3528 modeli
This is a fully functional RC excavator that takes advantage of the wonderous capabilties of 3D printers. It uses micro robotic development parts such as an ESP32 development board that can be programmed via the Arduino IDE, this model…
You know what time it is. It is a new dragon model time. Hi everyone. I'm P1lotz and I am a Danish student, and I like to make 3d models. I made a new articulated dragon, with inspiration from my dragon recorder (link:…
NEW print-in-place tracked excavator available here ! OR join my Printables club and get it FREE ! Introducing the print-in-place excavator! This is a challenging print if your settings are not refined. Test your overhangs, clearances,…
Lately, I’ve been experimenting with emergency whistles. Here’s my first attempt let me know what you think or what I could improve!
Print-in-place and Articulated Surprise Egg #4 - Tiny Excavator 'Making of' video: Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock…
Flexi-Conda and Brick-Flexi-Conda If you like it --> press like it :-) Remix of my own Brick-Flexi-Gator model. The brick studs have an diameter of 4.9mm and at the head 4.8mm. There is a fast test file to check how the bricks fit. Works…
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
je potřeba prolomit první vrstvu u čepele
After the first attempt I made this one louder and easyer to print.
Introducing the “VersaVault” – no-nonsense solution for your hardware storage needs. This stackable box is not only tough and easy to stack up to four levels high, but it's also designed for simplicity and scalability. Need more space? No…
I redesigned the handle to be more in line with the rest of the printer look. I centered it on the height of the door unlike the original which is centered on the height minus the cutout for the screen. I also added a version where you…
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Compatible with propeller shields: https://www.printables.com/pl/model/867950-dji-avata-2-propeller-shields Print with PLA , and secure with cable tie. 17.5 g each Note about left and right files: They are almost identical. After putting…
Pulled and converted the 3D model of the DJI avata 2. Very suitable to make mods or take dimensions!! Non printable at this moment due to complexity
V2 for more grip power!!! Designed to loop, grip, and cinch snugly, it’s perfect for bundling cords, attaching tags, clipping small items to your bag, or keeping gear neatly together. Unlike standard zip ties, it doesn’t lock…
Toy excavator with moving parts. I used 2mm aluminum tig rod as the pivots. Tooth picks or filament may also work depending on the scale. It will need supports on parts of the track base and at the end of the main arm, all included in the…
Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
I designed and printed this vase for my significant other. This model is about 164mm tall but the design lends itself well to be scaled to any size. I have included a stl file for vasemode printing. The model shown is slightly more…
Small excavator key chain made for the operators at work. After printing, the two parts will connect together with some even pressure and some rotating, try keep everything as straight as possible. looks good printed with the tracks black…
New and improved versions added Full versions are fixed! On the full versions, the ‘61’ goes to the front. On the quarters, any will fit on any corner.
Aus dem Remix von BanditFPVprints geremixt komplett umlaufend zusammengebaut mit Tinkercad. Ausdruck in TPU, Hält wie das Original auch ohne klebeband.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
A print in place model of a sausage dog with a keychain loop. Watch the sausage dog dangle from a keyring! The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down…
If you have any questions, complains, requests, or other comments, please let me know!
Update April 14, 2026: Added a newest tight v3 which has a tight grip on spool edges AND an ergonomically designed easy-insertion entry for the filament with a positive snap. This tight v3 should replace the prior 2 versions because it…
For 3D printing nerds, hobbyists, and modern naval enthusiasts alike! The result of a quick weekend project, this model was inspired by the famous 3D Benchy, along with a fun facebook game from my childhood. The Aquitaine class is the…
Compatible with bumper: https://www.printables.com/model/856904-dji-avata-2-bumpers Great for flying through the woods and using Turtle Mode on the grass. The shields look too short, but it's not a bug. It's a feature - guards stay in…
Hello, this is an RC Excavator. Its intended to provide a fun entry level way to get hands on experience with some simple electronic components commonly found in robotics but if that's not your style you can also control it with standard…
3 different hooks and rings for sliding into caravan slider. For clothesline towels and other atachment.
Osvaldo Cavandoli (January 1, 1920 – March 3, 2007), also known by his pen name Cava, was an Italian cartoonist. His most famous work is his series of short animated cartoons, La Linea ("The Line"). Cavandoli was born in Maderno sul…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed a carabiner with a lock and a hole for attaching a rope. There are three versions to choose…
There are 6 varients, Goggles strap mount / Goggles strap mount easy print & versions with a cable tidy Belt mounts in standard and easy print (slightly wider clip.
There are several lightweight water bags, watering cans, buckets or small, foldable pitcher out there. But most of them are hard or impossible to use for filling the caravans watertank. The inlet is aligned horizontal and quite deep,…
This print holds six bottles of beer in your fridge and prevents them from rolling around. The model can be used sideways or upright depending on your needs. Perfect if you need to keep a six pack of bottles chilled but with the least…
Hanuman is a symbol of strength, loyalty, devotion and dedication. He was the son of Vayu, the god of the wind, and Anjana, a celestial nymph. In this comic inspired original concept, Hanuman is depicted carrying the his iconic mace, 'the…
In keeping with the frame design, a sleek solution to a problem you shouldn't have!
What makes it special This is my first maze puzzle box, and I put a twist maze into a sleek box shape. I rate it about 6/10. A stranger would struggle to open it, but once you learn the path you can remember it and work through it again.…
Introducing the Ravager from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base attached. If you have already hunted this machine you…
Print and glue two round or two oval keyrings of your choise. Contact me for other brands. Add your own text in PrusaSlicer : H A P P Y C A M P I N G !
UPDATE: I fixed the chihuahua's front legs. To make them stronger. Old model deleted…. Low poly čivava dlouho jsem scháněl pěkný model čivavy. Nebyla žádná milá, která by za to stála. Jen ne moc hezky placené. Rozhodl jsem se tedy vyrobit…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
🇷🇸 Добродошли у Србију Welcome to Serbia! This model was designed by Dany Sánchez . The Church of Saint Sava is a Serbian Orthodox church located in Belgrade. It is one of the largest Orthodox churches and even ranks among the largest…
This is a remix of the great DJI Avata 2 bumpers from Kucici. I did make a slight modification which prevents having to use cable ties. I simply added a lip to the bottom support which allows the bumper to clip perfectly in place and is…
This is a model of the Valkyrie Shuttle from the Avatar series. It is made as a kit and does not require any glue. The model has several features: Openable roof door Movebale engine parts VTOL engines can rotate Openable back door…
This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…
I love my nasal irrigator but hate the cost of the pods. It's easy to mix your own saline with distilled water and salt at whatever concentration you like. I personally like to add Alkalol as well. To use this insert, just drop it in. As…
Lava lamps are so cool! So... why not making a pot like them! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the pleasure to review this…
A rugged looking stackable tray to store small items. One of the faces has a dedicated space to stick labels on. Overall dimensions are 18.2 x 15.2 x 3.2 cm. Comes in 2 versions - with or without dividers. If you enjoyed this model, check…
Bumper guards for DJI Avata 2, fits in original holes but you will need 4 longer screws M1.6x10mm. Printed with PETG 100% infill, 0.15 layer, without supports.
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
I created a clamp for my awning so we can hang things. The clamp I had seen on thingiverse was the base of my new design, I recreated it in a smaller version so it would fit the awning. Printed it with PETG 0,2mm layer height and 20%…
UPDATED 11th March 2020: Added straight-through Y pattern, optional flow arrows. Having a european-built caravan in Australia, I found it very difficult to get the 28mm diameter sink and drain pipe plumbing these are fitted with. I tried…
used these USB LEDs you can buy them here použito tyto USB LED zde je koupíte
The Avatar 2 product has a very close distance from the ground to the sensor. So I think using my foot cover will be helpful.
Saraswati is the hindu goddess of knowledge, wisdom, learning, music and fine arts. She is seen carrying a “Veena” which is a musical instrument. This is a symbolic meaning which means to tune oneself into their own world of self…
I love what ProfessorBoots ( https://www.printables.com/@ProfJohnny_823077 ) has done for the 3D printing community. Please support ProfessorBoots for all of his work to make these models come to life. It does take hundreds of hours to…
Redesigned the hook so it would print better then his version. Now you can you use it also for hanging towels. hook for awning rails hook for tent rail In addition to this, see also:…
Earrings of all the element symbols from avatar. Print instructions Layer height doesn't matter that much. Additional earhooks needed. Have fun!
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Unleash the fiery charm of the Elder Lava Dragon ! These fierce-yet-cute articulated creatures come in three sizes – Baby, Teen, and Adult –…
The standard pool vacuums sold didn't suit me because they have little pull due to their size and wide openings. I needed a vacuum cleaner that was just big enough, that was low and, thanks to the larger pull, would pick up small debris…
Generic Medieval Knight Cavalry Command for 1:72 wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games
Appa whistle, generates a high pitch noise.
V2.0 is available here, the model you are currently seeing is outdated This keycap puller is a V1.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of…
Approximately 600mm long model of the CAT 395 excavator. The model has working tracks, a rotating floor, and a fully movable arm and bucket. The model is printed entirely in PLA with a resolution of 0.20 for the larger parts and 0.10 for…
To view updated version of this model please click here. There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST…
I made this model 9 months ago and converted it now for 3D printing. Hope you like it and IF YOU PRINT HER PLEASE POST IT! Thanks. Want to have a detailed look at the model? Here for 3D renders I printed her with a scale up of 390 percent…
UPDATE 05/07/2025 : the step files are now available ! I originally created this high clearance / low profile bumper for the Trx4m Bronco to solve the issue of poor attack and departure angle, as well as to reduce rubbing of the wheels…
GoPro Hero 10 (9) Battery Cover | Cold Shoe Version available Simple and fast to print cover for the GoPro Hero 10 (and 9) to allow charging while recording. Useful for long video recordings or time lapses. The Cold Shoe variant is useful…
Stand for the DJI Avata 2 drone. The stand allows you to connect the USB cable when the drone is on the stand
Generic Medieval Knight Cavalry with Lances for 1:72 wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games
OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…
Hello everyone, I’ve designed a handy child safety lock for caravan windows and wanted to share it with you. This lock is specifically designed to prevent children from opening the windows on the bunk bed, ensuring extra peace of mind…
Türfeststeller in abgeschrägter Trapezform, damit die Tür auch gut hält. Leicht zu drucken, nur für ein Teil kann man Support einfügen. Gedruckt in PLA+
This is Erdinger's bucket remixed for the Huina Excavator (1550 / 550 / 580) Weights less than the metal bucket which is a nice bonus. Is plenty strong even for the servo-screw modified rigs. Sand Bucket now available (larger, no teeth)…
Best possible passive cooling for the Charger and Batteries due to open Frame Design. Easy to print, due to seperate Parts. Use 25 M3x6mm Countersunk head Scews to assamble the Parts. The "mid" part must be printed 3 times.
Introducing the “Ball Fidget Spinner”. A great gift idea for those who like to assemble things before using. 2 versions available for download (.stl & .3mf files available): 1. Ribbed style 2. Inverted knurled style. Tip: use your…
Lego Duplo excavator digger bucket and arm piece with joints on each side. Not 100% accurate but fits. You can easily modify my models on onshape.com (they offer free tier with only public models), it's not that different software from…
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
Showcase the ultimate blend of practicality and performance with this 3D printable STL model of the 2020 Audi RS6 Avant. This high-performance wagon model is perfect for automotive enthusiasts looking to display the versatility and power…
1/2/2025 user Jonathan Wolff reported box will also hold Anschutz 10 round magazines 8/21/2024 9/21/2024 Added two Savage labeled lids and one blank lid. 2/22/2024 User reddog kindly advised box will hold Savage MkII 10 round mags.…
Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…
Print your own availability status sign/ indicator for your office! Largest part is 220mm wide (Fits on Ender 3 printbed) Total assembly size: 236 x 66 x 13mm https://www.youtube.com/shorts/jL63w14zDOU You can make your own custom or…
Pretty simple to print. 0.2mm layer height and I do three walls. You can mount it to the camera with screws (if you have some small enough) or glue. I prefer using glue and I haven't had any issues with it yet. I've printed it in TPU,…
Here is desktop storage box that I made for everyone. It comes in four styles. Choose according to personal preference. Hope you will like it and be useful to you. ( Another Model ) Tip: It should be noted that, You'd better to use tools…
Headphone holder for desks with small edges If you can't find a headphone holder that clips on your desk because the edge is too small, this headphone holder is designed for desks with about a 15 mm (0.6 in) usable edge. The thickness of…
A while back I was hired by Adam Savage to 3D model a small robot that he designed. We printed the parts out and put them all together in a Tested video. Now you can download those files and print a copy for yourself! I filmed an assembly…
This is a general purpose linear servo actuator (pusher style). Two sizes have been designed, for different space constraints and force outputs. These use continuous rotation servos which helps keep the cost very low. Off the shelf…
Hooks designed to hang and display your beautiful Saturn V LEGO set (21309). It only displays the Saturn V rocket. The hook part needs supports to print correctly, while the wall-mount part doesn't. To install, screw the wall-mount part…
Can be swapped directly out with the original claw attachment pieces. Created to scoop more beans!
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)
can be printed together or separately in other colours can be printed without support the Chevrolet Avalanche is very realistic Print in place kit card , Assembly required
Ich habe eine Hartschale für die DJI Avata 2 entworfen. Grund dafür ist der sichere Transport speziell bei Reisen mit Koffer. In der originalen DJI Tasche oder ähnlichen Soft-Taschen ist die Avata 2 vor keinem Kofferband und Gepäckwerfer…
Model of the "Ahava" (Love) sculpture at the Israel Museum in Jerusalem
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
![Rugged (looking) Stackable Tray [2 versions available]](https://media.printables.com/media/prints/0ceb978a-83bd-4818-88db-4713d60f1e8c/images/13603041_a4560b7c-742f-4671-b3a5-dee4025cb89a_e346db02-35cc-4b65-a329-5d85f4eed984/stackable-tray-poster-1.jpg)
![V1.0 Universal Keycap Puller [Apex 9/Pro Replica] *V2.0 AVAILABLE*](https://media.printables.com/media/prints/1063837/images/8051042_4dbcd059-28ff-4873-a9ae-ae9c975cb571_2dfe49e3-f5d3-408a-8202-62989a22972f/20241105_191539.jpg)
