end. To attach, mount one…
You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…
A mount a MSI G274F monitor (27'' monitor in photo) The MSI monitor has a mounting space for a Vesa75 (75x75) and the supplied mount of the Amazonbasics monitor mount is 100x100. Created the mount, rather than buying one. The mount was…
Anstelle des Aschenbechers, den eh keiner braucht. :) Hab ich in PETG gedruckt. Bitcoin Spende: :)…
Avant TDI Logo im Retro RS2 Look. Ersetzt das Quattro Logo mit der Teilenummer 4F9 853 736.
No supports needed for the print. Would recommend either PETG or ABS depending on where your filter is located in your house. The filter comes with some screws, but M6 screws with a coarse thread should work. M6 Screws should also work…
I modified Nucular's original P24F to surface mount to fit under the seat of my eBike frame which is the Vector Vortex frame seen here https://vectorebike.com/frames/vortex
The firewall is not available for purchase from horizon hobby except as part of a whole fuselage. My plane was fine except for the smashed motor mount and firewall. So I designed this printable replacement firewall. It is compatible with…
Jon's description from the original model is quite good and very detailed. Short of coping and pasting it here it could not be done any better. ParametricBox-4FCv1.0_Rev1.2 has a thumbnail catch on the lid to make them easier to open.…
Shingles scaled to 1/12 actual, arranged according to the installation instructions.
It is an F4F Wildcat. Its an easy and quick print. No the prop isn't uneven, its a 3 bladed prop.
Wishek - 14ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 32 copies of 28in disk blades and 1 copy of 25in…
Just a simple clip-on stand for the Trust Trino webcam. One of the file is just the clip, if someone wants to customize it. Print this object on the side with support everywere with top/bottom clerance of 0.05mm, 3 perimeters walls and…
Picked up these branded 4ft long, chainable hanging lights. (Mine are specifically these Dakason lights ← amazon link, non-affiliate.) Normally you can only “link” them in a straight line, but I wanted a nice square, so I modeled up the…
Professional-grade speaker enclosure specifically designed for the 4FE32 Faltal speaker, engineered for guitar frequency testing and versatile audio applications. Design Features: • Precision-Fit Design - Custom-engineered for 4FE32…
I wanted to make a large shop flag so this is what I came up with. The top layer is a single monotonic line and I hid snap links underneath so it can all click together. See the 3MF file for the height modifier to get this effect. Design…
Combined a SCX24 slider and R4FGM case into one unit, so no tape or glue is needed to mount receiver.
Das ist ein Ersatz für mein Tankdeckelband das Orginale ist nach paar Jahren zerbröselt. Orginalnr. 8E0 201 556. Für Flexibilität in TPU drucken. Viel Spaß damit. Category: Automotive
Parallax wheel for VectorOptics Veyron 3-12X44FFP Rifle Scope is 52mm diameter ring to help focusing. It is a snug pressfit to scope parallax adjusting knob.
Handyhalterung zum reinklipsen in die Lüftung.
simple and minimalist stand for Lenovo tab4
jpgdesign3d.de 8,5Jx19 ET48 4F0 601 025 L 1H7 Einfacher 3D Scan einer BBS Speedline Felge. Nur die Vorderseite. Simple 3D Scan of BBS Speedline rim. Just the front of the rim.
Replacement bumper for SB-1664FN Bostitch finish nail gun. Printed with TPU 95A 0.16mm layer height Turn up walls, shell layers, etc. so it prints solid Some support is necessary - print with the skinny flat side on the build plate (as…
This is a simple, but functional loudspeaker enclosure for TB W4-1320SIF driver. Inner volume is ~3 liters and reflex port is tuned to ~65 Hz. I use these speakers personally in my work for Teams meetings and background music. They should…
This is a bracket to hold a 60x25mm fan on top of the CPU heatsink on a Supermicro M11SDV-8C-LN4F motherboard (or any similar model with the same heatsink dimensions). This is designed so that the fan is "floating" above the heatsink, and…
Zahnbürstenhalter für 4 elek. Zahnbürsten! Dekoratives Design mit Sockel damit Wasser abfließen kann. Einfach zu Drucken aus PLA oder anderen Materialien. Wände 3 Infill Gyroid 15% Layer 0.2
Mounted Chisel Plow - 13 Shank 14ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
This is a bike or carmount for the Oneplus 7 Pro smartphone. It snugly fits the phone without any case and features an integrated angled USB-C cable for docking purposes. The backside has a quick4fix plate so you can mount it to all kinds…
Field Mulcher - 14ft - Style 1 - 1:16 Scale Uses M2 Screws and three M1x4mm screws There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import…
0.20mm x 3 loop wall x 25% + NO support
Fitted all the DXF files into a single 2x4 sheet of acrylic. Material can be purchased from Grainger for $35: https://www.grainger.com/product/Acrylic-Sheet-0-125-in-Thick-1UNU2?opr=ILOF
The Supermicro M11SDV-8C-LN4F motherboard has a low-power 30W EPYC 3201 and ships with a passive heatsink, but under load the heatsink does get uncomfortably hot. Adding even a tiny 40mm Noctua Fan is enough to keep the temperatures under…
This is the servo motor cover for the 4fl variant of the YPVS control unit. It houses three shafts (d=3mm) internally and the 8 mm output shaft going out of the front. The output shaft is sealed via a shaft seal located at the inside of…
Human ankle with complex fracture, AO classifiacation 4F3 + 43C3 The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
brackets for hanging lights without the need for long chains.
Missing piece for Audi 5 spoke center cap - part number 4F0 601 165 N I was missing one of these parts on my wheel center caps, so I quickly reverse engineered it. I printed mine in SLA Durable Resin, painted with some random silver spray…
A simple box to hold my Rx Corona R14FA in my towing plane, MPX BigLift II Category: R/C Vehicles
In der Mitte einfach einen Schrauben reindrehen, daher die Halterung mit etwas mehr Infill drucken ;)
Print in TPU, without supports, 1 top and bottom layer, 2 perimeters, 10% infill gyroid. Position with the flat surface on the build plate. You can increase print speed significantly over the defaults. Recommend printing one at a time, to…
ENGLISH: These are two versions of the 4x can or bottle holder - same design, different size. 1) The "XS" version is optimized especially for 0.5l cans or plastic bottles, which have up to 66mm in diameter. It was designed very tightly…
I printed this in Draft with 4 walls with a 0.8 nozzle with PETG that really needed drying and it is really strong. The default print is 10mm tall, if you flip it over and print it 8mm into the bed you get a nice front plate to sandwich…
This is a replica of figure F from the box "Tomb of Spells", number 5004 from Grenadier (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:G-albs-WW08f.jpg&oldid=186126 ) "Skeleton, Axe" Reproduced using…
Adapter for Mounting the Samsung S24F35 Monitor in a Vertical Position. The VESA 75mm holes are not centrally aligned, and the back of the casing is slanted. This results in the monitor being mounted not only asymmetrically to the base…
Bauteil zum Verbinden von int4filia Boxset-Straßen V1.0 mit massivem Steg V1.1 mit hohlem Steg
3 piece mount for 4ft powerstrip, printed in PLA+ print at 100% infill or with enough walls to make solid
Replacement front fork protector guides for Yamaha YZ125. These parts replace the OEM Front Fork Protector Guide Comp. 1 and 2 (5DH-2314F-L0 and 4SS-2314G-L0). Designed as 3D-printable replacements for the original plastic guides that…
Torx key handle for scope torx screws (T15). Fits torx key that is supplied with scope. Much nicer to use than plain metal torx. When printing add pause to end of layer +7.64mm and insert key mid-print. Key has to be inserted snugly to…
Fan Mount for Xray X4F (it fits my X4F '25). Apologies for the bad photos/print - however the part is fully functional and does the job nicely. Needs a M3 * 8mm screw to hold the fan mount to the bulkhead at the same place as the official…
LED ring that fits under a Sony lens instead of the original lens hood Compatible with 10mm LED strips
Shingles scaled to 1/12 actual, arranged according to the installation instructions.
Zahnbürstenhalter für 4 elek. Zahnbürsten! Dekoratives Design mit Sockel damit Wasser abfließen kann. Einfach zu Drucken aus PLA oder anderen Materialien. Wände 3 Infill Gyroid 15% Layer 0.2
Fan Mount for Xray X4F (it fits my X4F '25). Apologies for the bad photos/print - however the part is fully functional and does the job nicely. Needs a M3 * 8mm screw to hold the fan mount to the bulkhead at the same place as the official…
Field Mulcher - 14ft - Style 1 - 1:16 Scale Uses M2 Screws and three M1x4mm screws There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import…
I Cleaned my intake manifold and I broke plastic inserts. Here you can find my design for 1.7 CRDI. Printed from PA. INSTALLATION AT YOUR RISK.
LED ring that fits under a Sony lens instead of the original lens hood Compatible with 10mm LED strips
nice sword i made snap together pieces and a whole for dowel. .4mm nosel .2mm layer height good luck
Actually not a remix but a remodel based on this because the original file was a bit sketchy. Heavily reinforced and added longer posts to fit both the 24" and 27" (and similar) models. Print Settings Supports: Yes Infill: 50%
Wird in dieser Lage ohne Stützstruktur gedruckt.
This mount is designed to securely attach a Lexin Intercom B4FM to a Nexx Y.100R or compatible Nexx helmet. It combines two existing designs into one refined solution, offering a snug and stable fit — no more unreliable clips or adhesive…
I needed l ow p rofile f eet for fitting the TV in a kitchen cabinet. I'm not sure if this will fit other Vizio TVs , but it might . I made some additional mounting holes in the feet for screwing down, as there is no support to keep it…
printed on Bambu X1C. I added all parts as stl and 3mf. the 3mf are precoloured for AMS and a Mono color set. this is a 8x 1kg spool print. sorry I did what i could to make it strong enough to go outside. arms work and can hold a candy…
This is a 1:32 scale OSHA-compliant safety rail , modeled after a 4-foot industrial guard rail commonly found in warehouses, loading docks, and industrial work areas. It pairs perfectly with: 1:32 pallet racks Loading docks Forklifts and…
I Cleaned my intake manifold and I broke plastic inserts. Here you can find my design for 1.7 CRDI. Printed from PA. INSTALLATION AT YOUR RISK.
This is a replica of the classic Couatl miniature F from the Grenadier Action Arts series box 8004, Fantasy Fiends. http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:G-albs-8004f.jpg I don't have the original wings.…
4fach Bürstenhalter inkl. Aufnahme für ein Ladegerät. Auf den runden Kreisen können die Anfangsbuchstaben der Personen angebracht werden. Vielen Dank an masselkopp von thingiverse, der mir sein Modell zur Verfügung gestellt hat, um die…
This is a (partial) remix of the Bear Extruder for use with the Prusa MK3, which makes use of a BMG shaft/axle and a NEMA14 round pancake to create a geared printhead with a much lower weight. Replaces the body & idler-door from the Bear…
https://www.youtube.com/watch?v=KhLWvCct6ng&ab_channel=MarcinPaska
