Liczymy pasujące modele…
Camera holder for RPi camera to be used with Prusalink. Compatible with: - Prusa MK3/MK3S/MK3S+ printer - Raspberry Pi Zero W / 2 - 15cm RPi Zero CSI camera cable (Zero has a narrower connector than the larger RPis) - Raspberry Pi camera…
The stock phone stand angles the display to reflect ceiling mounted lights, this taller stand reduces that glare.
This wall mount bracket for the Yealink T46G provides a 10 degree angled mount for any wall you can screw into. There are several channels and a couple of holes on each side of the mount to aid in cable routing as required.
PETG 0.2 mm layer height 15% infill 3 wall loops Manual tree support for clips
Warning! One user reported a crash between the camera and the extruder. This is a problem if you print big parts using the back/left part of the printer. Based on this report, I would recommend placing the camera away from the printing…
Brackets were found to be out of stock most places I looked an I couldn't get them in time for a project. This has been tested and is recommended to be printed in PETG for the slight flexability it gives the the notches. Some clean up to…
File this under “kids do the darnedest things…”. We had some of the kick stands/mounts on the back of our school district IP phones go missing or get broken. There was no way to purchase replacement parts, only to replace the entire…
This is a holder for GlobalLink Monitor Lamp for ikea skadis, so you can use it as light for workplace. The Lamp: https://www.amazon.de/gp/product/B08DHWZNRC/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I took the original raspberry pi 2W door for the Einsy case and added radii to the slots.
StardrawMegalink - Robotic drawing arm Introduction The project aims to create an experimental prototype of a drawing arm with a base. It is designed to test inverse kinematics. The software part is provided by a Micro:bit microcomputer…
I needed to locate my Signalink USB under my countertop so I made this bracket. I hope it comes in handy for any other Hams needing to mount their interface somewhere.
Needed a better way to store the Wireless Presentation Pod when not in use.
printed this in several orientation, best is to make it lay on the side that actually sticks to the phone, so the external parts look smooth. supports are needed its different from stock one because it uses upper AND lower hinges, while…
As PrusaLink/PrusaConnect now supports USB Webcams, I've remixed Prusa's Raspberry Pi Zero frame for Einsy Rambo model to provide some protection for Waveshare's Ethernet/USB Hub pHat. The Waveshare pHat comes with brass spacers and some…
The Behringer Ultralink microphones are thicker than a standard microphone. I needed to a bracket that fit them for the office, so I whipped these up in Fusion 360. The bracket should fit into a standard base and use any mounting hardware…
✨ Welcome to the iNap Malinka main page! ✨ iNap Malinka was mostly made as a decent Raspberry Pi based NRF24L01 transmitter. But as it turns out you can play some games on it as well! It's a small DIY handheld that runs RetroPie so any…
This mount allows installation of an Envisalink EV4 board in Vista alarm control cabinets. 2.5 mm holes for mounting the Envisalink board have been placed to allow the Ethernet jack to face right or left. The board can also be attached to…
I wanted to combine a front facing light and a cellphone webcam into one unit for use with Prusa Connect. The Stand/Phone: The phone holder sits at a 10 degree angle. The camera needs to sit about 30mm higher than the light to have a…
This model includes two versions: • One with a wide back surface, ideal for applying custom vinyl prints, logos, or other visual branding. • Another minimalist and discreet version, for a cleaner and more compact look. 🛠 Note: The model…
Sides and middle plates separately. Unfortunately I had some bad luck with tolerances in the slots where middle plates are pushed. Had to do some trimming with an exact-o-knife. Also I made a little measuring error so I had to print…
Used this to prank a coworker. Can be modified to fit any top desired. Printed in translucent PLA
I designed this to free up some desk space. It behaves like a wall mount, but remains on the desk - useful for when wall mounting is not feasible, such as on an adjustable height desk. Designed for the T53W, but should fit most phones…
pdated version of the RPi Zero Frame to protect the Waveshare Ethernet/USB Hub pHat for Webcam usage with PrusaLink.
Change the color of your base station's SignaLink USB with this slip-on cover. Fusion 360 file included. Print Settings Printer: Prusa Mini+ Rafts: No Supports: No Resolution: .20 Filament: Hatchbox PLA Black Category: Electronics
Today the head protector of the headset I use at work is broken. Here is a replacement. To secure it, I simply heated the headband.
This is a Raspberry Pi Zero Cover for the MK3 that includes a mounting point for the Adafruit CSI/DSI cable extender. Note: since the cover will no longer flex, it is a bit trickier to get into place, you'll want to insert the top two…
I designed this to free up some desk space. It behaves like a wall mount, but remains on the desk - useful for when wall mounting is not feasible, such as on an adjustable height desk. Designed for the T43U, but should fit most phones…
Hi, I've assembled and remixed the above model to make a Yealink headphone stand, that can charge the headphones and my mobile phone. Many thanks to: Markus - @Markus710 markusdoesthings - @markusdoesth_1591754 Vinark - @Vinark For the…
Fusion360 files included. This is a parametric U-hook for the outdoor security camera Extralink Perun EOC-268.
This is my first 3D model, designed for the company I work for. It’s a custom holder for the Yealink MeetingBoard 65", created to securely mount the wireless microphone and charger onto the official floor stand. The model focuses on clean…
I wasn't a big fan of the stand that Yealink makes, so I made my own. This will hold both caps of the Bh76 plus headset aligning one ear with the wireless charger. There is space for the microphone on both sides so it can hold the headset…
These power station die often, the battery is reusable. The BMS mounts in place of the inverter. I used 4 x M3x3.5x4.6x6 threaded inserts.
YeaLink MSpeech AI Microphone Wallmount
Das ist eine Halterung um die Yealink Speaker II an einem Samsung 85 Zoll zum Montieren. Diese werden links und Recht Monitert
Hier findet ihr eine Halterung für ein Yealink CM20 Deckenmikrofon mit außenliegendem M22 Gewinde. Auf diese Halterung kann das Mikro direkt aufgeschraubt werden und das Netzwerkkabel hat im Inneren genügend Platz. So spart man sich die…
I have a client who has a new phone system at work. The lights in the office shines glare on a digital readout of the new phones. In Fusion 360 I made a model and 3 D Printer out some feet. With the new feet it changes the angle of the…
Made custom mounts for the new phones in our office. Please adjust your orientation as required. Model: Yealink MP54E2
An alternative non-charging wall mount for Yealink AX83H wireless VOIP phone. It comes with a wall-mountable charger, but it's not great to have a Li-ion battery on a charge 24/7, so I installed this next to the wall charger. Screws into…
This is a preheat file. It does not contain a model, it does not perform actual printing! It just heats the head to 175 celsius and the bed to 85 celsius. When it is done it beeps and keeps it warm and waits for the next print. The gcode…
Yealink Desk Phone T7 Series Universal Stand I designed this stand because Yealink's official "low" stand still holds the phone at a 40° angle, too steep for my liking. This version lowers the phone to a 30° angle, which sits much better…
Made custom mounts for the new phones in our office. Please adjust your orientation as required. Model: Yealink MP54E2
An alternative non-charging wall mount for Yealink AX83H wireless VOIP phone. It comes with a wall-mountable charger, but it's not great to have a Li-ion battery on a charge 24/7, so I installed this next to the wall charger. Screws into…
You need to remove the rubber feets at the bottom so the stand can fit there. Also use hot glue to the stand points to make it even stronger. Use double sided tape to secure the mount to the wall, router is not that heavy no need for…
