Liczymy pasujące modele…
Customized version of https://www.thingiverse.com/thing:16627 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options: teeth = 104 profile = 12 motor_shaft = 61…
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
Designed for the TPO 180 Ultrawide telescope, which is also called the Askar FMA180. It won't work with the new Pro version. Clamps around the reducer and the right position is at the back of that section. This give you more room for a…
Wydruk około 12,67 €–15,49 € nettoWstępna wycena jednego wariantu
I've created this nema 11 stepper motor mount for my ASKAR FRA 400 telescope. I give as well my dew shield for this scope. You have to found the adapter piece (coupling) 2.5mm to 4mm (stepper to focuser) as I've not designed myself.
Wydruk około 5,97 €–7,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanderer Astro Flat Panel V4-EC 125mm Askar SQA55 mount. The two halves of the clamp attach using two sets of M6 Screws and hex nuts The flat panel has slots for M3 nuts and M3x12mm Screws and attaches with four sets of these; two on…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 0.8 MOD gear 80T for Sharpstar Askar FMA180 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 40T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🇮🇶 مرحبا بك في العراق Welcome to Iraq This model was designed by Faiz Kamel @churnwalker21 Al-Askari Shrine , the ' Askariyya Shrine (Arabic: مرقد ٱلإمامين علي ٱلهادي وٱلحسن ٱلعسكري, Marqad al-ʾImāmayn ʿAlīy al-Hādī wal-Ḥasan al-ʿAskarīy…
I needed a place to mount my ZWO ASIAIR on my ZWO FF65 APO, same type as the Askar 65PHQ. The original CNC machined part is expensive and hard to get. Other 3D-printed alternatives were sold for exorbitant prices, so I started to design…
When using the Dew shield I used Black Velour Flocking see link to self adhere onto the inside for a smooth close connection. I printed the parts with CF PLA as I liked the dull black finish.…
Lifting pad / riser block with notches designed for the stock Vixen dovetail and rings on the Askar 71F Flat-Field telescope. Effectively raises the OTA by 7.4mm which provides enough clearance so that you can slide the dovetail under…
A simple rail that attaches to the tube rings of an Askar FRA400 refractor telescope. The rail mounts to the rings using M6 screws. The center holes are designed for 1/4-20 or M6 screws and hex nuts (11.5mm between flats) whereas the…
I designed this for my kid to play with. Having no clear references I tried to replicate what I have seen in images over the internet. Have fun.
Ring that holds the hood of an Askar FRA400 refractor telescope in the extended position. Requires a 10mm or longer M2 screw and hex nut. Without the screw, the ring is flexible enough to be passed over the hood.
Cable holder that mounts to the tube rings of an Askar FRA400 refractor telescope using M6 screws.
Bahtinov Mask for Askar 91F refractor. Sits in place of dust cap
Pla Nozzle:200 Bed:70 Supports:No 0.2mm
I introduce the Askar Universal Losmandy-Style Dovetail Full Plate Series. 200mm Completed 300mm Completed 400mm Completed 500mm (In Progress...if I can find a reliable diagram...) I have added a line of holes every 10mm on the dovetail…
This is a pair of filter cells (60 and 80mm) designed for shooting flats with the Askar V modular telescope system, using a piece of white paper as the medium. Simply print each of the filter cells, then use the insert ring as a template…
Print face down, no adjustments to model should be necessary unless your printer requires them.
Here's a link for the OnShape parametric version of the model. Although I've designed it for very specific equipment, you should be able to modify the OnShape file for similar use cases. (If you do want to use the included model with the…
Uses M6 screws and nuts to attach the pieces to each other and M3x60mm Screws and nuts to attach the flat panel to the mount. The M3 screws are screws through the motor base and the 3d printed base to the other side. V2: Increased the…
Stiff and simple mount for ZWO Focuser for Askar 600 astrograph.
A Bahtinov Mask for the ASKAR ACL200L astrophotography lens. I had tested and it works very well, I left a small gap so you can install some felt taper around the inside wall so as not to scratch your telescope. I don't have photos of the…
Compact and stiff mount to put a William Optics guide scope onto an Askar 600 astrograph.
Usage The plate has for purpose to hold in place cables on the FRA600 from Askar. It uses the finder's screw holes to stay in place. Since the FRA600 has only one finder spot, and plate is retained on one side only, but it doesn't affect…
EN This flat box is designed for the Askar 103APO telescope, using the Yoocpai LED panel (14 cm) It provides a uniform, diffused light source for capturing flat frames in astrophotography. The design is simple and efficient: the LED panel…
This project ist based on Dark Sky Geek's excellent ASCOM OAG design (https://github.com/jlecomte/ascom-oag-focuser). I redesigned the mechanical parts to better fit my astophotography setup and to make the build easier. To print the…
Uses appropriately long M6 Screws and nuts to mount it to your dovetail.
Vertically mount a Pegasus power box to Askar dovetail plate to the side of the OTA. Use M6 screws and nuts of appropriate length to attach it to the dovetail plate.
Cheapest way to shoot solar photos is with a solar eclipse filter. Having had a Celestron EclipSmart filter for a TravelScope 60 that I bought for the 2024 solar eclipse, I designed this adapter which slides onto the FMA135 tube as a dew…
Mount/bracket for Pegasusastro power box Advance 2 for ASKAR107phq telescope Use 4 M6x8 to mount on telescope Use 4 M3
The telescope lowers vertically onto two soft TPU strips that support its existing Vixen rail. There are no clamps, knobs or sliding dovetail connections—just place the telescope onto the base and lift it off when needed. Features Wide…
This model was developed to replace the Askar 91F fine focus knob. We have printed this in PC CF filament and managed to also screw the original setscrew in place with enough force for it to work perfectly instead of the original fine…
WARNING! In order to install the sleeve you will need to unscrew the focuser of the Askar 91F and disassemble the telescope. If you are not comfortable with the disassembly of your telescope please avoid installing the sleeve yourself and…
The Askar 91F dewshield performance sleeve lens cap is necessary to complete the performance sleeve upgrade. This cap can also work simply as a replacement lens cap for the Askar 91F if you lost yours as well. Askar 91F dewshield…
This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Uses appropriately long M6 Screws and nuts to mount it to your dovetail.
Vertically mount a Pegasus power box to Askar dovetail plate to the side of the OTA. Use M6 screws and nuts of appropriate length to attach it to the dovetail plate.
Wanderer Astro Flat Panel V4-EC 125mm Askar SQA55 mount. The two halves of the clamp attach using two sets of M6 Screws and hex nuts The flat panel has slots for M3 nuts and M3x12mm Screws and attaches with four sets of these; two on…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small covers for the commonly used (7/16" EU) threaded propane/butane camping canisters and stoves. Protects the threads from dust and dirt. Print with a small layer height of 0.08mm.
Halter für 300-500g Gaskartuschen für einen Enders Explorer Next Grill als Ersatz für den sperrigen originalen Halter. Neu gibt es eine 2. Version, die hat zusätzliche Rippen für bessere Stabilität. Ich habe aber immer noch die erste…
Halter für Gaskartuschen fürs Bikepacking. Praktisch um zusätzlichen Platz zu gewinnen. Kompatibel mit nahezu allen Gaskartuschen bis zu 450g (Primus, Decathlon, …) Zusätzlich wird ein Gurt benötigt, damit die Kartusche nicht klappert und…
Eine Kappe für eine Schraubgaskartusche mit 7⁄ 16″ Gewinde A cap for a screw-in gas cartridge with 7⁄ 16″ thread
Wer will schon die häßlichen Gaskartuschen sehen? Bei uns steht eine mit einer schicken Lampe (bezahlter Link) auf dem Tisch am Wohnmobil. Da will ich die blöde Kartusche nicht sehen. Ich habe die Kappe für diese Kartuschen erstellt…
Primus Gaskartuschenhalter für Camping, Vans, Wohnmobile, Caravan. Kann auf ein Holzbrett aufgeschraubt werden um die kleinen Kartuschen mit 11cm Durchmesser zu halten. Damit bei der Fahrt nix verrutscht.…
