Liczymy pasujące modele…
This remix is based on the original model of JoerT. The original design used magnets of 5x5 which I didn't have available. So I made a modified design that uses 4 magnets of 8x2mm (two in each part) I printed it for someone else (not…
🎈 Balloon Magnet Trio 🎈 | YOUTUBE VIDEO Add a pop of joy to your fridge, whiteboard, or any magnetic surface with this playful set of 3 balloon magnets! Each balloon is 3D printed with vibrant detail and fitted with a strong 8x2mm round…
Remix to use 8x2mm Harbor Freight Magnets https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html
Simple modification of the original lead screw cleaner by @JalShah to be able to use 8x2mm magnets, as those were the ones I had laying around. Tolerance is pretty tight so the magnets can just be press fit without any glue
4 mount holes for 8x2mm magnets. You need to glue the magnets into the holes. Category: 3D Printer Accessories
If you liked this model, go ahead and add a like on the original! This remix is just cosmetic :) I had a problem with the magnet holes being too deep, so I created a remix.
Fixing magnets below GW bases isn't easy, the magnet is never perfectly flush, decreasing a lot effective strength, and can detach from the base. Best printed in ASA or ABS, for strong gluing with plastic glue to the base. Then 8x2mm…
A simple bracket to mount an 80mm fan under a radiator. So the natural convection can be supported. The fan can be mounted either with M4 screws and nuts or with rubber decouplers. The fan is held by four 10x2mm neodymium magnets per fan.…
Printed in PETG (no support was needed) 15% cubic infill 0.2mm height i used 8 8x2mm magnets (make sure the poles are facing the correct direction before you push them in) 4x 10mm M3 caps like the original creator suggested. I also bought…
Remixed version to fit the magnets I had laying around. They are press fit and shouldn't need any glue.
A remix of rynn's humidity sensor mount adapted for 8x2mm magnets. Magnets are also not captive in this version.
NO SUPPORT REQUIRED We’re thrilled to announce that our latest creation, the 3D printed cat skull magnet, is now available! This unique magnet can be enhanced with glow-in-the-dark filament for an even more striking appearance. For the…
Format: Length: 40mm Width: 20mm Height: 5.5mm Recommended text height: 2mm Required magnet size: 8mm by 2mm Placing the text: The text can be placed with any slicer but you find examples in the .3mf file. If you want the text to be on…
8x2mm Magnet Tolerance Test, Test in sizes ranging from 8.1mm to 8.25mm to find out which one fits best.
Just changed the holes to support 8x2mm magnets instead. (Only the Front, Back and Side parts). Magnets are press fit into place. Also added the little washers I used for the bolts.
The 8x2mm magnets needs to be glued in place. Only did the change for the side covers.
Printed in PETG (no support was needed) 15% cubic infill 0.2mm height i used 8 8x2mm magnets (make sure the poles are facing the correct direction before you push them in) 4x 10mm M3 caps like the original creator suggested. I also bought…
Remixed version to fit the magnets I had laying around. They are press fit and shouldn't need any glue.
A remix of rynn's humidity sensor mount adapted for 8x2mm magnets. Magnets are also not captive in this version.
