766 modeli
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Stable stand inspired by MacBook Air M1 shapes, holes on the bottom for self-adhesive 8mm non-slip pads. Optimal for charging and storing your MacBook if you want to save space on your desk. Printed with 4 perimeters (if you want to save…
Wydruk około 8,02 €–9,80 € nettoWstępna wycena jednego wariantu
Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…
Wydruk około 0,27 €–0,32 € nettoWstępna wycena jednego wariantu
Requires supports, do not scale it (the laptop don't fit in that case), 40% fill. 31/12/2023 - Updated Stl, Gcode and 3mf files. Added Step file.
Wydruk około 10,40 €–12,71 € nettoWstępna wycena jednego wariantu
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
The stand does not interfere with working on a laptop. project with space for slip rubbers. Can be used with laptop case. Sugestion: Infill: 10-15% Honeycomb without top space on sides Inspired by…
Wydruk około 8,95 €–10,94 € nettoWstępna wycena jednego wariantu
Simple angled laptop stand for my Macbook Pro. Wanted a sharper angle to take up less deskroom. Will likely support other laptops -- the gap between vertical supports is 17mm. Inspired by this design but rebuilt in Tinkercad. I wanted to…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
This is a Jig to help you fix the FlexGate issue on Macbook Pro version 2016 and 2017. The new cable will be 4mm longer and there is a line to help with the cut at the right lenght. It is highly inspired from…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Printed originally on Alfawise U30, that's why it's so ugly ;) I wanted to keep my Macbook charger under the desk so it won't be on the floor. At a same time I wanted it to be easily accessible - so I came up with this design. It's…
Wydruk około 6,00 €–7,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The legendary "Advanced Combat Blade model 90" from Battlefield 3 & 4. I designed it for a friend, who used this knife as his favourite weapon in BF3 & BF4. Our clan affectionately calls this knife “Teppichmesser” which means “box…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
This is a simple pressure that requires supports (optimally with organic supports). In addition to the STEP, I also include the 3MF and gcode files that I used to print the files shown in the images on my Prusa MK3s+. The design is ideal…
Wydruk około 8,98 €–10,97 € nettoWstępna wycena jednego wariantu
I have designed a stand specifically for the Apple Air M1 screen, providing a secure holder for the iPhone 14. Additionally, this versatile stand can also be used as a screen cover for the built-in camera. Two models are included : one…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
This is a desk stand for the “TouchBar” generation of MacBook Pros to run them in clamshell mode (i.e. with closed display). This should fit any 13" and 15" MacBook Pro with TouchBar (including the M1/M2 13" models). It will definitely…
Wydruk około 6,86 €–8,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Simple stand for Macbook pro 15" 2017. You may be able to use it for other models. the feet on the back should prevent any tip-overs if you use it for a smaller laptop that leans a bit. Added lightening holes to reduce material usage.…
Wydruk około 10,47 €–12,80 € nettoWstępna wycena jednego wariantu
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
Wydruk około 4,56 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made this to fit my 2020 MacBookPro to help keep the USB-C ports clean.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
The second thing I've ever made. Custom-made to hang the charger with cables on the IKEA Lillåsen desk. *update: a more solid V2 Printing instructions Print on its side with supports. Layer height: 0.3 mm Infill: 20% or more
Wydruk około 5,92 €–7,23 € nettoWstępna wycena jednego wariantu
iPad holder for the Ikea KNARREVIK bedside table inspired by @roofuskit_86325 Use the 4xM5 original screws The iPad used here is the iPad Air 4th 11.9 inch screen with an ESR case The Macbook used here is the 13 inch Macbook Pro 2015…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
Das 140W Netzteil kann mit dieser Halterung ohne Werkzeug heraus genommen werden und ist nicht fest verbaut. Einfache Montage mit 4 Schrauben 3x16 mm mit Senkkopf. The 140W power supply can be removed from this bracket without tools and…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
A laptop stand for use with an external mouse/keyboard. Featuring: Better video call angles (no more double chin!) Line it up with an external monitor Space for one of those clicky clacky keyboards underneath Tip it down for “almost…
Vertical stand for MacBook with holes for ventilation. I found giahuy2201 's model but I noticed that it was missing holes for ventilation. So I added holes on one side for better ventilation and hole design matching the entire piece.…
A stand to hold the laptop at an angle, so the display is in line with an external display. Print instructions I printed this with 0.2mm height and 15% infill, and it seems strong enough.
Model is inspired by https://www.printables.com/model/124247-macbook-air-m1-2020-stand Changes from original model: changed vertical slot to hold m1 pro without tilting slightly increased height and with added fillets UPD: added small…
Stand for MacBook Pro 2021 14 / 16 (M1 Pro, Max ) Upon looking at the sizes for the M2 MacBook Pros, this stand should still work, though I don't have a computer to test it. Printed in PLA 0.2mm Layer height 10% cubic infill No supports…
I wanted a simple/lightweight cable management solution for my charger. It's inspired by this model from thingiverse, but was designed from scratch. I've included the step and f3d files so you can make any needed changes if you've got a…
Simple stand for the M1 MacBook Pro. It'd work with any of the newer M models and the MacBook Air too too. The max thickness it'll fit is 19mm. I recommend printing it with supports and rotating the model 10 degrees on its base. This way,…
Hi, I designed a desktop stand for your MacBook, when using a monitor. fits: MacBook Pro 14” MacBook Pro 13" 2016-2021 Should fit the Macbook 16” if it fit the 14” -Settings recomendations: -Print with PLA/PETG, minimum 3 perimeters. -30%…
This is an under-desk mount which I originally made for the MacBook Pro M2 but can cater to a wide range of laptops up to 18mm in thickness. The width of the laptop is self-adjustable by the distance you screw the mount to be. It provides…
A generic laptop stand I made for my MacBook Pro 13" (2015) Pretty sturdy Single easy print, without any supports. Laptop-stand-20mm.STL Fits upto 20mm laptop My laptop is approx 18mm thick. So the stand is designed with a space of 20mm…
Elevate your office space with this stylish and functional 3D-printed MacBook Air stand, expertly crafted for all 13'' MacBook Air and Pro models. To ensure your laptop's protection from scratches, I recommend applying sticky-back foam to…
This model is a modified version of the vertical stand for the 2016 MacBook found on ThingiVerse: https://www.thingiverse.com/thing:2130027 It has been adapted for the new 14" MacBook released in 2021. The slot matches the curvature of…
this is a simple stand of macbook pro. Print instructions PLA, 14g, 35minutes with 0.3mm slice pitch.
After using JannesV laptop stand for several years with an older 2017 Macbook Pro, I decided to upgrade the design more to my liking from scratch in Fusion360. The changes are minor, but some things like the lips to prevent the front of…
🧬 Voronoi MacBook Vertical Dock — Modernes 3D-Print Design Dieses einzigartige vertikale Laptop-Dock kombiniert funktionale Eleganz mit organischem Voronoi-Design. Entwickelt für moderne Schreibtische und Apple-Setups, bietet es eine…
Hi, there are many laptop stands out there, this is my take on it. It is printable on a Prusa Mini (you will have to print all parts seperately). Can be printed with standard PLA, 0.4mm nozzle and 0.2 mm layer height and of course no…
The new 2022 Apple MacBook Air using the M2 chips now come with the MagSafe connector for charging your device. We all know the “issues” with these cables - over time they break where the cable meets the connector. We also know how…
This cable organizer is designed specifically for the Apple MAC M2 notebook computer charger with a capacity of 96W. It is made with precise measurements to ensure the safety of your cables. The organizer features two-directional…
This is a remix from Ammar Faridi's stand (https://www.prusaprinters.org/prints/117524-macbook-pro-2021-stand), resized for MacBook Air M1 2020. There is a clearance between the stand and the computer. You can either encase your computer…
Compatibility : Vertical Stand for MacBook Air / Pro with a thickness of up to 16.5 mm (17.5mm). Tested with MacBook Air 13" (2020, M1 and 2022, M2). Should work with any Laptop with a thickness of less than 16.5 mm. This includes MacBook…
16 inch (M1/M2/M3) Macbook Pro Vertical Holder/Stand Perfectly fit 16inch Apple silicon Macbook Pro Slot Width: 1.68cm Print Tested With Bambu P1S, PETG Edit 2024-04-09: Added v2 version with more curve, also added a model with 1.7cm slot…
Sufficiently compact to be maneuvered within the notch, whether in an open or closed state. CAUTION: Please remove the camera cover when closing the lid on your Mac to avoid screen damage. It is not recommended to use a camera cover on a…
Update 15 Sept 2023 - On Request I added another model version for 16" MBP (16.8mm thick so made the gap 16.939mm wide) I really quick model created for my office desk. I have dual monitors and wanted a stand for my MacBook Pro to have it…
An iPhone continuity camera mount designed to fit the iPhone 12 to 14 while in its protective case. This mount can be easily hung on a MacBook 13", 14", or 16", however, it fits best on Apple Silicone MacBook 14 or 16 inch. The mount has…
Description I wanted something that could elevate my MacBook Pro 13" while letting me close the lid. Many other “elevators” hooked onto the sides of the laptop, preventing the screen from closing. Version 1 : a simple rounded bar, width…
After using a few sub-$100 usb c docks with my MacBook Pro (M1), I could not for the life of me get them to work correctly. I always had to plug / unplug multiple times, etc to get my external monitor to display anything. I don't wanna…
I've wanted to mount my MacBook under my desk and this is what I came up with for it. Locks into place once you connect one of the USB-C Ports closest to the touchpad. Leaves enough space for ventilation and due to its small size is not…
Simple stand for a M2 Macbook Air. Prints without supports. I used PETG, 0.2mm layer height, 0.4mm nozzle. After printing, add some thin (1mm) self-adhesive foam tape to the inside for a snug fit and to protect your Macbook from…
A simple and elegant temporary camera cover for your MacBook. Tested to fit on the 2020 MacBook Pro. Does not fit on the newer Apple Silicon MacBook Pros. Print it in black for stealthiness or with bright colors for a constant reminder…
There's a version for 14 inch and another one for 16 as they have slightly different thicknesses. I would recommend to print it with the profile flat on the bed to maximise the strength of the print ! Maybe add a 4mm brim in case.
thanks for the great original, i increased the size of the base for a better stand. Beschreibung This is an stand for an laptop iPad and an e-book with all hexagonal pattern. If you want to modify it to fit perfectly on your devices…
I designed this setup because all of the Vesa laptop mounts were too large and boring. I also wanted to find a way to better way to use my USB-C hub without it dangling in mid-air. I also designed thick-style knob washers to make it a…
This is a 3 part assembly. you print 2 clones copies of the stand and 1 of the spacers. They are a pressure fit and do not require any hardware to assemble. I printed it out of Matte grey PLA. 0.4 nozzle, 0.2 layer height, solid no infill.
This is the 4th revision of my MacBook Pro M1/M2/M3 Pro/Max 13"/14"/16" stand. Now 1 degree further back-tilted (and new text). Pro-tip : Small macbook pros and all macbook airs need felt pads for a snug fit. Add the pads on the back of…
This is an stand for an three macbook like laptops as hexagonal pattern. Infill as max as you can for the durability! Developed for the height layer - .2mm
MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free September 29, 2024 Update: Added Cable Organizer compatible with thicker 4,5mm diameter braided cable. Product Description: The MacBook Pro cable organizer clip is a…
Mounting for my MacBook Pro 13" on the IKEA Skadis. My it will fit to other Notebooks. The Gap ist 19mm.
I created this box to be able to store the charger for my 13-inch MacBook pro. I was tired of finding the charger and cable at the bottom of my bag in bulk! I searched on the internet for something that would meet my expectations, but I…
This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…
Printed on a Prusa Mini with a 0.6mm nozzle using Sunlu PLA+ filament, compatible with a MacBook Pro M1 16 inch. New Version: LaptopStandGoldenTriangle – Now with a 36-Degree Angle The new 36-degree angle option has been meticulously…
Designed as vertical stand for holding a MacBook Pro. Pictured is my 17" 2011 unibody MBP. Plenty of clearance for ventilation and the 2011 MagSafe cable. The slot is 26mm wide. I am the original designer of the Elegant Arch. I've moved…
Simple Clip for USB-C to Magsafe textile cables with 3.6mm diameter to wrap the cable around you power adapter Print the file in given orientation, may you should print more than one to prevent overheating (small part) or use the attached…
My MacBook Pro 16 sat for long periods unmoved as a desktop replacement. It took space and dusk like a champ. A few weeks ago, I decided to store it away under my desk, which decluttered my workspace significantly. Most of the "under…
Tired of the cable chaos? We've got you covered! Introducing the Cable Wrapper, a sleek solution designed to keep your charging cables neat and tidy. Say goodbye to tangled wires and messy bag! How It Works Simply stick the Cable Wrapper…
Vertical laptop stand in different sizes. Please measure the thickness of your laptop, add less than 1mm margin and choose the right size for your computer. Below I have a list of examples of laptops I could test: 12mm gap, fits a Macbook…
Instructions: Print parts 0.2mm, 3 walls, supports from build plate only Purchase this exact L shaped USB-C adapter: https://www.amazon.com/dp/B0C5ZRYD3J?psc=1&ref=ppx_yo2ov_dt_b_product_detail The dock can be any USB-C dock. I prefer the…
Have you ever wanted to attach your iPhone 6/6S/7/8/SE2020/SE2022 to a laptop or Macbook? Then this is the right 3D model for you. For Continuity Camera, Camo app and other webcam phone utilities. No MagSafe needed and compatible with…
In most MacBook Pro models, the keyboard is part of the cooling system. Keyboard covers can block the airflow and (potentially) cause the laptop to overheat. This remix improves the air flow by: Raising the height of the legs by 1mm…
This model is a remix to fit different MacBook models. MacBook slot is designed to fit all the models with M2 Air form (M2 models and newer), also it has extra space if you use cover case with your Mac. iPad slot fits iPad Pro 11'' with…
I've build a laptop stand because I think my mousepad leads to insane fan speeds. And somehow I guess it worked :D Your laptop can be 18mm thick Dimensions are 120mmx34mmx50mm (wxdxh) Printed in Black GEETECH PLA 15% Infill On a Bambulab…
The holder clips securely and snugly into the slot and onto the sides of the monitor's stand. There are vent holes for airflow, but I recommend you orient your computer such that the computer's vents are upward in free air. The holder's…
4 slot remix of Hex version of @AdrianVidal laptop charging stand.
Minimalistic vertical stand for Macbook Air (M1). Weight about 50g with Bambu Studio default settings (0.28mm layer height), printing time 1h 25min.
Actually the model was made from scratch, but since it's heavily inspired by the model made by @seanbeaton_354300 , I decided to mark it as a remix. It was made to fit the A2518 67W power adapter shipped with M1 and M2 Macbooks. The inner…
This easy to use MacBook Air stand is designed to create more space on your workplace. The MacBook stands at a 44° angle on your desk, which allows the continued use of the MacBook and yet leaves more space on your desk. The stand is…
If you wish to hang your MacBook or any other laptop on the wall with the help of Ikea Skadis system like me, then this is the must-have accessory. This bracket helps you to hang a laptop onto your Ikea Skadis board, with no waggling in…
A vertical stand for your 2019 (and perhaps later) MacBook Pro Print Settings Printer: Voxelab Aquila Rafts: No Supports: Yes Resolution: .2 mm Infill: 15% Filament: Voxelab PLA Blue How I Designed This Intro This is a remix however I can…
This is a stand for laptops, iPads and Macbooks. You can download the .f3d file to customize the stand for your fits. 1. Open the file in Fusion360 2. Go to Modify > change parameters 3. Measure the widht of your devices 4. Change the…
Slightly modified version of therefore3d 's model. As originally stated by him: The long leg goes towards the screen of your computer, nudged up against it. Inspired by any number of designs, but I aimed to make it more stable than I…
Remix of PlasticBarista's Universal Macbook / Laptop Vertical Stand, to accommodate three laptops.
Use your phone or tablet together with your laptop as a second screen. Can be stretched/shortened to fit laptops of different sizes. Print profiles included. Differences between versions: Macbook version - use this version if you have a…
Laptop stand for my XPS 15" Dell 9500 The inner gap for laptop is 21 mm wide and it just fits perfectly.
Remix of @formulagp46 MacBook Pro 2020 Dock to accommodate two MacBook Pros in vertical orientation. I've checked this with both Intel and M1 13" MacBook Pro 2020 and with my wife's Intel 15" MacBook Pro and they all fit nicely. Will…
This functional 3D-printed laptop stand is designed for the MacBook Pro 16-inch model. It features a separate piece that holds the cables in place, which is then inserted into the main body to lock them securely. This prevents the cables…
Macbook Halterung Die Macbook Halterung ist ein Nachbau der Twelve South Curve Ständer für MacBook. Diese habe ich angepasst, das sie auf einen Original Prusa 3D Drucker gedruckt werden kann.
Macbook Pro 16 Zoll Stand for you desk, you can use it open or closed
It doesn't require any special settings, I printed it in PETG at 0.2mm resolution. It will probably fail to work if printed with a higher diameter nozzle than 0.4mm because the lip that holds the lid might not be strong enough.
Hey this is a simple vertical stand i designed. there's also a version for the 2020 ROG G14 I added a little foam-pad in the bottom to lower the risk of damaging the laptop. Have Fun!
This is a laptop stand I made to hold my MacBook Pro and reduce the amount of space it takes up on my desk. It's intended to operate in “clamshell” mode with external monitors and accessories. The distance between prongs is 17mm wide. I…
A stand for a 16" 2019 Macbook Pro. It is stylish, sturdy and easy to print.
Mini Laptop but I edited the aspect ratio, the trackpad and the keyboard layout.
Specifically designed for 16" MacBook Pro 2021 Stand
This product is a stand specifically designed for Apple MacBook Pro M2. It effectively supports your laptop and helps keep your workspace clean. The stand is made for 3D printing using PLA material with 15% infill and no support needed.
I reduced the 96W version with 5.25mm. This might have been a tad much, so fits are tight. I've tried it with a .4 and .6 nozzle without issues.
The iPad Pro can make a great second screen for your MacBook Pro especially with Luna Display or the new Sidecar feature. Even without these it can be useful to have some additional real estate for podcasts, research, etc. I like to view…
Support pour MacBook Pro et ordinateur portable pour les imprimantes avec un petit plateau d’impression. Fait sur une Flashforge Créator Pro (232x154) Pas de vis, juste par emboitement MacBook Pro and laptop stand for printers with a…
