Baofeng 18650 battery pack
December 2025 Added a Klickfast version of v8 and a clip. These 2 were inspired by and work with the following models. https://www.printables.com/model/918737-klickfast-belt-dock and…
- Pobrania
- 525
- Polubienia
- 95
- Ocena
- 5
Liczymy pasujące modele…
December 2025 Added a Klickfast version of v8 and a clip. These 2 were inspired by and work with the following models. https://www.printables.com/model/918737-klickfast-belt-dock and…
This is a fixed belt clip for the Baofeng UV-9R radio that is compatible with MOLLE/PALS webbing. The original clip is a rotating design that isn't suitable for some applications . This clip snaps over the lanyard attachment on top and…
Handy holder for a portable radio. Suitable for older cars where you are not afraid to screw.
This is not a difficult print. The picture shows Ankermake PLA+ Matte Grey filament. I used 30% gyroid infill and my regular print settings.
BL-5 battery replacement to allow direct powering from a 7-8.4VDC power supply. I terminate mine in JST-XH and connect it to a bench supply. The print can be made without supports, except under the retaining clip at the very top. I use…
The UV-5R Radio is a fun item to have around… but it always seems to be falling over. This stand will help keep it upright and stable. The pocket has ribs that engage the battery slots nicely to hold it snugly. You can use 2-sided tape if…
Модель предназначена от случайного нажатия кнопок. Стандартные винты заменить на M2.5x12.
Printed in PETG without supports or brim, using 0.4mm nozzle, 0.2 mm layer height and Prusament PETG profile in PrusaSlicer. Original designs attributed to Ghostguy6 and ddkaufman.
Baofeng UV-5R case ---------------------------------- This is a case for the Baofeng UV-5R which prevents from accidental buttons interaction while radio is in your pocket or a pouch. However all functionalities stay accessible to a more…
Side buttons protection cage for Baofeng UV-5R radio Allows you to avoid inadvertent push (bag, pocket, ...) Cage de protection des boutons latéraux pour radio Baofeng UV-5R Permet d'éviter des appuis par inadvertance (sac, poche, …)
This is designed to guard against accidental button presses or knob knobbings. Mounts using the existing belt clip hold on the back and keeps the ability to mount the belt clip over top. Retains access to all functions and buttons of the…
I have printed and installed this mods on my bao but no field tested yet Supports needed for guard part.
This model is remixed from https://www.thingiverse.com/thing:5270394 This is a small portable USB-C charger for the BaoFeng UV-5R and similar models that take the same BL-5 battery. I've tested this on the UV-5R and UV-5G. Note that…
The battery latch of one of my Bafeng UV5R broke. I looked on the internet for a 3d printed replacement, I only found a solution on Youtube, but the printed latch was far from functional. Therefore I designed a new one in order to better…
Here is my Baofeng UV-5R button and volume cover! I designed it with two flat faces for using your favorite slicer to add your name, group, and/or call sign. Two designs, one for the factory antenna and one with a 21mm diameter opening…
Hi folks, I was tired storing my three radios with accessories without box. So I made one. I added to parametric box with seal and handle my infill for three radios baofeng UV-5R with standard antenas, handsfree and other antenas. Is…
Cleaned up the AR152 exoskeleton design by Sigint Systems. Internal surfaces are now parametrically defined instead of a boolean subtract of a mesh. This means a cleaner file that needs fewer supports and support blockers to print cleanly.
Baofeng UV-5R wall mount. STEP included.
Just a new knob insert for Punkelopment's Protector.
I designed this to be a little more comfortable to hold the radio and not have any sharp edges on the printed piece, the antenna holding ring keeps the guard from flopping around which is a flaw of another design I saw and liked a lot.…
Just a Cup Holder thing for the UV-5R. I didn't like the versions offered here at all. that's why I developed my own. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 25%…
This PTT guard for the Baofeng UV-82 HAM Radio allows you to access the buttons by poking your finger through the holes, while preventing accidental activation while your ratio rattles around in a pouch. This is a very early version, but…
This is a remix of Lluís Llimargas’s “Support for Baofeng UV-5R Handheld Ham Radio” design, adapted to be compatible with the IKEA Skadis pegboard. Original design & files: https://www.thingiverse.com/thing:4728326
A Baofeng UV-5R Wall mount that uses the clip of the radio to hold onto the mount, attached to the wall with 2 to 4 screws Note: I do not recommend using adhesive tape, because the radio is heavy enough that it could pull down the mount…
Box to two Baofeng uv5r mini and usb cable. You will need six M3x30 screws to assemble it.
PRC-77/25 Baofeng case: This is the best and the most realistic replica of PRC-77 on the internet. Model is 1:1 copy of the legendary radio from the Vietnam war era. Model is primary design for airsoft/milsim events but you can also used…
Single piece clip designed for the UV-5R and other Baofeng radios.
universal baofeng UV-5R car mount
I designed this Baofeng UV-5R Radio Mount, this is a combo with all 3 models to use with your molle, belt, or Ram mount. What is included: You will get the RX2301 which is what you need to attach to the radio. You will also get the RB2301…
Mounted on dash with VHB tape Post-Printing Mounting Mount with VHB tape Category: Automotive
A sturdy mount to clamp around bike handlebars which has a loop to put the clip of your Baofeng radio.
I made a simple clip-in volume knob cover for my Baofeng UV-5R, so that it wouldn't turn on when carrying it around. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.15…
I have a few uv5r radios and always found them to be falling over, and generally disorganized. I like my bench to be tidy so I modelled this tray which will hold a charger, and a radio. You can take your radio out of it's charger when…
Baofeng UV-5R Wall-Mount Printed on Ender 3 v3 SE .2mm layer 15% infill Normal supports Screws: 4mm hole
I mount my radio inside the Admin pouch of my chest rig accidental activation of the PTT or changing the volume on accident is annoying, this guard prevents that. Design reuses the mounting holes and screws for the belt clip on the rear.…
Needed a place to keep all of my 4 Baofeng radios where they wouldn't get knocked over and lost.
Needed a holder to mount my baofeng to my boat so i made this. Can be mounted vertically and horizontally, can be charged while mounted if you have USB-C outlet on the battery. I made a couple different versions if you have multiple. If…
To standardise all my equipment, I wanted my new Baofeng UV-5RH radio to have a Klickfast stud, so I fired up the 3d printer and printed out the Klickfast for Baofeng UV-5R by Hoopajoo on Thingiverse (…
Volume cover for Baofeng UV-5R using rear clip mount and screws supplied with the radio
I used: 1x 2-slot 18650 holder - AMAZON BUY 2x 5x5mm copper pad made of copper sheet (you can use brass sheet too) few wires soldering iron I connected two 18650 cells to get 7,4V required to power UV-5R. You can use any 7,4V battery you…
Cover for Baofeng series of radios to prevent hot mic and accidental volume adjustments. To be printed in TPU or other flexible filament. The cover is attached by unscrewing the antenna, adding the cover, and screwing the antenna back on.…
Well, why a replica? Because I like it, but I don't like the plastic feeling. So I printed it with rubber filament. Unbreakable and much more pleasant to the touch. [EDIT 03/15/2019] GT-3TP type added. Due to very fine knurling, it is…
Designed to keep from accidental volume changes without completely covering the knob.
I have seen others like this but nothing worked like I wanted. This will protect the PTT & Volume from unwanted activation & adjustments. Great if you need the radio to be in a pouch or pocket.
Parts Needed: - Baofeng BF888S UHF HT - Heltec V3 - M3 x 30mm Allen screws and nuts - Some soldering required
Hi folks, I was tired storing my three radios with accessories without box. So I made one - https://www.printables.com/cs/model/801544-baofeng-uv-5r-box And now I made box for three chargers for this radios. I added to parametric box with…
[Newest Antenna design from MiaouCat] THE JUNGLE ANTENNA easy to assemble and extremely versatile. using calculators online you can tailor this to any frequency of your liking and get a nice Vertical GP antenna for a few dollars. the most…
A cage for your Baofeng, but better! Its a pretty simple design. The cage is designed to protect the PTT button and volume knob from accidental bumps. It also is designed to locate your fingers on the PTT / volume even when you cant see…
Needed a holster for the Baofeng UV-5R so I could mount it to my motorcycle. Designed in Fusion360, If anyone wants the .f3d file let me know! The model comes in laying down but I found it best to print standing up. I used 5 walls to add…
Who has one of these Radio devices knows how easily you can loose the knob. I was using the device without a knob for almost a year, until i designed this knob. Enjoy! Print Settings Printer: GeeeTech I3 pro B Rafts: No Supports: No…
wider and higher construction. Better hiding buttons and volume wheel.
This is a protection module for the Baofeng UV-5R. It's intent is to cover the transmit button and volume knobs so it can be put in a bag. (The software keypad lock handles the front buttons). I use this when rock climbing. There is also…
An upgraded go-pro compatible holder for the UV5R radios. There is an added slot for better belt clip retention to help prevent movement under off-roading conditions. It also significantly helps reduce noise from the radio rattling around…
Remixed from here: www.thingiverse.com/thing:4779643 A simple remix to use 9 volt battery in your Baofeng UV5r. You will need a 9v battery, a 9v battery connector, and to solder some leads and pads for the top of the case to connect to…
https://www.thingiverse.com/thing:4020257 https://www.thingiverse.com/thing:3237604
Konstruiert für die linke Fahrerseite eines aktuellen Ducato 2022 zum ankleben mit NanoTape. Gedruckt habe ich es hochkant mit Stützstrukturen in ASA. Im Ducato kann es im Sommer recht warm werden. Anklebt habe ich es mit handelsüblichen…
Replacement knob for Baofeng UV82 HP Filament: PLA, PETG Layer height: 0,15mm
Wall mount for Baofeng UV17 Pro GPS, fits all UV17 models. Has a compartment on the back for extra battery. Included Fusion file, in case if you want to tinker with it.
Basically a remix of regsix7's model for a UV-5R cupholder I found on Thingiverse . This will fit the new BAOFENG AR-5RM. Just slide the belt clip into the top and it clicks into place. Should fit most cupholders nicely. Still can work as…
This is a stand / hanger to hold a Baofeng UV-82C with external mic attachment. I designed this to work with a FITS slot attached to an adapter that fits in the cubby hole on the dash. I printed this on a Creality Ender 3 with eSUN PETG…
Baofeng UV-82 stand holder Print Settings Printer Brand: Anycubic Printer: Kossel Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: C-tech PLA Black Post-Printing ============= Category: Mobile Phone
Baofeng uv-5r dust cover for mic/headphone plug Flexible Bridge Avoid printing it alongside the bend: Should be angled ether perpendicular or 45° angled to bend: There are 2 options: 1- Set support top z distance to 0 and it will ignore…
A company I work with have replaced all their radios with Baofeng BF-888 models, and they wanted to switch over to Klickfast studs to maintain compatability with standard UK ambulance uniforms (which generally come with klickfast docks…
A quick holster for the BTECH / Baofeng UV-PRO. Belt clip locks radio into holster. Access to USB-C charging port on rear.
Belt clip for the Baofeng UV-9R Plus. Use the original screw (2.4x10mm?) from the old clip to fasten. The battery can still be replaced :) Print Settings Printer: Artillery Sidewinder X1 Rafts: Yes Supports: No Resolution: 0.2mm Infill:…
This model was shared with me as a nice way to hang your Baofeng radios, or more specifically for me, your Meshtastic devices that have Baofeng clips (like those from https://www.printables.com/@AlleyCat) from the dash of your vehicle. I…
Printed on PETG 0.2mm with 6 wall loops, min. 1mm bottom/top shell and 60% gyroid infill.
Needed a case to keep my Baofeng UV-5R and BF-F8 radios from being damaged while tossed in random places during trips. The Baofeng logo is just .01mm deep so you can fill it with a different color on a multi-material slicer if your…
I made this in fusion 360 a while back, Now with the changes I am exporting my models and getting rid of them. I did print this way back when I made it. Was going to make an 18650 pack but never did. Included the STEP file so you can do…
We are using the Baofeng BF-R5 portable two-way radio as communication in our Scout group Träkvista Sjöscoutkår , and I made a wall-hanging storage/charging station that holds 12 radios and two multi-output USB chargers. That meant that I…
use pet-g and 15-25% infill ,3 walls ad supports
Stand for UV-5R mini or GT-5R mini The clip can secure the device on the stand.
I finally decided to publish this model, since its way too cool for not being out there. Be warned up front: Its a complicated print. For the Part "BAOFENG_Akkuhalter", you need to print with supports, and select a full support interface…
I needed a place to store my Baofeng radios, and I did not have enough space te store it upright. So I made this. Paint on supports only needed for the wall hooks.
A remix of Transmit Blocker Baofeng Factory Screws By JULEZ_GERMANY except it allows you to press the black Monitor (MONI) Button because it does not transmit, it just activates the light on press and disables squelch when held down. It…
This is a cap for the side socket of Baofeng UV-5R. -------------------------------------------- Any thoughts and recommendations will be appreciated! ---------------------------------- If you like my work you can buy me a coffee . .
This is a simple, low profile, wall mountable tray designed to hold one BAOFENG CH-5R or AD-CH5R battery charger and a UV-5R radio while charging. A cord slot is provided to secure the power cable and keep it out of the way. The second…
Helps keep your UV-21 upright and in one piece. May also work for UV-17.
A volume knob cover to keep the volume from changing itself when worn in a puch or pocket. The original design was a bit too tight on the antenna I used and I felt the connecting arm was a bit weak as mine snapped of when pushed in place.…
https://cad.onshape.com/documents/70bb708aebb2f03bfd856baf/w/a0110bc7235dde8939ac835b/e/f3e49e0d1b2d5fdb489d0bdb I replaced the original screws with longer M2.5 x 10mm ones.
I have the same problem as most with the UV-5R. If you move the headset plug slightly, the radio will no longer work. There is already a solution for this here. However, I didn't like it because it is too bulky and you have to buy screws.…
I needed some simple belt pouches for Baofeng radios. These fit radios such as the UV-B5, BF-888S, etc. The "button" file is for a button that can be CA glued to the pouch front if you want to add a loop of elastic cord onto the belt loop…
Removed volume guard added PTT lockout 3 styles I found out that the AR-5RM models have a very touchy PTT and I couldn't find a suitable model to print so I modified this one edit 3/26/2026 Added 12 variations Added a cage and a full…
This is a gopro holster for a baofang radio and baofang radio with extended battery. I have tested it with the uv-5r and the br-f8 standard battery I have tested it with the uv-5r and the br-f8 extended battery used for my ATV and sxs…
After trying multiple encoder knobs for the UV5R, I found this to be a worth replacement, you might too!
This is a simple way to keep my extended antenna in my rig when not using it. I suggest using PETG, so the parts can take the heat. Category: Electronics
This mount is designed to securely hold two Baofeng UV-5R walkie-talkies on an IKEA SKADIS pegboard. It attaches to the walkie-talkies via their rear clips, providing a stable and convenient storage solution. The mount may also be…
My Baofeng UV-5R knob recently broke, so I decided to make a new one that is more ergonomic and durable. The new version has ribbed surface for better grip, better markings (that could be filled with colored enamel paint ;) ) and far more…
This is a battery case that allows you to use protected 18650 cells on Baofeng UV-17-Pro-GPS radio. !!! BEWARE !!! Use only protected 18650 cells. Instructions: I printed everything in PETG 0.15, 2 walls, 15% infill. Check the 3MF…
This is a tight fit cradle for Baofeng UV-5R radios with contact charging. You can install the charging contacts out of the charging cradle the radio comes with. You will need to solder the USB charging cable that also comes with the…
The ABBREE antenna has a 18mm diameter on the bottom that does not fit the UV 21 R at all. It screws on but looks terrible, and the weight of the big antenna surely doesn't help the connection point putting quite some stress on it when…
This will prevent the volume knob from accidentality being turned while you are carrying your radio.
Baofeng UV-5R Wall-Mount compatible with Button Guard print Printed on Ender 3 v3 SE .2mm layer 30% infill Supports Screws: 4mm hole
I printed this in ABS as PLA would wrap in the heat.
2x4 gridfinity organizer for the Baofeng UV-5G+, UV-5RM, AR-5RM, and BF-F8HP PRO radios *will not work with the antenna on the radio
UV-5R Upright Stand (90°) This 3D-printed stand is designed specifically for the Baofeng UV-5R and similar models. It holds the radio perfectly upright at a **90° angle**, keeping it stable, secure, and ready for quick access. Features -…