900 modeli
Printable parts for the MK2/MK2S/MK2.5 to MK2.5S Upgrade. Note this is a legacy download. As MK2.5S is an upgrade for the older MK2, MK2S or MK2.5 printer, other parts not listed in this print are available as the MK2S parts:…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud. I modified the original version model to be easy printable with FDM printers. The original source:…
Resin vat drainer for anycubic photon mono Summary Resin vat drainer Print Settings Printer: Voron 2.4 Rafts: No Supports: No Filament brand: PolyMaker Filament color: Black Filament material: PETG Notes: Resin vat drainer
The model can be printed with PLA or PETG, the orientation is clear, no supports are required. Layer thickness of .2 mm is suggested, with 3 lines for the walls. The infill is not relevant because the thickness is a little more than 2 mm,…
I've made this model to assist with people developing new modifications for the printer going forward. If you find any issues let me know and i can do some fixes. A few notes this is the 2022 version of the printer that comes with the…
This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…
BMW 5 series (E39) silhouette wall art. For the true Gearhead! Can be placed on a bookshelf or attached to a wall with some blu Tac, sticky gum. Someone asked me if could do some wallart based on the iconic BMW E39, i could not find a…
I couldn't find many cases for the M5StickC PLUS2 that I liked, so I made my own. This is a simple case which will protect the device and allow you to carry it with a lanyard or a key chain. The M5StickC PLUS2 is just press fit into the…
This is for use with PRUSA i3 MK3S+, MK3S+:MMU2S & MK2.5S+ printers. Designed to be used with TheZeroBeast MK3S:MMU2S Firmware here... " https://github.com/TheZeroBeast/TZB-MMU2S-Firmware/releases " V3 Changes combine with R6 stock…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
Fit to Parts: Extruders: -Sherpa Mini -Hextrudort -LGX lite -HGX lite -Orbiter 2.0 -Orbiter 1.5 (see adapter plate) -Sherpa micro (see adapter plate) -Bowden -BMG like (see adapter mount) -Titan (see adapter mount) Hotends with BMO/V6…
I wanted something to protect my Cardputer when I carry it in my jacket pocket. Buttons, power switch and SD card are all accessible on the back without removing the device from the case bottom as well as the USB-C port on the right (the…
There are a few vat drain stands but non of them are like I wanted to have one. For this drain stand you need a 20x10 aluminium profile or a standard 20x20 with M5 nuts for this profile. For the M5s and M3 vat holder, a M5x40 screw is…
This design is now outdated, V3 can be found here https://www.prusaprinters.org/prints/66215-tzb-mk3smk25smmu2s-extruder-mmu2s-no-tower-v3 This is for use with PRUSA i3 MK3S, MK3S:MMU2S & MK2.5S printers. Designed to be used with…
The side up orientation should help a little with strength and you shouldn't have any issues printing this as you would with any other model without adding further supports in slicer. Credit to…
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4976173 . The Tronxy X5SA is a very cheap printer with some pretty serious problems. The factory belt path is far from ideal, the motor and pully mounts are…
A lid for the vat of Anycubic Photon Mono M5s with a handle, suitable for smaller printers (printed on my X1C in PETG). The print is in 4 parts - left, right, handle, and center connection.
Stock, acrylic brackets provided by Tronxy are weak and crappy, tending to bent under the tension of the belts. Additionally, they are forcing the Y motor pulley to be positioned unnaturally high, creating a lever effect and bending both…
I needed some holders for 5s pack to repair my drill battery so i made this simple model. Inside diameter is 18.3mm (mine fit perfectly, but it was too small for some cell so you might need to scale it up a bit), height is 10mm but you…
Whenever you want to have your Twotrees laser engraver higher...
Hey folks, This is a repaired and remeshed version of Panderazo's DC-15s pistol. I've made the following modifications: Joined small triangles Englarged the inside diameter of the barrel and made it 190mm deep to fix the mesh clipping…
DRIP BRACKET FOR PRINT PLATFORM. ALIGNED TO THE WHOLE VAT
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
Created a spacer so I could add GPIO headers and a bit more space for larger battery. Short M2 screws needed to hold the spacer on. Make sure there is enough clearance as the front cover screws use the same thread. You can probably…
UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…
The colour change is at the 1.80 layer at a 0.2 layer height with a 15% infill you can use the blank and Prusa and original Prusa covers for either the mk4 or the xl/MK4S/MK3.5S/MK3.9S/CORE ONE+/CORE ONE L+ add a like
IF YOU KEEP HAVING THERMAL RUNAWAY THEN replace your fan shroud with this one, it reduces air flow from the fan across the heat block. This should fix your mk2.5s upgraded printer and not require a silicone sock or fan speed adjustment in…
Update: 9 July 22 - Added a new extruder design. It's designed to work with an LGX Lite and Dragon (and maybe Mosquito) hotend. It's designed to be ultra-compact and will enable you to scrape in a 400x350 bed if you wish (I run and…
Printed with Prusament PETG Jet Black 0.2mm support is required on the bottom piece.
files to enclose your Tronxy X5 330 and 400 Top enclosure see: https://www.printables.com/de/model/557547-tronxy-x5-enclosure-top-printed
Protective caps for Li-Po balancing connectors - JST-XH 2.5mm. Available sizes: 2S, 3S, 4S, 5S Additionally, more sizes can be made by editing the original STEP file (slicing in the middle and adding/subtracting 2.5mm). Please print a…
This allows you to replace the stock E3Dv6 hotend on a stock Prusa MK3s/2.5s with Slice Engineering’s Mosquito hotend. This installation uses the existing mounts and 3mm hardware found on the Prusa. You will need to provide a short…
Samsung Galaxy A05s cover I realy liked 3d honeycomb effect with 40%infill, that creates almoust fabric like texture. A05 cover does not fit to “s” model, but I think this will fit to A05, but side buttons slots are bit too long. TPU…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
Its a battery holder for your LiPo batteries its easy to use just put your battery inside and use (sorry for my bad english)
You can keep the whole logo blue/black or choose to color it with the original colors like i did (in your slicer). I printed mine in PLA/High speed PLA using 3 walls, 3 top/bottom layers, 15% gyroid infill and 0.2mm layer height on a…
I got tired of my small collection of 45s not having a proper home, so I designed this holder for them. Print instructions Download. Slice. Print. Repeat if necessary. How I Designed This Original design in OpenSCAD . tweaked a couple…
When assembled with a magnetic flex plate it is the same height as the factory build plate. Version 2 includes the bottom and top part of the build plate as a complete replacement to the original. Version 1 is just the bottom part of the…
Подвес платформы для Anycubic Photon Mono M5S
Here's a quick model for anyone looking to design their own keyboard case for the CardKB
Zero Clearance insert for the R225 mitre saw from evolution power tools. It has a dust box on the bottom with an opening at one end. This prevents dust from falling out the underneath of the saw and encourages dust to be flung up from the…
Tronxy X5SA Pro to MGN For X5SA non Pro, you need smaller idlers like Pro (14mm) Heat inserts: M5 (OD7) Lenght 5mm Extrusions: 2x 20x20x460 1x 20x20x450 / 15x15x450 (or CF/Aluminium tube) MGN rails: Y-axis 2x MGN12 400mm/450mm (460mm max)…
Want to arm your clone legions? Stud shooters getting you down? Say no more! Introducing the minifigure scale DC-15S blaster rifle! Perfect fith for Phase two clone figures. The entire body is built on a 3.2mm diameter shaft, meaning any…
If you look along the Z-axis supports (the ones with the bearings), you'll probably notice that they curve due to the weight of the bed. This was a concern for me as I don't want the bed flexing as more plastic gets added to a print. Many…
I printed in PLA, any material is ok. Please note than I had to print a new board support in order to move usb cable on the right allowing to put the board on the left. This is needed to shorten the path as much as possible otherwise new…
Replacement clamp to mitigate the issues of rods being too short or pulled into the extrusions. Designed for the X5SA Pro 330. Not sure about other models. The screw holes on the X5SA are not precisely equidistant from the Z-axis rod.…
Prusa box is a kit enclosure for Prusa mk3s mk2s mk2.5 manufactured in France. kit includes : Brushed stainless steel part PMMA clear screws and nut Printed part is available on our website: https://www.printer-box.com/download/…
This is a remix of Wardy89's MK3S filament guide on Thingiverse ( https://www.thingiverse.com/thing:3425397 ) This is designed to fit the Bondtech BMG upgrade for the MK3S and the MK2.5S with either the V6 or Slice Mosquito Hot ends. The…
ACCESORIO PARA ESCURRIR LA RESINA SOBRANTE DE LA IMPRESION. DISEÑADO PARA LA SERIE PHOTOM MONO M5S Y M5S PRO PARÁMETROS DE IMPRESIÓN 3D PLA / PETG BOQUILLA 0.4 ALTURA DE CAPA 0.2 RELLENO PANAL DE ABEJA AL 15% SOPORTE EN LAS ZONAS DE…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
This is a struggle-free key to unscrew the festo on the extruder on Original Prusa MK3S MMU2S i printed it with some brim (5mm, just to be sure). video assembly here -> https://youtu.be/gdtvrrcML6s
The M5Stack Cardputer Modular Expander is an extension board designed to enhance the capabilities of the M5Stack Cardputer. This expander provides you oportunity to add add additional modules: WIFI external antenna, CC1101, IR Transmitter…
M5Stack Cardputer is interesting piece of hardware. It's quite hard to use when flat on the desk. This angled stand will raise it by 15°. Stick rubber feet to bottom to stop it for sliding. The stand slots into LEGO-compatible holes on…
The resin-printed fan shroud has smoother surfaces and better reproduction of the model's details, which helps to give the airflow less resistance. Because the fan shroud is exposed to heat, as it is located next to the heater, it is…
Printer brand: Anycubic Printer: Kobra 2 Supports: No Resolution: 0.2-0.3 Infill: 20% Finished product weight: 47 grams
Recommended to print at 5% infill with additional wall support. No supports needed and no screws or other fixings. Clean up the posts and check they are not too tight before placing the Cardputer on too firmly, it should lift off with…
Update 7/27: Added v3.3 fan housing which moves the down angle from 20 degrees (v3.2) to 5 degrees to direct airflow more directly at the nozzle and less onto the bed. * Experimental * Update 6/18: Added v3.2 model files. This version…
M5Stack is set of electronics development modules. Some of them have cute magnetic stand, but most does not. This one isn't magnetic, but is parametric, so you can change its height, angle... Use M3 screws for attaching the unit to the…
I highly recommend using a resin printer. Category: 3D Printing
Direct drive mod for the Tronxy X5SA-Pro. I wasn't happy with the alternatives for making the Tronxy X5SA-Pro a direct drive machine, I wanted a stable modification, that wasn't prone to wobble, that required no permanent modifications to…
Easy print, fits the Prusa MK2, MK2S, MK2.5 and MK2.5S. I added a new (Sticky) version that attaches with double sided tape. (3M, Gorilla, etc.) This new (Sticky) version will work on all MK2 and MK3 printers!
In the absence of any information online and despite the terribly incomplete video by Tronxy, I installed their direct extruder kit. I wanted a way to mount the filament spool above the printer in order to avoid the Bowden tube and its…
A replacement bezel for the M5Stack Dial - print in any colour to fit in with the rest of your build. I didn't like the orange and grey scheme, so measured up the parts and designed simplified replacements.
Instructions on how to install this can be found on the original page . Modified to allow mounting with the stock carriage screws, as well as to provide room for the endstop cable. Also modified the heatset slots where the sensor mounts…
Simple fan duct for the Tronxy X5SA-2E. This is a remix of the original fan duct that was in the original sd card, I simply added two new directions from where the air can come out. The original one had issues cooling the parts of a print…
Needed an old iphone for something and I figured there's no point in buying a $10 case for a $15 phone. I've dropped it twice already and it still looks fine. Some supports are needed but they werent hard to peel off.
Thanks To SnappyFPV Just a Remix for 2s 3s 4s 5s & 6s JST-XH balance connectors. I didn't test them all please let me know if they work. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category:…
I couldn't find an easy and quick Bike Mount for the Garmine Fenix 5 Plus like the Quick Release Mount for the Forerunner 935. So I deceided to design one. I have 8 designs: the first for F5P and the Quick Release Mount plate from the…
This is quickly prepared in Fusion 360 to have any print cooling on my MK2.5S with Volcano hotend. It's not optimized or flow-tested in any way, I pretty much just roughly extended the stock shroud. Use ABS or similar high-temp plastic…
A simple remix of hippazoid case but for the Cardputer ADV version and the M5Stack logo. I kept the original parameters for the print: 2 walls, 3 top/bottom layers, 15% gyroid infill and 0.2mm layer height.
This a slight remix of the corner protectors for the X5SA Pro created by Christian Pauli on Thingiverse ( https://www.thingiverse.com/thing:4589073 ) that allows them to fit correctly on the Tronxy X5SA (non-Pro version). The original…
V5 whit complet acces to the USB PORT
Belt guard for X5SA 330x330
Reference model for making cases and such, keep in mind that I measured the physical device with calipers, so it's not perfectly accurate, but that's what you get when a DIY company doesn't release any real specs.
I liked the X-Axis motor mount on my MK3s much more than the one on my MK2.5s. They aren't directly swap-able because the MK3s does not use the end switches for homing like the MK2.5s. I re-mixed the R3 Prusa model slightly to add the…
This is an easy and fast mod to Synchronize the Z-Axis motors of the Tronxy X5SA-400. I've not tested this but this mod should also be compatible with the standard X5SA with 300x300 bed, you'll need a shorter belt. This mod is not…
The fastener is best printed from PETG or ABS, Glue the camera itself to the mount using 2-sided tape.
Print details: Material: PLA Printer: PRUSA i3 MK3S+ layer height: 0.20mm Supports: no Infill: 15% [English] The PTFE tube inserted in the hotend of the PRUSA i3 MK2.5S/MK3S/MK3S+ must be bevel-cut at both ends at 60 degrees. It is…
Eine detailierte Anleitung liegt diesem Projekt in PDF-Format bei. Support wird nicht benötigt. Drucken am besten in ABS/ASA. PETG und PLA sollte aber auch gehen. Druckausrichtung (nicht ganz unwichtig) ist in der Anleitung erklärt.
this is a wrist band for M5Stick-c micro module esp8266 compatible. version v2 is more confortable. i used 2 stainless stell spring bar for watch and simple velcro band Print Settings Printer: Prusa i3 homemade Rafts: No Supports: Yes…
Stand for the M5Stack Cardputer-ADV. The pegs are not a friction fit, just for locating. There are pockets for 5x3mm magnets to hold the Cardputer to the stand. Designed to work well with the Cap LoRa-1262 module attached
This is a gantry conversion kit for the TronXY X5SA 400. It should work with the other X5SA models however you'll need to adapt the length of the linear rail (450mm for X5SA 400). Check out the installation video here:…
Prusa i3 MK2.5S/MK3S X carriage with M3 heat set inserts based on original R7 stl. This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another…
Hello, This case allows you to attach and protect the M5StickC and M5StickC-Plus to any stand. There are two attachment options; screw-on or elastic. The screw-on option is ideal for any flat surface. The elastic option is ideal for…
Created mostly from scratch based on https://www.thingiverse.com/thing:2986538 . My Palette 2 sits on top of my Lack enclosure and I was having issues with the PTFE popping out of the rubber grommet. This design more securely clasps the…
These mounts are designed to work with M5Stack modules and the cameras. They are very simple in design but work very well. I haven't tested the camera tripod mount yet, this one needs a square nut inserted for use on a tripod. I designed…
The M5Stack Cardputer pins extender, gives to opportunity to use 8 extended pins [ 5V, GND, G1, G2, CLK, DAT0, CMD, 3.3V ]. Throw this pins you can easily attached CC1101 , NRF and more other modules. For assembling process and additional…
Added some standoffs in the Manta E3EZ patern, but that model is a ‘beta’, haven't printed it yet (but the standoffs are properly positioned for the E3EZ's mounting holes). Side case for the M5P Manta board on a X5SA printer. I used a 2nd…
Print 4 out of TPU and push them in to the existing feet.
Reinforced motor mounts. Shouldn't need support.
This provides a solid mount for the idler pulleys, and a stop for the Y-Axis if you're using sensorless homing. Also clamps down properly on the Y-Axis rails without the little gap that the stock mount leaves.
Based on vzbot fan duct design, created my own low-cost version which uses two 5015 blower fans instead of using WS7040 printed with ABS or PETG CPAP hose I use https://a.aliexpress.com/_mM4FWka https://github.com/VzBoT3D/VzBoT-Vz330 Buy…
I liked the emergency stop paddles I saw on other table saws, and I wanted one! I have made one with two parts. This has an attachment fitting, in which the inner surface is shaped to match precisely the piece that it is mating to. It can…
Hi everyone! This is my first upload and my first true 3D model edit. This is a protective pelican style case that holds two M5Stack core units. It will hold Core, Core 2, and CoreS3, as well as modules like the Battery 13.2, PM2.5, etc.…
This is just an adaptation using Tinkercad of the part designed by DropdeadFredd. I needed it to be 2.4 mm longer and 0.6mm thicker to have an almost perfect fit, so I did just that. Thanks DropdeadFredd for the original files. Printed…
A adaption of https://www.thingiverse.com/thing:160391 Bahtinov Mask Generator by https://www.thingiverse.com/brentb I removed the handle (which will break) and replaced it with a ring around the center and set the defaults for a…
Simple clip for the Ender5 S1 Bowden Tube that attaches to the hot end cable to support it. I did not like the look of the single clip that comes with the printer. Printed at 0.2mm, 30% infill, Hatchbox PLA. Printed without supports,…
Here are some custom variants of the DC15S blaster from the Andor / Mandalorian season 3 flashbacks. These are the base DC15S carbine as used by the Imperial clones in Andor (and in the Mandalorian order 66 flashbacks) but with the scope…
