Liczymy pasujące modele…
A small easy to print holder that screws in to the small thread holes of MultiBoard. It has the main holding sections where the deburrer hangs in place. It also has two holes that can hold spare blades for the deburrer. the File should be…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
L300 CarPlay unit made for Honda cb1000r printed in PETG The model use the OE screws and rubbermounts The model i made to make a slick mount that look almost OE and is as minimal as possible 4x 5mm nuts 4x 5x30mm bolts the carplay unit i…
just superglue clip part and mic part each other
Keep the dust out of the ports on your Nitecore NB10000 while on your adventures. Also prevents accidental presses of the power button. Confirmed fits Gen 2, untested on Gen 3 Print Settings Material: TPU 95A Support: None
** If you find my designs useful, please tip $1 by clicking “Support Designer” on my main profile page. Thank you!! *** Print Settings Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: .24 Infill: 10% Filament…
It's a simple cover to help prevent the dreaded NB10000 accidental long button press that disables the battery. Easy quick TPU print.
remixed the model to fit BOSGAME B100 Mini PC
Finaly the cable for your VB 100 and the cloth for the SPB100 can be placed in one spot and you don´t have to have the wire laying in your way. I also included the Fusion 360 file so you can adjust the part to your personal needs.
Update 06-12-2021: Just added a step-file, so you can make changes more easily. Update 04-04-2021: I build the frame and can confirm: it's finalized! Update 03-01-2021: As requested i uploaded an alternative version of the side plates…
Holes are sized for #8 screws. Also have a version for 3M adhesive tape. Added a USB cable holder.
We love the little SONY SRS-XB100 bluetooth speaker, so I made this simple shelf to let it sit on the headboard of our IKEA bed. The thickness of the board is 34mm.
Diese Standfüße sind zur zusätzlichen Montage an der Soundbar DSB1000 der Marke Grundig gedacht. Die Standfüße haben eine Höhe von 2cm - 4cm - Material: PLA - 20% Fülldichte - Stützen beim druck
I made a MWB100 tray to put all my stuff on : pens, ruler, tape measure, drill bits, screwdriver bits and so on. After installation i found that I didn't have sufficient place to add another tray for the Festool clamps type FS-HZ 160 or…
Mine was missing and the replacement cannot be purchased, so designed this one and printed it in PC. PETG might be strong enough as well Replaces original part: 17921-881-000 Material: PC/PETG Layer: 0,2mm Supports: No (rotate model to…
This is the piece that links the interior front door handle on a MB100D van (mine is 1995) to the rod which operates the door latch. The original broke on one of mine. The long part on the original is a ] section, mine is solid a) ‘cos…
Při pokusu o rozhýbání totálně zablokovaného počítadla na 40 let starém a prorezlém magnetofonu jsem ulomil jednu z lamel nulování. Celý díl nulovacího hřebenu jsem proměřil, vytvořil model a vytiskl. Bylo pochopitelně nutné otvory pro…
Starting from the 3mf file from Sitoko, I redesigned it to modify the tongue and the groove to comply with the MWB. Made with PETG, standard infill, and supports for the tongue on the rear side.
Replacement for the Honda 28455-881-006 Plate, Seal. I've printed mine in Carbon Fiber reinforced filament, but ABS should be enough.
Noga Teddyburr (TB1000) 2.6mm Deburring System Case Insert Print the outside case and the top insert without blade holders of the original files . In addition, print the insert and 6 separate blade holders from this listing. The separate…
For a modified Bosgame B100 mini pc. I removed the mkey wifi/bluetooth card and added an mkey 2.5G NIC. The backplate provides a spot for the RJ45 connector to slide in without being too bulky or hard to connect/disconnect. I left it as a…
TPU protective case for the NITECORE NB10000 Gen4: two versions, one with a MagSafe ring and one without. Printed using Siraya Tech FLEX TPU Air at 70A setting. 2 walls, 15% infill. Prints upright with no supports needed for both…
MAJ 2026-11-02 Voir les 5 dernières photos -Modification du modèle (rajout d'un repère sur la face avant). Positionnez l'enceinte correctement sur son support puis rajouter un repère avec un feutre sur l'enceinte en face au repère, ça…
Remix of Zakoplex's NiteCore NB10000 Gen2 Accidental Button Press Protector, with modified button slot. Printed on an MK3S+, 0.4 nozzle, 0.2 quality. Sainsmart 95A TPU. Sized the model down to 98% to make it fit more snug.
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Przedstawiam uchwyt do lampki na monitor Silver…
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Przedstawiam uchwyt do lampki na monitor Silver…
This is a phone stand for the “Sunny Health & Fitness Indoor Exercise Stationary Bike", model SF-1001. This will attach directly to the top section of the handle bars. Print Settings Printer: Ender 3 V2 Rafts: Not needed Supports:…
This model is a replacement for the original chip tray of a metal band saw. The band saw is sold under different brand names, e.g. Bernado EBS100S Optimum S100G BS-100 Small Sawing Machine Portable Metal Band Saw Machine Movable TTMC…
Prints okay in PLA, but very stiff and tight fit; might need a little sanding or other postproc. Probably better in PETG as it has a bit more flex, but untested. Print as oriented. Printer used: Elegoo Neptune 4 Plus Walls: 2 Infill: 10%…
Powerbank holder for the Nitecore NB10000 Gen 2 and 3. Print in PLA 0.4 Easy print, perfect size and very stable.
A bicycle mount for the Sony SRS-XB100 speaker. Fits on a 22m bar. Designed for M3 bolts (16mm length) and M3 threaded inserts (5.7x3.9) - I'm using inserts from CNC kitchen. Printed with supports at 50% infill and 4 walls.
This replaces the Noga RB1000 tool handle and holds RB1000 blades. The blade won't slip out but will swivel. I printed in PLA on MK4S. Quick -8 minute- print, easily replaceable. Not as nice as the Noga tool, but cheap and very…
Holes are sized for #8 screws. Also have a version for 3M adhesive tape. Added a USB cable holder.
This replaces the Noga RB1000 tool handle and holds RB1000 blades. The blade won't slip out but will swivel. I printed in PLA on MK4S. Quick -8 minute- print, easily replaceable. Not as nice as the Noga tool, but cheap and very…
Powerbank holder for the Nitecore NB10000 Gen 2 and 3. Print in PLA 0.4 Easy print, perfect size and very stable.
