Liczymy pasujące modele…
I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
This is a kit card of the YF-19 Excalibur from the anime Macross Plus. It was suggested by Koobs7 over on Thingiverse, had a look at it and decided to make it because reverse wing aircraft are pretty cool looking. Normally I would give…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Burney Relief - Queen of the Night Ishtar/Inanna The restored Burney Relief shows color theme of red, white, black, and gold. There’s a naked, fully red-skinned woman, holding a golden loop rod in each hand. Her wings are red, white, and…
Wydruk około 8,04 €–9,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a model for an hamburger press to create the perfect mix at home. The model is done for 11cm hamburger and you can rely on a tall container to choose favourite hamburger height.
Wydruk około 3,11 €–3,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Weihnachtsdekoration Christi Geburt Ein einfach auszudruckendes Weihnachtsmotiv in Form eines Sterns zum Schmücken des Weihnachtsbaums. Ich habe die Form des Sterns als Modifizierer verwendet, um nur das Sternenmuster zu drucken. Der…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Yamaha XT600E Secondary carb butterfly valve needs 7mm opening in primary carburator slide prior to it's opening. This tool is to make synchronization adjustment easier. Just slide this tool under the carburator slide, obviously flat side…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have ever wanted square hamburger patties, now is your chance!! Remember that PLA, PETG or many other of these plastics are not recommended for long term food applications . SO, print the Square Hamburger Press for your next cook…
Wydruk około 5,73 €–7,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wilbur the Washing Whale is a timer for handwashing. He is designed to sit on the edge of a sink or tub. Simply fill the basin in his tail with water and he will swim and spout for 25 to 30 seconds. He also makes a great bath toy! Great…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
1st Layer: 0,15 other Layers: 0,16 Perimeters: 2 Infill: 25% Grid Scaled down to 80% (in pictures) printing speed slowed down about 30%
Wydruk około 0,85 €–1,03 € nettoWstępna wycena jednego wariantu
Používal jsem už původní model, ale přisávání horkého vzduchu od výtisku zhoršovalo kvalitu tisku a tak jsem si stáhl vylepšený, který tiskl přeci jen lépe. Ovšem i ten jsem si upravil odstraněním horní části, aby se lépe chladil motor…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits this deburring tool kit: https://a.co/d/cgOKK9N Printed with PETG, 2 perimeters, support material on build plate, 15% infill. Includes modified Fusion 360 file from Shawn Stutzman that fits Vastools Swivel Head Deburring Tool 6 1/2"…
🇦🇪 مرحبا بكم في دبي Welcome to Dubai! The Burj Khalifa (برج خليفة, Arabic for "Khalifa Tower" ) is a skyscraper in Dubai, United Arab Emirates (UAE) . With a total height of 829.8 m (2,722 ft) and a roof height (excluding antenna, but…
This is a remix of Chewey 's deburring tool case and Whity 's parametric rugged box. It has an insert construction in the style of PjotrStrog 's Multipart Pinecil case. Like the original, this case fits a 150mm length tool from tip of…
VORON StealthBurner HEX-Face Update 25/12/2023 Rapido UHF Update 20/08/2022 final_version of SB **** Can be printed with MMU2 or can be done manually colors change with 2 differents gcodes need to import the files like MMU2 print even we…
Beachtet auch meine neue Version des LYNX Blaster CALIBURN 4 - EU Edition HINWEIS! Bitte druckt diesen Blaster recht Farbenfroh, so dass er sich stark von echten Waffen unterscheidet. Es handelt sich hierbei nicht um Kinderspielzeug und…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Please note, the hinges are elements from the original design & are not my work, yeah they’re a bit tight & no they’re not that great, but they do work. If I…
You need to print the Stealthburner files from the Voron website: https://vorondesign.com/voron_stealthburner Download the Stealthburner_Main_body and the desired files for the toolhead you are using. You need M3 hardware and M3 inserts…
A challenge for your brain and your printer! As well as being a fun brain-teaser, you can use this file to benchmark tolerances on your printer. Included are two files with different tolerances. The original file is also included with…
Fixed version of linked Thingiverse project. Printed on Bambu Labs X1C using Hatchbox Wood Filament. Use supports for the shields specifically and anywhere else you feel like it would be beneficial. Mostly default print settings for Bambu…
Updates 31 may 2024. Fixed the issue with the wall thickness of the Ducts . ⚠ Disclaimer: before starting printing, make sure the extruder motor on your printer has side screw holes. To check this, you need to remove the stock extruder…
This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1 The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend. The performance of the hotend…
This mod comprises 2 parts, the Orbiter v2.0 Mount and a slightly revised StealthBurner Front Body. The front body has some clearance cutouts for the Orbiter filament tension lever and some extra cable management sections for the fans and…
🇩🇪 Willkommen in Deutschland! Welcome to Germany! The Brandenburg Gate ( Brandenburger Tor in German) is an 18th-century neoclassical monument in Berlin, built on the orders of Prussian king Frederick William II. Throughout its existence,…
Vnitřní průměry jsou 70, 90 a 110 mm. Výška masa 15, 20 a 25 mm. Správné výšky dosáhnete zarovnání horního okraje a lemu lisu. Před použitím doporučuji navlhčit, aby se maso lépe oddělovalo od formy. Vytiskl jsem z PETG, aby šlo lépe…
This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy
The Latest D3vil Burner for Knomi V2 !! Introduction D3vil Design Burner for Knomi V2 , this model is made with lower colling ducts ( i will try to update it with a higher version later. Features - Drop in replacement for the Creality K1…
10, 18, 20, 21, 25, 30, 40, 50, 60, 70, 80, 90, 99, 100 th birthday geburtstag holder / stand for…..the XX th birthday ;) Also check out these models:…
if you’d like a commercial license to sell the physical model, you can find more info here:https://www.printables.com/model/681371-burlap-sack-pot-planter-commercial-use An easy-to-print burlap sack planter, requires no supports.…
The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts. The Features A…
Sam Schmidt from the Voron Facebook group designed an adapter for the Bambu Lab hotend for use in the Voron Design Stealthburner. This is remixed from the STEP files he provided to the Facebook group. In the original design, Sam used a V6…
This is a remix from Onelostcause ; original model found here . The original model is great for holding any standard/generic straight handled deburring tool. I wanted to incorporate blade storage while still retaining the ability to stack…
Building on top of the great Gridfinity block template by Filip Kolínský , I designed a tray for the AFA deburring tool inspired by similar trays from Onelostcause and Yoni . Uploading the Fusion 360 model file in case you want to make…
Since the SB2040 canbus board gets pretty hot it's not the best idea to cover it with a closed pcb cover. This perforated cover improves the temperatures already a lot without any built-in fan. Used this 2000h now without any issues with…
A simple holder for 3.2mm deburring blades. The handle is one piece. The tip is split by a small slot, so the blade can be pushed in and will snap in place. The ring keeps the two halves together. Update dec 25: Added new model files for…
Note: the New KnomiV2 files are available now !! The long awaited D3vil Burner by the D3D team, featuring Knomi support, is here! **Introduction** D3vil Design is proud to release the D3vil Burner toolhead cover for the Creality K1 for…
Since I couldn't find a good template online for pressing an MC rib patty, here's my own. I got the size from the design on Thingiverse by BigMacintosh85 and then adjusted it. The handle is more comfortable and the frame is higher and…
Part List Part Quantity Link 6x2mm 4 Amazon This is a gridfinity holder for a Deburring Tool, a Pointed Tiles Cutter Pen, and 15 extra blades. Mine was made by YUFUTOL but it seems like a generic designed with other brands on the design…
These models have been derived from the existing designs by Voron Design, thanks so much to the Voron Design team for the massive effort put into these excellent machines. Centralised BLTouch mod for Voron Afterburner (AB prefixed x…
Hold your AFA deburring tool on your honeycomb storage wall…and do it in style! The space for spare cutters gives it a very Game of Thrones feel to it. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part…
Excalibur is a pump-action blaster with plenty of power, quick spring swapping, and the ability to swap between full length darts or half length darts on the go!…
Deburring Tool Case for the aliexpress deburring tool. fits 10 blades and the tool. print in place model using 14 magnets (6X2) for securing the blades and closing the tool box. stop the print at height 2.8mm (10 magnets), 17mm (4…
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
A simple, sturdy burger press for shaping uniform patties at home. Consists of three parts: a ring mold, ridged press plates, and a press lid with knob. ⚠ Food Safety Notice FDM-printed parts are not food-safe. Always use a plastic wrap…
[English] I used the chain anchor 2hole design, closed the hole at the tip and enlarged the anchor a bit because I didn't like the designs or the just didn't fit. It includes a M12x1.5 thread to be able to attach a PG7 cable gland. Just…
You could print it with 0.4mm nozzle and 0.2mm height You would need 4 m3x4x5 heat inserts Update Added Step and 3mf files
Update: Dual Y motors printing @ 500mm/s Extra motor to compensate for bed wight using de Z driver slot and sending more current, files in folder Dual Y motors upgrade, careful my printer its longer in Y than the normal size, that's how I…
Introduction The 3D Printable Jet Engine is great! However, I wanted a turbojet or low bypass turbofan to complement the original. So, I got to work designing the turbojet , afterburner and variable exhaust nozzle. For this build you'll…
Added stl file Stand for dental drills with a diameter of 1.6 mm You can find other stands in the shape of a tooth for drills, stands for pens and brushes here:…
Printing Both parts are printable without supports. Assembly list of non-printed parts deburring steel blades
I've made a modified version of clockwork2 extruder to use my nema17 stepper motor that was lying around. currently there is no option to attach wire cover or use pcb https://photos.app.goo.gl/kay8pqxwpjpPym6F9 video example of working…
Update 14.10.2023: As @adamclerk_238889 commented that the CW2 main_body has been updated in July '23 (the little nose has been shorted a bit - have a look on the pictures). The filament sensor main body is also updated now. It also seems…
Burr baloni luli loli, capibarello cocossini, it is very rarely seen on the coasts of Bali, a unique coconut of its kind, which contains a capybara inside, it is such a rare event, that the locals gather around a bonfire, to celebrate the…
It's HUGE! It stands about 6 inches tall. It's semi coiled and if it could be stretched out it would be over a foot long. This makes it life-size! You'll need supports and you'll need them dialed in well!
Notes To use, insert a 0.125" shank deburring blade into the end of the handle until the groove in the blade lines up with the hole in the side of the handle. Press the clip into the hole until it snaps into place around the blade.…
A simple burger patty press designed to be strong enough so you can really pack your patty tight. The bottom is removable so your burger just pops out. Waxed paper separator discs in a variety of sizes are readily available on Amazon.…
Made this remix of the Rainbow barf LED carrier to fit the FYSETC variant. The FYSETC variant doesn't have a notch in the PCB and the connector takes up more space than the original design accommodates. The original file, including the…
— Handle With Care --- Introduction: Discover the thrill of launching matches with precision using my innovative 3D printed matchstick shooter. Crafted for safety and excitement, this print-in-place model guarantees endless fun for…
After creating some more complex models/containers with threaded attachments and supports, finally came up with this simple and less bulky design. The smaller cap goes into the larger portion. The larger part attaches to the top of the…
This is a very high detail model of a US Navy DDG, with the level of detail I would recommend printing at 1.0 layer height or better.
Replacement ripcord, the other ones on thingiverse did not fit 100% for the burst or broke easily. Kept the length about the same as the original cord. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Just printed out and hung my Multiboard. I found this really nice Deburring Tool Holder from Brad @FTBT 3D but it was for the HSW so I made a version like it in OnShape but with a peg that fits the Snap Connector on the Multiboard. I have…
LiteBurner KE Join my discord! https://discord.gg/uYBuFXUmcU I couldn't find anything I liked , so I made my own design. It accommodates 2x 5015 blowers and is designed to be printed without supports. On the right side, there's a slot for…
Laburator - Сheburashka Labubu with a minigun lol. Let's get this Labubu thing over with. It's not AI, it's Cheburator! Multi-Color soon
Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…
The print consists in two parts to be glued together, but the whole model is also available. The original 3D files used for this model are available here .
I edited the final release of the Stealthburner to fit the Mosquito Hotejd from my Afterburner. The Assembly and the Heatset inserts are exactly the same as for other Hotends. Edit 30.04.2023: After doing Input Shaping and making…
UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…
3d miniature of the highly requested Nürburgring in Nürburg, Germany! Includes a colorized version highlighting the Grand Prix circuit! AMS and MMU compatible using the .3mf files. I'm primarily a Bambu user so let me know if the MMU file…
My goal was to maintain the eye-catching design while incorporating a better ventilation system. Caution! The model may have some errors or design imperfections. I'm not an expert in 3D modeling. For assembly instructions, refer to the…
This can be printed as two separate prints. You need to enable z-hop (0,6mm is enough). You can enable z-hop only for first several layers (in Super slicer at least). First you print hexagons and on top of that main body. If you z homing…
A simple tool holder for hexagonal deburring knifes with 9 additional blades. This has been modified from the based on the version designed by Jem_3Dprints , with the following modifications: The main tool holder has been adapted for the…
I didn't find a mount for an Adafruit ADXL for the stealthburner which has wider holes so I created this one. You will need 2 M3x60 screws for the mount and 2 M2x8 for the ADXL itself and 2 M2 nuts. I hope it's useful for someone else ;)
BE SURE TO SET CORRECT Z HEIGHT IF USING SEPERATE ENDSTOP. I RECOMMEND JUST USING THE TAP AS THE Z ENDSTOP TO PREVENT INCORRECT Z HEIGHT SETTINGS.…
Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…
famous Air Ship In my model series in 1:1000, the largest airship should not be missing. History: LZ 129 Hindenburg was a large German commercial passenger-carrying rigid airship, the lead ship of the Hindenburg class, the longest class…
Dragon Incense Burner. Make sure to place incense cone atop something non flammable like a large coin. Half dollar works well. This is a finer/detailed version of an older model I made. Suitable for resin printing as well.
The Brandenburg Gate is one of the landmarks of Berlin and one of the most important symbols of Germany. It stood like no other for the division of two states and became a symbol of unity. Its history, however, dates back to the reign of…
Moved to this Page: https://www.printables.com/model/496044-anycubic-vyper-kobra-stealthburner-mod-bowden-and-
My Tool was only some mm longer. Thanks to the supported f2d files i've modified them so you can set some parameters: (len) Length of the box (ToolEndRadius) The radius of the tool end (HolderDiameter) Diameter of the tool holder…
Deburring tool holder with storage for 10 extra blades.
A hamburger that can be used as costers or as a toy for childeren. Standard diameter is 80mm Tags: burger, lettuce, patty, tomato, union, cheese, burgers, food. If anyone has any questions please contact me, THop3D
Burgerpresse mit 200Gramm-Markierung. Das Oberteil und der Griff bekommt je ein Gewindeteil und wird mit einem Gewindestift verschraubt und geklebt. Ich habe das spezifische Gewicht von Hackfleisch gegoogelt und den Durchmesser und die…
Just a quick remix to fit my libraton. * Lengthen the handle hole * Made the tool holder a little bit thicker
Nurburgring Nordschleife, Nurburg, Germany, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Burj Khalifa , the tallest building in the world, 1:1000 scale model There are several 3D models of this building on the Internet, I printed one myself as a gift for my cousin, who was in Dubai and saw this skyscraper. I am fascinated by…
I wanted to made print in magnets so you dont have to click the tools in. I used Magnets ⌀5x1mm. I used this Magnets from amazon. I made a second version on request for ⌀6x3mm magnets. The design is made for this deburring tool What you…
The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…
This shelf bracket is designed to fit the Ikea Burhult shelves( https://www.ikea.com/us/en/p/burhult-shelf-white-80400042/ ) But any shelf with the same dimensions will fit. The screw holes are made to fit screws with a head width of…
Has both the V1 and V2 Knomi. Post your makes for a chance to get featured!
This model is currently for the 1.0 version of the EBB36 board. The screw and strain relief positions changed on the 1.1 & 1.2 versions. The Big Tree Tech EBB CANbus boards are a nice way to cut down on wiring to the toolhead. They're…
I have added two stops to the original deburrer holder so that the tool no longer slips off the fork so easily.
Bob from Bobs Burgers. Updated (1.27.2024) removed old files. added .4 offsets overall to help with thin apron. (thank you Michael Roth)
Use with Ikea Skadis system and T-Clips to mount (see remix section). Be sure to print a T-Clip to go along with this model. After inserting the T-Clip fully, turn the printed model on its side, attach it to the Skadis board, and rotate…
A Deburring tool holder for use on an Ikea Skadis board. Can hold any deburring tool with a diameter of 20mm or less, such as the AFA Tooling Deburring tool. printing with supports is required, and printing with a brim is recommended.…
A deburring tool tray that holds the tool and 15 extra tips. This is a remix of darious' Gridfinity Deburring Tool Holder , modified to hold 15 extra tips.
If you want a model in about 1:300 please uns cura and scale to 0.275. The ship is a Arleigh Burke Flight I ship! Category: Vehicles
The lightest stealthburner fan cover, decreased the toolhead weight. 9/18 Updated step file Print Settings Printer Brand: VoronDesign Printer: Voron2 250 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15 Filament: Other ABS Red Category:…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
Dragon Burner remix for BLTouch/3DTouch. OnShape: https://cad.onshape.com/documents/f649feacb89f1004466cba88 Offsets (from OnShape): X: +32.950 mm Y: -10.718 mm
