Liczymy pasujące modele…
This is better printed in ABS/ASA to whitstand the heat, it is designed to be wrapped either in fabric or vinyl. A printer with a 250 size bed is needed all parts can be printed without any support altough brim is recommended for some.…
NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1
Another great Model found over at onekura.com. Cheers Jace
This prints fine with supports on FDM. It requires a small amount of flexing of the 3D print to put onto the headset, if you break the clip just print another. This has a front/rear version - the front works better for me, but try both…
Pimax Dream Air Splitter Box Clip AVP Dual Knit Band
🌀 Predator Shuriken (AVP-Inspired) – Functional Prop Replica A fully 3D-printable fan-made Predator shuriken, loosely inspired by the Alien vs. Predator movie series. Designed for both display and articulated movement, this prop includes…
Anti vibration pads for Noctua Redux fans (140 and 120mm) Print in some flexible material, like TPU. I printed with Eryone standard TPU.
This is a remix of Noctua’s NA-AVP1 fan vibration isolation pad, modified for successful 3D printing. The original design is intended for injection molding and does not print well as-is. This version has been adjusted to print cleanly on…
Properly converting the BoboVR M2/M3 to the Apple Vision Pro. This print will allow you to convert a BoboVR M2 or M3 halo style head strap to fit the Apple Vision Pro. Unlike other conversion efforts that adapt the existing Meta Quest…
A simple holder for the 4-port RAVPower USB-Charger. Two holes for screws to mount it to your wall or your desk. Print instructions No supports needed.
Needs to be printed with supports, I did slim tree supports touching build plate and a brim to ensure it didn't move during printing and it came out perfect, hopefully will for you too .2mm works fine.
I made a holder for my 6-port USB charger RAVpower RP-PC029. The holder can be mounted with double-sided tape or screws, un horizontal or vertical position. Prints without supports, if oriented with the opening up. I'm not gonna ask for a…
This is a custom piece, designed to meet the request of holding 2x Aspire AVP Cube and 2x Vaporesso XROS Mini's along with 4 10ml bottles. This is simply a ‘thing’ to keep these objects tidy on the users desk. I added some 3m non slip…
About the Canon LP-E17 RavPower Charger Skadis mount: This is a skadis mounted charger holder for the dual LP-E17 battery charger from RavPower . It lets you build a wall charging station very easily! How to print: I recommend a 0.4mm…
avp digits aliens predators numbers on separate strips - each die is 10.5x14x1.4 mm with
Project Overview This project features a custom-designed PCB , a connector arm that links Akari’s Facial Interface to the AVP Solo Knit Band or AVP Dual Knit Band and a cable guide for clean cable management on the AVP Band. Connector Arm…
medailon ikonických monster
This is holder that allows an IPhone 10 and others with or without case to be easily sat on top of the RAVPower Magnetic Wireless Charger 15 Watt. The Charger is designed for the IPhone 12 but it works ok with an IPhone 10 and better w…
My first ever 3D model for printing. Overhauled to provide a stop when inserting the USB cords. I always wanted to fit the power brick for my Raspberry Pi cluster under the wooden rack I build myself. Thanks to the Prusa Mini+ I know can…
This is a custom wall mount designed for the K&F Concept NP-FZ100 battery charger (with dimensions of approx. 21.5 × 54.1 mm) , which is often bundled with dual battery packs (2600mAh). The mount is fully compatible with the IKEA SKÅDIS…
Uses supports on FDM. It requires a small amount of flexing to put onto the headset, as the original author said, “if you break the clip just print another.” This was specifically remixed to work to be able to add second Solo Band to an…
Supports the "Raspberry Pi rack case or rack cluster" thing found here: https://www.thingiverse.com/thing:2795195 Attaches to the side using #4 sheet metal screws and 3/8" cable loop/clamps like these:…
This is a custom wall mount designed for the RAVPower and BLUMAX NP-FZ100 battery chargers (older generation models) , used with Sony Alpha cameras such as A7III, A7IV, A7R III/IV/V, A7C, A7S III, A9, FX3, FX30, and others . ⚠ Please…
A battery holder for the RavPower RP-PB13 battery pack that attaches to the leg of an EQ5 tripod. I designed an appropriate holder (in OnShape) for the size of the RavPower RP-PB13 pack and mashed it onto a z-axis scaled up version of the…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Simple holder for a RAV POWER charging hub. I attached mine to the side of my desk using a command strip. It is relatively slim so it can fit behind desks
Hueforge of the first AVP film cover. I have produced a print in white and one in glow in the dark green, both look amazing. If you wish to print the green/glow version, then swap the white out for a light green or glow filament. The .3mf…
Added a pause in the slicer if you want to add the silver color 0.2 layer height 2 walls 3% gyroid infill without suport
3D printable topographic miniature of Daugavpils - 🇱🇻 Latvia Capture the beauty of Daugavpils 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 55.871, 26.514…
Since nobody was willing to make one, I ended up doing it myself. This comes in to variants: An adapter to replace the the original strap with a an AVP Dual Knit Band and an adapter to reattach the original strap (which of course has to…
This is a custom base designed to hold the RAVPOWER MagSafe Wireless Charger . Works well with iPhone, AirPod and other devices that support wireless charging. It can be printed in either single color or the STL could be split into two…
This holder holds 4 of the 26800 mAh RavPower Xtreme series batteries
This is a simple little stand for holding the infinitely useful RavPower WD02 travel router. It's a great little portable router but it's designed like a bar of soap and there are ports on both of the flat ends, which means if you use the…
Since there is nothing here yet for the 6 port hub from RavPower, I quickly designed a holder myself. The hub fits sucking purely ;-)
Printed on Creality Ender 5 Pro Elegoo PLA Pro Black Filament Bridging angle set to 45 Deg No supports necessary I turned ironing on to have a nice surface for the tray
As said, it's simple and I have no idea how many people are still using this dated charger. But if you do, you may find this useful. I power a couple of ESP32 and Raspberry Pi's through it. It's not super polished, could have some more…
A cover to seal your sd card slot on your Ravpower Filehub to avoid dust and moist going in there. Print with TPU or TPE or other flex filaments. UPDATE: The (1) file is for the newest Filehub generation. Category: Camera
