48 modeli
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Gusset for repairing Volantex TrainStar motor wall. If you broke it in this place , just print this gusset and glue it with CA glue! If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
FPV canopy for Volantex Ranger 2400 and Volantex Phoenix 2400. With 9g servo mount and designed to house DJI O3 air unit. It will also work with any other VTX since you can use zipties to mount VTX in place. This is a rough first version,…
This is a basic model for Volantex Ranger 2400 and Volantex Phoenix 2400 canopies. It is my attempt to reproduce stock canopy form. This model is not suitable for printing as is - instead, use it to make your very own canopy! I keep this…
I've designed this tray to completely replace the stock, plywood one. It lets you balance and fly the plane with much larger batteries. You're gonna have to remove the wheel and the wheel cowling though. However, it pairs nicely with a…
This is my attempt to recreate vertical stabilizer of Volantex Phoenix 2400 (Should fit Volantex Ranger 2400 too). You can print this if you want. Use filament piece for stab axis, glue some parts together with CA glue.
This FC plate replaces stock wooden plate and mounts Matek H743 Flight controller, its USB extender, optional buzzer, and two wing connectors like these . Lots of holes for cable routing using zipties. Been flying this for a year, works…
Propeller spinner cap for popular RC aircraft Volantex TrainStar in equal scale with side bolts mounting. No supports needed. For 6mm shaft Equal scale If you like it, please support me: Paypal: [email protected] Skrill:…
Info This part is a direct replacement for the flimsy tail bracket for a Volantex Phoenix 2400/2000. The 2400/2000 share the same body, so it should fit both. Print Tips It is recommended to print it as oriented (upside down with respect…
Mounts for Walksnail VTX's specifically the Avatar HD v2. The camera mount fits both the standard and Pro and possibly the Moonlight camera. I have three camera mounts, only difference is the servo head alignment, hopefully one of them…
modelo reforzado para helice Volantex_Phoenix_propeller
I broke my Phoenix 2000 battery floor... too much fragile IMHO ! Here is a light version 3D printed. To fix it, position the floor in place, then drill a 1mm hole for each screw. And that's it Doesn't add weight to the nose. CG is…
With a small cut, can be fitted to rudder. Printed in TPU Perfect 3rd Person View I personally have put in some carbon tubes for air flow to the unit, as well as a tube for the antenna.
The original motor mount for Volantex aircraft is crap, as any collision motor first cuts it clean off the rest of the fuselage. This motor mount replaces the entire nose section, providing strong support of the motor and better cooling.…
This is a four way 2g server horn, specifically designed for the Volantex RC Spitfire . I included the original fusion file as well.
This is a custom motor mount designed specifically for Sunnysky x3120, although i guess it will also fit any other sunnysky motor. This is intended to be used with stock metal plate & screws so you dont need to drill anything. Note that…
Ich habe für die Modster / Volantex ASW28 V2 einen halter für die Caddx Vista entworfen. Er sollte am besten aus PETG gedruckt werden, Support wird bei beiden Dateien benötigt, allerdings nur vom Druckbett aus, je nach Slicer könnt ihr…
This motor mount was created to be easy to print and mount. After printing, scratch the outer 1mm of the print, apply hot glue and stick in the nose of the aircraft. It has been tested with the t-motor 2814 and 2820 motors. make sure to…
Simple, but very usefull if you have lost one of the original canopy mounts (as me) ;-) Category: R/C Vehicles
wings lock must be printed in vertical orientation with 3 supports:
This wall mount doesn't hold it whole - the plane has to be nose down on the floor. Snap the tail in, glue it to the wall, when glue sets in pull the tail out. Print instructions Category: R/C Vehicles Summary This wall mount doesn't hold…
20250531UPDATE: Sand the upper part of the rear bump a little if fitting difficulty is encountered. INTRODUCTION Basically, a wingtip, and a shorter one compared to the kit. Out of my unwillingness of finding places for the thick ones…
I work away a bit and was bored of stabbing myself on the loose Soldering iron tips. Printed in ABS at 0.2MM layer height no supports.
the upper part also works with my base for the AtomRC swordfish: https://www.printables.com/de/model/977779-atomrc-swordfish-dji-o3-mount-v2 the upper parts are actually identical Requires at least 4 5x5x3/5x5x5 neodymium magnets for…
CANTEX Meshtastic Mounting Solution for a CANTEX 4"x4"x2" outdoor electrical box. This is specific to the RAK19007 WisBlock Base Board and DFRobot Solar Power Manager 5V. Home Depot: Cantex 4 in. x 4 in. x 2 in. Junction Box R5133705 -…
This is a replacement door for the Volantex Trainstar Ascent. The door is made to be very thin and light. If printed curved-side-down it should require no supports. You will need to use magnets or a pivoting catch to hold the rear.
A ground loop broke the wing clip so I made a replacement. Printed solid by having 4 wall parameters. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
printed in tpu, it is pretty strong
Battery Tray for Volantex ASW28 mounted further back above landing gear hole to help with CG. Add about 10g of weight. Space for both battery straps and velcro for battery fitment. Landing gear needs to be removed to be able to fit the…
Jantex loo/blue roll holder key.
Volantex Ranger 2000 Hobbywing Flyfun 40A ESC mount. ESC fixed by rubber ring from bicycle tube or nylon tie. See the pics and have a fun :) Print Settings Printer Brand: Prusa Printer: Prusa Clone **Supports:** Yes Infill: 60%…
replacement battery tray for the Volantex Phoenix S 1600. Uses 6x 2mm heatset inserts and 6x 2x8mm screws
My Volantex Saber had a close encounter with a concrete pole, which dented the leading edge of one of the wings. After a poor repair job, it started to stall earlier on that wing, which made acrobatics much harder. Instead of repairing it…
Wing mount for popular RC aircraft Volantex TrainStar for two MPX connectors. two wings center clamp two MPX connectors mounting for flaps/ailerons/lights bottom part with adjustable connecting length. Best fit! Installing the wing in one…
This is a wall mount I designed for the RC Volantex 500mm P51D. It's printed in 2 pieces and connected together by a single M3 screw. The large tab under the tail wheel support is meant to fit a 5lb command strip. Printed with PLA.
Rudder mount for popular RC aircraft Volantex TrainStar. If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★ Thank you! ★
Volantex Phoenix V1 (TW-742-III, 2m wingspan) is quite old but still used by lots of rc pilots - even with flight controllers and/or fpv equipment. A short time ago I had a look at my old but almost unused Phoenix and thought about…
This is a complete Gridfinity baseplate for the Giantex 5-Drawer Mobile Storage Cabinet with Wheels - Rolling Lateral Filing Under Desk Chest of Drawers, 19.5" x 16" x 25.5" Office Cabinet found on amazon. Here is an amazon affiliate link…
Motor mount Volantex TrainStar. Replace original plywood motor mount inside the body. Glue it with CA glue! If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★ Thank you! ★
Made to fit my 21700 4S2P Li-Ion battery , and utilise its dovetail to quickly mount it inside the fuselage. Flight time of that contraption is around 2 hours, and installation of battery takes a couple of seconds. Upper tray has…
Rudder in Volantex TrainStar is so overladed: horn and rear chasis. So I made this mod for unload this part Use 16mm RC hinge Glue it with CA glue! If you like it, please support me: Paypal: [email protected] Skrill:…
Wallmount for Volantex Racent Atomic 70CM brushless, scanned hull for better fitment and "lock-in" seating.
Replace part of the ruder for Volantex 757-4 Category: R/C Vehicles
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
My Volantex Saber had a close encounter with a concrete pole, which dented the leading edge of one of the wings. After a poor repair job, it started to stall earlier on that wing, which made acrobatics much harder. Instead of repairing it…
The original motor mount for Volantex aircraft is crap, as any collision motor first cuts it clean off the rest of the fuselage. This motor mount replaces the entire nose section, providing strong support of the motor and better cooling.…
I like to practise stunt flying with my sacrificial foamy and in doing so, many of the original accesories I had have been broken or lost, therefor I spent a bit of time remodeling them so I can reprint them as many times as I need, and…
