Liczymy pasujące modele…
A basic yet functional case for a power supply module. It can be easily printed. Similar modules should be compatible with them too, but I have tested only this one. To assemble the case, you need a drop or two of glue. You may need to…
BASIC MODEL: ZK-4KX Buck Boost Converter
Mini DC power supply Based on ZK-4KX DC to DC Buck Boost Converter Input: 5-30V Output: 0,5-30V; 4A Necessary parts: Its based on ZK-4KX DC DC Buck Boost Converter, that you can get for around 10€ from Aliexpress . For the banana plugs…
Simple enclosure for ZK-4KX or XK-4KX buck/boost DC-DC converter. A lot of big vent holes from all sides for better cooling. Wires can be mounted and dismounted without removing the device out of the case. An additional external fan is…
This is designed to work with the ZK-4KX , but will likely work with many similar products like the ZK-SMC01 Stepper Driver with a few mods. ZK-4KX Buck Boost Converter Panel/Lid 2x2x5 Gridfinity Container with ventilation Hexagons are…
Milwaukee M12 Battery Power Supply ZK-4KX 35W MODULE CASE TOOLS / HARDWARE NEEDED ------------------------------------------ 1X ZK-4KX BUCK BOOST CONVERTER (35W) 2X 14/16AWG FLAG TERMINALS 2X 24mm - 1/4" Male Spade Crimp Terminals 6.3mm…
Case for a ZK-4KX Buck Boost Converter Power Supply The power supply slides in to the case and stays in with some friction. The wiring terminals remain open. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
During assembly, its the easiest to first install the banana jacks and put the cables on them. Insert the cables into the ZK-4KX before putting it into the print. It is quite hard to insert the wires, when it is in the 3D print, but you…
A simple bench power supply case. It's powered from the wall power outlet, and can manage maximum of 30V, 4A or 50W, whatever comes first. I supplied links to necessary electronics parts below. I printed my case in gray ASA - if you want…
Prints in place without supports. The left-right fit could be a little tighter, however it does not fall out. Rubber Feet could help against sliding, as well as some weight in the back. you could glue in some old washers or other stuff.
Using a PDC004 usb c 20v decoy board. Either glue the usb c board or secure it with a 2x6mm screw (2M) and nut. Onshape link:…
Portable and lightweight DIY power supply with 5-30V input and 0.5-30V, 4A output. Parts to buy. ZK-4KX (XK-4KX) Buck-Boost converter (71.6/75x39.3 mm hole). Switches 250V, 6A, for 19.1x12.1 mm holes - x2. Banana Plug Socket for max. D6.3…
Enclosure for ZK-4KX buck converter/power supply. vented and non-vented enclosure. faceplate configured to use ring term
I'm not a professional so don't judge me harshly) The holes for air and for the bolt I think it would be better to make a bit bigger. Print Settings Printer Brand: Creality Printer: Ender-3 V3 SE Rafts: No Supports: No Infill: 30%…
This is retro style enclosure for XK-4KX buck boost converter. For power supply you can use 12 or 24V max 4A power supply if you going to use the same USB ports. If you want to use different USB port you need to double check correct…
Español: Esta es una carcasa para la fuente de poder ZK-4KX pensada para ser alimentada por medio de USB-C por medio de un múdulo Power Delivery breakout board. English: This is a case for ZK-4KX designed to be powered by USB-C using a…
Front and back parts glued to the bottom. Cover fixed by TEX. Fan 40mm. Created in Solidworks for makers. Feel free to use it or modify.
Remix to accommodate the components I wanted to have on my portable power station: ZK-4KX variable power supply buck-boost converter XT-60 panel mounted connector as main power interface (still on mail order thus for now cable coming…
Fairly simple make I did to learn YAPP I printed in ABS, should have used Brim for lid. USB https://www.aliexpress.us/item/3256805999439786.html
A simple enclosure for a ZK-4KX power supply module. Will include step file at some point. No supports needed.
I printed with ABS at 0.16 layer height in 4 perimeters using supports.
Used USB-C Power supply module: https://www.aliexpress.com/item/1005006615459878.html?spm=a2g0o.order_list.order_list_main.91.26eb1802BhxGB7 Connectors: JIALUN AT-BP2043A
Front and back parts glued to the bottom. Cover fixed by TEX. Fan 40mm. Created in Solidworks for makers. Feel free to use it or modify.
This mini power supply module is based on the ZK-4KX converter and delivers an adjustable output from 0.5V to 30V, up to 3A. I have a bunch of 18V Bosch Professional batteries around, so I wanted them to power the module in order to keep…
![ZK-4KX (XK-4KX) Buck Boost Converter case / enclosure [with kickstand]](https://media.printables.com/media/prints/1206781/images/9063784_e70ddd2d-ac79-4964-b421-66d14797163d_021b12bd-20d7-4a8e-b4c6-feda49e16809/pxl_20250225_104810433.jpg)
