P
Printablesthall72
Lego Compatible (57900.dat) Minifig Helmet Imperial AT-ST Pilot
This model is compatible with the lego system.
- Pobrania
- 192
- Polubienia
- 36
- Ocena
- 0
Wyniki wyszukiwania: 7900
Liczymy pasujące modele…
P
PrintablesNerro3D
Correa Casio G-Shock G7900-A
Español Correa de repuesto para reloj Casio G-Shock G7900-A. Debido a que he procurado darle la forma de la correa original, necesitarás soporte para poder imprimirla correctamente, pero no supone ningún problema ya que serán mínimos. La…
- Pobrania
- 181
- Polubienia
- 24
- Ocena
- 5
P
Printablestaxilian
Yaesu mounting bracket for 8800/8900/7800/7900 and others
This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS this is surprisingly strong (3mm walls probably help), but you will likely need longer screws than the ones you might (or…
- Pobrania
- 148
- Polubienia
- 9
- Ocena
- 0
P
PrintablesFabio Pires
XFX Merc 310 RX79000XT(X) Shroud Mod
Required materials About 120g of filament (assuming 15% infill) - PLA is fine, but PETG / ABS is preferable 3 x 120mm fans (not every single fan will be compatible; take a look at the instructions for further detail) 12 M3 Heat Inserts…
- Pobrania
- 142
- Polubienia
- 15
- Ocena
- 5
P
PrintablesArek
Handles for Anytone AT-5555N II / CRT SS-7900 / Radioddity QT60
Handles for protecting front and back of the radio while also raising it over surface. Printed from PETG. Create opposite piece by mirroring object in slicer software. Glued 4x round rubber feet (up to 8mm diameter).
- Pobrania
- 125
- Polubienia
- 8
- Ocena
- 5
P
Printables3Diocrity
Philips Norelco Trimmer Organizer for MG7900 MG7910
Philips Norelco Trimmer Organizer for MG7900 MG7910 I just needed a place to store and organize my Philips trimmer and all the accessories. This print holds the trimmer itself and all of the guards and extra pieces. I'm also including the…
- Pobrania
- 92
- Polubienia
- 20
- Ocena
- 0
P
PrintablesStawiamKlocki.pl
HP Workstation DC7900 DC7800 8000 8100 Z400 Z600 HDD Disk 3,5" Brackets Screw
You lost your HP workstation mounting screws? Just print 4 of these :D It's not perfect, but it works :)
- Pobrania
- 84
- Polubienia
- 8
- Ocena
- 0
P
PrintablesCyprien
FormD T1 Anti-Sag Bracket 7900 XTX Hellhound
Compatible with the Formd T1 V2.0/2.1 Configurations possible : 3 slot 3.25 slot I personally recommand you 3.25 slot to avoid turbulence noise. BOM : 1x M3x8 Countersunk screw 4x M3x5 Countersunk screw You need to install first the…
- Pobrania
- 73
- Polubienia
- 1
- Ocena
- 0
P
Printablesnotyahc67
Nikon Coolpix 4200, 5200, 5900, and 7900 Battery Cover Door Replacement
The Nikon Coolpix 4200, 5200, 5900, and 7900 cameras have a common failure where the tabs on the battery cover door break off. This prevents the door from being able to fully close. I've designed a 3D printed replacement for the door…
- Pobrania
- 55
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTatiana Ivanov
Triple fan shroud for Asrock RX 7900XTX Phantom Gaming
Takes 2 120mm fans and a single 80mm fan all 25mm thickness. Sounds way more bearable now at 100% fan speed and i get -5 degrees less on the hotspot. I used 2200RPM fans to better match the old fans. Link to the fan adapter:…
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLynch.exe
Fan duct for Sapphire Pulse 7900 XT/XTX + Fractal Ridge
Bridges the gap between the fans in the Fractal Ridge and the GPU heatsink. Helps with focusing airflow directly over the fins of the heatsink, improving cooling. Requires deshrouding the graphics card. Compatible with Fractal Ridge case,…
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSuchy
120mm Fan Bracket for ASRock RX7900XTX Phantom Gaming
This is a basic but functional 3D-printed bracket designed to mount a 120mm fan onto the ASRock RX 7900 XTX Phantom Gaming graphics card. My CAD skills are still a work in progress, so it’s not the sleekest design out there—but it fits,…
- Pobrania
- 40
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMike Rapt
Philips 7900 series remote control battery cover
I needed a replacement battery cover for my Philips TV remote. The model I found for the OLED803 was similar to what I n
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
Printablesjeangjenq
Support Bracket for XFX 7900XTX
This is a remix of Robatzen's GPU Support Bracket to support XFX 7900XTX in my NZXT H510. If the dimension somehow matches perfectly to yours then you could just slot it in. Printed mine in PETG.
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTwiegel
Sapphire Nitro+ 7900 XTX deshroud mod (120mm or 90mm)
Use this deshroud mod to quieten your Sapphire Nitro+ 7900XTX. Uses 120mm or 90mm case fans for optimized air flow. I recomment controlling the fans via the motherboard trough "fan control", altough a gpu to casefan pin adapter might work…
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAnupK
NR200 PowerColor Hellhound RX 7900 XT Support
PowerColor Hellhound RX 7900 XT Support for NR200 Case
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJim Conner
FT7900 mount to Apache 1800 Grill Insert
Thanks for the great design! I used this design to make an insert for the Apache 1800 insert I created. https://www.printables.com/model/1345498-apache-1800-grill-insert The original model also fits the FT-7900r
- Pobrania
- 19
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTimoglor
Samsung U7900F TV Leg Alternative
Mimics Samsung PNs BN96-60953A or BN96-60954A TV Leg insert designs. Works on the 50", 55", 58", 60", and 65" models. This model has both a right and left model, as well as a re mixable adapter model (No Foot design). Re mixable Insert…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
Printablesaaron
7900XTX Vertical Support Bracket
The Corsair 1000D PC case has a 2U PC slot that s vertically oriented. While it's not designed to contain a full GPU i liked the look of it. However, the support factor was an issue. So i designed and printed a custom bracket to support…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printablesstr0gg
Gpu support for Antec Flux XFX7900XTX
Super sleek minimalist design. If someone don't know what to look for not gone see at all. Design accommodate using 140mm fan on bottom and Aquacool Core reservoir mounted on radiator. Current model is only for XFX RX7900XTX MERC310 model…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablesjardah3
Philips 7900/7940 organizer for rounded corner drawer
Updated for rounded corners in the drawer and added space for a regular shaver.
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGBlades
Dual Philips Sonicare Toothbrush Holder for 5500 7900 Series
I remixed the original to enlarge the opening to hold the toothbrush. Made a little wider as the toothbrush is slightly rounded. Added a square cutout at the back. Added a slight curve to the front to increase the slight added depth.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printables
Fan duct for Sapphire Pulse 7900 XT/XTX + Fractal Ridge
Bridges the gap between the fans in the Fractal Ridge and the GPU heatsink. Helps with focusing airflow directly over the fins of the heatsink, improving cooling. Requires deshrouding the graphics card. Compatible with Fractal Ridge case,…
P
Printables
Triple fan shroud for Asrock RX 7900XTX Phantom Gaming
Takes 2 120mm fans and a single 80mm fan all 25mm thickness. Sounds way more bearable now at 100% fan speed and i get -5 degrees less on the hotspot. I used 2200RPM fans to better match the old fans. Link to the fan adapter:…
P
Printables
Samsung U7900F TV Leg Alternative
Mimics Samsung PNs BN96-60953A or BN96-60954A TV Leg insert designs. Works on the 50", 55", 58", 60", and 65" models. This model has both a right and left model, as well as a re mixable adapter model (No Foot design). Re mixable Insert…
P
Printables
Dual Philips Sonicare Toothbrush Holder for 5500 7900 Series
I remixed the original to enlarge the opening to hold the toothbrush. Made a little wider as the toothbrush is slightly rounded. Added a square cutout at the back. Added a slight curve to the front to increase the slight added depth.