Liczymy pasujące modele…
I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…
There is a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers! patreon.com/dakkadakkastore myminifactory.com/users/DakkaDakkaStore?show=tribe Battle Brother consists of 4 parts. 2 versions of files are…
THIS PROJECT IS ON PAUSE I just don't have the time anymore right now. I regularly get messages from some of you for the source files. So I released them in the zip-archive called "source" as .ipt (Autodesk Investor) and .stp. Right now I…
The case is based on my parameterized “ Rugged Box ” and holds Brother TZe label tape cartridges. I also made a stand/catch tray for the P-Touch P700 label printer . Support my work For non-Prusa parts and filaments, check out 3DJake (…
Super Mario Brothers I've added a thicker more rigid V2 model for free-standing use/display. If you're placing Mario & Luigi on a wall, you might want to use the V1 model to save some filament. Tip: The tab on the bottom is designed for…
This is a gridfinity native Brother P-touch TZe Label Tape storage box. This can store tape cartridge larger than 12mm.
These extensions are to support the mats for the Brother ScanNCut DX range. I recommend printing at 0.2mm layer height with 6 walls (to eliminate the need for infill) and also print with a brim as they are quite narrow. It's a quick and…
Remix Brother Label Design. (thank you elumspe ) The information used referred to the contents of bambu studio. (Do not download the stl file. it used for upload post) for brother 12mm film. I haven't tested anything other than 12mm, but…
This is a modification: https://www.thingiverse.com/thing:5146836 The original was too tight and the cartridges did not fit. I printed 0.3 (because I wanted it fast), but 0.2 is better. Tape 6mm = Tape 9mm = Tape 12mm. PLEASE SEE MY OTHER…
(Deutscher Text: Scroll 'runter...) -- UPDATE - 06. December 2025: I updated the model: made it a bit tighter and the clip has now a bit more grip. When I designed this over five years ago, I printed it on a TEVO Tarantula with way too…
Basic primitive hoop edited for embroidering socks on the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
Original totem from the movie Brother Bear
Let me know if there any other video game characters you'd like to 3D print :)
Updated Textured PEI Plate & PEO cool plate with new QR Code for 12mm label Brother P-Touch printer. It is useful if you have Lidar, so it automatically detects the installed plate. You will need P-Touch Editor in order to open the lbx…
I used support for the helmet and chest armor
Purpose This sock frame (or sock hoop) is an add-on for the 10x10cm frame for the Brother Skitch PP1, a cheap free arm embroidery machine, for printing on socks and similar items. It replaces the standard the magnetic cover and you will…
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
A faithful re-creation of the brotherhood logo from various fallout games / media STL and STEP file included for both versions pictured print instructions: some parts are pretty thin so maybe use a 0.12 setting for layer height and a good…
ohuf's design holds the P-Touch TZ Label tape very nicely, I just added Gridfinity'd it. 10 tapes fit perfectly in a 2x5 Gridfinity footprint.
zv ⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on…
Print laying flat For best look use the filament change function in the slicer to make the logo dual color I changed the bridge angle in the advanced settings to 45°
Baskets are one-piece easy-to-print and lightweight to save print material. They are held in position by the rubber bumps under the printers. A slot in the front makes it easy to pick out printed labels. Holes in the base plate are round…
Here's my model of Malcolm's Gun From Firefly(Aka Moses Brothers Self-Defense Engine Frontier Model B). I scaled it up 300%(I had the model printed diagonally to fit the print bed). You might want to sand the connection points if they're…
Simple bin for brother TZe Tapes. 12mmx4 and 18mmx3 available so far. thank you to scheff for the step files! https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization Gridfinity by Zack Freedman:…
I really liked https://www.printables.com/model/302028-brother-p-touch-tze-label-tape-gridfinity-storage- by serialx for storing my TZE Tapes. I really liked that it fits any size tape. I just had two small issues with it. 1) I like…
Print at 0.1 mm layer height for smoothest results. There are 2 variants. I printed the 6-cart and 10-cart “standard” variants but couldn't get the “curvy” variant to print as well as I would have liked. Here (image below) I tried…
Supports that clip onto the back output of the brother Scan N Cut DX to support the mat
Super Smash Brothers Sans Character with Blaster in Crouch Position.
Pastille de blocage de machine à coudre Brother Sewing machine spool holder (Brand Brother) 25mm
A cool 3D photo frame that makes a great decoration or gift idea. Simply cut out the photo and insert it into the frame from behind. Then just insert the lid if needed and you're done. This is a fun gift with nice details, I love it, to…
Outline holder for Brother P-Touch PT-H110 label maker.
Funny dinosaur brothers. Guys, don't print just yet! I found problems and will fix them. I will release a corrected version later. Thanks for understanding!
My kids and I enjoy playing Stuffed Fables (and now also Oh, Brother expansion). I also enjoyed painting the minis. Problem is the game is a pain to setup & pack away, plus all the painted minis were getting knocked around in the awful…
English: This 3D printable wall art is inspired by the iconic style of two suited men in shades and hats – a tribute to classic blues, soul, and vintage pop culture. Designed as a high-contrast silhouette, it’s ideal for laser engraving,…
Holds 4 Brother TZ style printer cartridges, used in a P-Touch printer, in a 2x2 Gridfinity space. They are held ‘vertically’ so that they take up minimal gridfinity squares on your baseplate. There are no magnet holes in the base as this…
A removable basket to catch the labels from your Brother QL-700 to stop them from landing behind your desk! This is a three-piece design that uses the printer's own weight to hold the basket in place meaning that the basket can hang over…
These worms can be a little scary, but they are very cute! Brainy (with his brain visible) and his Siamese brothers are very nice! The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts and…
A stand and catch tray for the P700 label printer. Three sizes of the catch tray are available as STL (40/50/60/70/80 mm depth). The F360 file is also available in the files section to create other sizes or modify it further. I also made…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
This digital model showcases the T-60 Power Armor , one of the most powerful and iconic suits from the post-apocalyptic world of Fallout . The model is presented in a combat stance on a themed base that instantly identifies its origins.…
A modular holder for Brother label maker tapes (and various 3rd party tapes). It fits all standard tape widths - 6mm, 9mm, 12mm, 18mm, and 24mm. This is a remix of Nieuniknione's model (that is a remix of vinceformosa's model ) that adds…
I measured a bobbin included with Brother LS14S and made a print compatible version from scratch. If you want to use it with your other machine, this bobbin is 20.5 mm x 11.0 mm with 8.70 mm outer diameter shaft and 6.50 mm hole. You…
Dust cover for Brother KR 830 / KR 850 ribber extension - print left and right two times. Print them standing upright on their left/right outer edge with brim, no support needed. Your printer needs to be capable of printing at least 240mm…
They're too much! It's the Miser Brothers from the 1974 stop motion Christmas Classic “ The Year Without a Santa Claus ” by Rankin/Bass Productions. These models are based on vector images provided by ClipartWarehouse on Etsy and use…
This is an assortment of Brother P-Touch TZE Tape Holder bins: Versions for 6-12mm, 18mm and 24mm tape Holds 6 tape rolls each (perfect for storing color assortments of the same size) Gridfinity compatible (Non-stackable to allow for…
Made this model a few years ago. Wanted to share with everyone here. The only thing to watch out for is the supports under Mario, flag, and flag pole. Be very careful removing it! or just leave it in place! Happy Printing!
This is a Gridfinity holder for the Brother P-Touch cube. I own the PTP710BT model, but this should fit any of their label makers with the same form factor. Since I had some extra space, I also included a small bin to collect the labels…
Eine herausnehmbare Schale zum auffangen der Ausdrucke für den Brother P-touch P700.
I found that a Brother P-touch D610BT label maker (and possibly other similar models) fit nicely in a Milwaukee PACKOUT Compact Organizer (48-22-8435) but the TZ-e cartridges and other associated cables didn't fit very well so I modeled…
UPDATE: Added cartridge stand for 4 cartridges. Stand for Brother P-Touch PT-P300BT printer and 12 mm TZe cartridges. Both stands has the Gridfinity pattern in at the bottom. A cartridge stand without the gridfinity pattern is also…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Part of Paper tray for Brother DCP-T420W and probably for Brother MFC-J480DW T525W T510W DCP-T510W T525 T560 T310W T420W MFC-J485DW J562DW J485 T310 J480
Sans Super Smash Brothers Key Cap
Check out this Scout woggle featuring Gray Brother, the wolf from the Jungle and Mowgli's best friend. Enjoy this cute wolf puppy caracter! It's the perfect choice for awarding to a Cub Scout named after a character from Rudyard Kipling's…
Organizer for 10 Brother P-Touch standard size TZ/TZe tapes
Used tinkercad and added mounting holes for the IKEA Skadis Board. Now I can hang my brother P-Touch E1110 Label Writer to the Skadis Board. It's not the best design- but it works! :) This is a remix of the Mr_Dan-File. -- GERMAN Habe die…
A bracket to hold the Brother E550W label printer (p-touch system) on an Ikea Skadis toolboard. Should be self-explanatory. Add two rubber domes at the back (bottom) for extra stability. Or edit the model to add a lip there.
Some more renders of the original TZe Tape holder by ohuf. Numbers from the comment by Fallon: cartridge's measures 16.25mm wide, 18mm measures 22.25mm & 24mm measures 28.50mm. I've added 1.5mm to these measurements to get the slot sizes.…
Bring some musical swagger to your rubber ducky collection with this Blues Brothers-inspired design. Featuring iconic sunglasses, fedoras, and sharp suits, these ducks are ready to hit the road on a mission from God! Printing Details:…
A quick replacement for my broken embroidery ring.
Little Mac from Super Smash Brothers
for printing and use instructions please refer to the original model!
Spacers/shims for Crank Brothers cleats, modelled on “ Crankbrothers Shoe Match Shim" (part no. 641300166852). Have included a variety of thicknesses in addition to the “regular” thickness, should people want to fine-tune more than the…
Haunted Mansion Tombstone Brother Claude
This a tile holder for Assasin's Creed: Brotherhood of Venice. You can place the roof tiles on it to create a better view of the game. 2020-10-03 Test print came out a bit too small, adjusted it so all sides measure 100x100 mm. Also…
This prints in two parts without supports. The pieces should press-fit together, but can be glued if the fit isn't tight enough
Quick model I made to replace a broken thread thee on on a Brother 1034D overlock machine/serger. Same layout & spacing as the original. Slight modifications made to enable printing without supports, bar shifted to the back of the post.…
With this inlay for the Brother Scan-N-cut SDX 1200 you always know which knife is in the machine with the marker pin. ( Cut a headpin to the desired length) the box does not have a bottom plate everywhere, because otherwise the lid…
Print 12 dividers if you want to cover yours bases. Any unused dividers can be stored in the box in the center. Fits up to 14 slim cartridges or 10 medium or 8 wide ones. Or any combination of cartridges.
Need a replacement for your Brother 1034D Serger's lost or broken thread catcher? Look no further. This design incorporates a sturdier retention tab than the original to keep the basket snug against the body of your serger, and even…
Selbst konstruierter Leitbaken. Druckzeit (Leitbake mit Fuß): 1h Material: PLA (Bake) & PETG (Leuchte, Fuß) Maßstab: 1:14,5
Since every label printer owner have different number of tapes there is no one size fits all organizer - so I incluced files to create your own. Files included are 3mf to ensure that you will have nice hex grid using infill. I printed…
An Organizer for Brother TZE Tapes 6-12mm 6 Cassettes and 3 Slots for 24mm Tapes. The Brother Logo is 1mm raised to print it in blue or the Colour of your Choice.
the hoops take fare less place with this hooks, it's a great organisation improvement. printed with no supports. for the fixation., you need three countersunk screw (head diameter=7mm and thread outer diameter=4mm) printed in PLA one year…
This case fits the Brother P-Touch Cube Plus. It is possible to store up to several tape rolls in the case.
Print in single color or AMS 2 color. Designed to fit the 6mm rings on keychains. From the Fallout video game faction. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (…
Used Fusion 360 Gridfinity generator Since the tapes are just a bit wider than 2 units and the printer a bit narrower, I have combined the storage for the printer with space for several tapes. Also included a slit to keep the tape guide…
This customizable modular organizer is designed to store and organize Brother P-Touch TZe label tapes of all sizes: 3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm, and 36mm. It's easy to configure for your specific needs! You can choose how many…
Impreso en PETG Layer 0,16mm 3 perimetros Infill 30% honeycomb
Last of my 3D scanned D&D minis from the '80s. This is the lone remaining model I have from the Elves of the Silvan Brotherhood set (6003). This is model E2 "Battleaxe". Category: Toys & Games
Height: 20 mm 6 bays for standing: 16.5 x 4 - 28.2 x 2 6 bays for laying: 16.5 x 4 - 28.2 x 2 5 bays for standing: 16.4 x 3, 22.4 x 1, 28,4 x 1 6 bays for laying: 16.4 x 3, 22.4 x 1, 28.4 x 2 Which tape size fits which bay: 16.4: 6 mm, 9…
[EN] Gridfinity bin fro sotring Brother TZe tapes. Standard size 3x3x5 units (X Y Z). Model has been created in Fusion 360 using GridfinityGenrator by Lev Mishin. [CZ] Gridfinity krabička pro ukládání pásek Brother TZe. Standartní…
This is a basic primitive hoop intended for making custom hoops for the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets
Printed bottom-down with support for the pegs
When searching for Big Brother Veto medals across other 3d printing repos, I didn't see many that resembled the ones found on the (US) show, so I decided to make my own. Through trial and error, I believe I've more or less hit the right…
This is part of our [Full Metal Brotherhood] ( https://www.myminifactory.com/frontier/full-metal-brotherhood-wargame-bits-vol-v-stl-models-for-tabletop-wargaming-1797 ) project! Subscribe to our Patreon or Tribe for better value because…
Top guide for a Brother ADS-1700W document scanner
While browsing available models, I did not really find one that I found satisfactory. Most models were big and “fat”, most merely a box made to sit on a desk. I was after something more elegant and that could handle all cartridges. This…
Selbst konstruierter Leitbaken. Druckzeit (Leitbake mit Fuß): 1h Material: PLA (Bake) & PETG (Leuchte, Fuß) Maßstab: 1:14,5
Yep. Just some simple trays to hold all your P-Touch sized labelmaker refills. Trays are 16xmx7cm and designed specifically to fit in these tubs. Print instructions Print flat side down. No supports necessary.
Uses the Gridfinity storage solution to hold the Brother P-touch cube label printer. Allows the printer to print while still in the box (using battery as the power port is covered). A nice height to fit into the bottom drawers of an Ikea…
I found it on Grabcad and adapted it for the usage with Skadis Pegboard. The universal Hook is used (2 of them) and a distance hook on the bottom. 4xM3 Screws, a bin below the printer and you're happy to print multiple labels.
A 40 mm fan guard with the Brotherhood of Steel emblem. Made with Inkscape and Blender. The .blend file can be directly exported to STL; just make sure to adjust the units as appropriate. You can also render it to produce the thumbnail…
The Towa Digital Tension Gauge is the perfect way to measure bobbin tension on both commercial and domestic style embroidery machines. Towa supplies L and M Style Bobbin Case Adapter. Here is an adapter for Brother bobbin cases for…
Just a simple box design, but I got the dimensions just right and wanted to share it. They are gripped and won't fall out but are easy to remove, like I said, just right. The box is designed to hold 3 sets of Brother/aftermarket 12mm &…
I have remixed the mount from Brother P-touch holder by RDX_x , thanks. ORIGINAL POST DATE 06-MAY-2020 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: 5% Filament: Any PLA White…
Simple model for mounting your Brother PTD210 on the SKADIS mounting system from IKEA. Prints upright, without supports.
