Liczymy pasujące modele…
Dimensions (LxWxH) 170 x 69 x 37mm (100% scale) Basic information Prints in place, no assembly is needed. The body is divided into 5 movable segments, which allow a wide range of motion, and grant the model with lifelike feel and…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
An attachment to use with a shop vac with a 35mm nozzle (eg Kärcher, but possibly others), useful for wet cleaning carpet and upholstery. The attachment area is conical so it creates a snug fit. Print with 100% infill, this needs to be as…
Easy to print, tought and compact construction. Unfortunately - it needs supports. But easy to remove. v2: fixed Category: Construction Toys
Keychain with motivation to live every day to the fullest Typo in the model corrected. :) Filament (color) change after the third layer and then filament change after the seventh layer. Print: Layer: 0,2mm Matrerial: PET-G Filling: 15%…
I have all kinds of those pesky carpenter bees flying around drilling holes into everything. I thought I would try to design up a trap like the ones people make out of wood. Mostly to see if I could and to see if a plastic design would…
Designed to fit the 1-7/8" hose on the 4.5 gallon rigid pro pack shop vac hose. Prints without support if you trust your build plate adhesion, otherwise, I used a modifier to add a small strip of organic supports under the overhang. I'd…
SharpGuide: Carpenter Pencil Sharpener Guide This unique 3D-printed carpenter pencil sharpener guide is designed to offer a precise and efficient sharpening experience for two popular pencil sizes—7x10mm and 7x15mm. The guide features…
i needed a new 90 degree square. so a slapped this puppy together. works good. holds a true straight line.
This holder hold two pieces of laminated plates (18mm thick) in right place, before screwing. Print instructions Category: Containers Summary This holder hold two pieces of laminated plates (18mm thick) in right place, before screwing.…
Tools bags! Every carpenters go-to and every apprentices yolk of oppression. It'll print best oriented as is with some tree supports. I used soft PLA for the suspenders. You can use TPU if you prefer, as long as whatever you're using is…
Flying carpet - just wanted to see if I could make one after watching Shimmer and Shine with my daughter. It is probably more inspired by Aladdin than Shimmer and Shine but it is not supposed to be a replica of either. The flying carpet…
A holder for connecting panels (thickness 18 mm) in the right place, before screwing. Precise solutions - perfect connection of the element at a right angle. Window - guarantees perfect flushness of the panels. For strength print 100%…
A 3D model for carpet trimming: a guiding tool that helps you achieve even trims effortlessly. The model can be printed in separate parts (floor and handle), which can be aligned and glued together. Alternatively, you can print it as a…
Mercedes Logo Stencil. Designed for Carpet Pile Finishing, adding customer logo to car mats when finished valeting.
Groupe en pierre d’Echaillon H. 420 ; L. 298 ; P. 145 cm; pds. 18000 kg Paris, musée d’Orsay In 1863, Charles Garnier, the architect of the new Paris Opera, commissioned four sculpted groups from four artists who had won the Prix de Rome…
A holder for connecting panels (thickness 18 mm) in the right place, before screwing. Precise solutions - perfect connection of the element at a right angle. Window - guarantees perfect flushness of the panels. For strength print 100%…
place on carpet and brush carpet pile with stiff crush to leave the M3 sign in your carpet/ car-mats.
This remix has a toothed grip on one side more suited to carpeted floors. Prints on the side (teeth out), like the original, with no supports.
I designed a 40 and 85mm wide nozzle to be attached to a 35mm (outer) diameter (shop)vac. Personally I printed it with 0.2mm layer height and 5 walls. Also, flipped it 180 degrees to have the round sides at the build plate. NO support…
Description This puzzle was an exercise in my apprenticeship as a carpenter, which my supervisor gave me. I was able to practise precise sawing and chiseling with it. In the end, however, it is a tricky puzzle that looks cool when…
Carpenters pencil dispenser, with hooks on the front to store one in use. Hopefully then they wont keep going missing! Designed for pencils 177mm x 13mm x 7.35mm 7" x 1/2" x 1/4" Message me if you want it to fit any other dimension…
Update 2021/04/12: Uploaded new version v3: Removed magnets, tighter fit for clip Up on request a friend of mine wanted a holder for his carpenter pencils as they fall down the deep folding rule pocket when they are getting short. Velux,…
This is a compact and efficient vacuum cleaner nozzle, designed with a focus on versatility and convenience. This Model is available in 3 different lengths. 100mm, 150mm and 200mm. Every Version features a 20mm x 100mm opening at the top,…
It works with most of this type (like on pics) carpenter's squares Screws from top are M4 size, to reduce looses if your carpenter's square is lower high. It don't have to be headless screw. Can be ordinary M4 or imperial size replacement…
Carpenters knot also known as Zimmermannsknoten is a set of 6 interlocking parts originally designed by Japanese carpenters to securely fuse the intersecting wood structures when building rooftops. Building these knots is complex and has…
A holder for connecting panels (thickness 18 mm) in the right place, before screwing. Precise solutions - perfect connection of the element. Window - guarantees perfect flushness of the panels. For strength print 100% infill. No supports…
Remix of the Vacuum Nozzle by @3d7r1x to 16cm intake width for much speedier work on large carpets and textile furniture. Stabilizers added to prevent deformation of the nozzle from suction forces. Printing Advice: Bed Adhesion : Use a…
I saw a tool like this on ebay day before the competition started and thought I could use that stand added it to my wishlist thinking of buying it at some point and then this competition showed up and I though why not to make it myself. I…
Seized carpet beater bar on your one+ ryobi stick vacuum? This is the part you need. Grab a 5mm inner bore, 16mm outer diameter bearing that is 5mm thick. Use some implement of destruction to separate the green thing from the gray thing,…
Since I like my Pica pencil with the holder, I wanted the same concept for my NicPro Mechanical Carpenter Pencils. There are two versions. Clip Sheath - This design has a sheath for the pencil clip to slide into. It is sightly longer than…
Zunftzeichen Zimmerer
All the other door stops I found were either too big, or would take way too long to print and waste filament. So when in doubt. FTIJPI I made sure to put some grip on the bottom so it doesn't just slide across the carpet and can confirm…
Original carpet clips broke. Created this replacement. It has a different clip-together design than the original dealer supplied carpets. There could be room for improvement but this first version worked for me and is holding the carpet…
Tired of your speed or carpenter squares laying around or falling off weak hooks? This universal holder is designed specifically for DIYers and Woodworkers looking for a clean, secure, and permanent tool organization solution for their…
Door Wedge for carpeted floors. Category: Household
Gridfinify - 90 Degree Positioning Squares Right Angle Clamps Woodworking Carpenter Tool Holds 4 x Positioning squares and additional storage in the center
Strumento da falegname per tracciare righe seguendo il profilo.
Carpenter Pencil Sharpener and Offset Block Easy forming a perfect sharp tip on your Carpenter Pencil can also be turned around and use it as an offset Block.
The parts may need some adjustments (small scaling) to fit properly in existing clip in a car (depends on your printer). My advice, print first the top part and check if it fits in the car. Then print the bottom part and check if it's not…
Beware the seemingly innocent rug that lies in wait, for this is no ordinary floor covering! The Animated Carpet, also known as the Rug of Smothering, is the ultimate home decor gone rogue. With a flair for the dramatic, this enchanted…
I was looking for a door wedge that could securely hold and grip itself to the carpet flooring, but I couldn't find any that were specifically designed for this purpose. So, I decided to create my own design with ridges that could grip…
Multiboard holder for a Carpenter's / Mitre square (universal). This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The…
Pencilholder for the cheap carpenter pencils. I based the outline of the design of the Pica Dry holder. Print in any material. I used PLA, but PETG should work also. (even better) Print with brim. No extra supports. There is one tiny…
Caster wheel stops for carpet so you can play racing sims with wheel and pedals. With all my force, they will tend to slide a TINY bit, but i am talking full force, probably 3x what brakes need. i might redesign them with better carpet…
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
For 17 mm wide folding ruler. Grease a little before assembling for the first time. Supports: No Resolution: 0,12 - 0,16 Infill: 30
I saw another model (https://www.printables.com/model/400968-wall-holder-for-carpenters-ruler) which gave me the idea for this, but I found it too bulky and it also needed a lot of filament for what it is. So I designed this from scratch,…
Simple tool, easy to print.
A simple carpenter's square marked in millimeters.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Primarily designed for carpet knives, but tried also with half round file and also OK. Primárně navrženo pro moje lámací nože, ale možno dosadit například i pilníky apod.
A simple tool designed to assist in sharpening carpenter's pencils. Use a blade and glide it along the tool as a guide to sharpen each side. Begin by sharpening the wide sides, then proceed to the narrow sides. P.S. To accommodate shorter…
I included two types with the logo: embedded (print face-down and let the filament bridge the cavity) and embossed (print face up, with supports, allowing a filament color transition for the top layers of the logo). The Lotus logo is…
Threaded screw on replacement mat/carpet clips to fit a Hyundai i30 Sedan/Elantra with the hook style fixing. As it has a fine screw thread, recommend you print it at 0.10mm layer height.
Carpet and lino have very different thickness, so doorways use a carpet gripper to create a neat join. Unfortunately, this creates a ~12mm barrier that hinders the small wheels of a walker or light wheelchair. This design is a simple ramp…
I would like to publish my take on the mechanism behind (actually, under) the walking table designed by Giliam de Carpentier. I have been playing with Fusion 360 and various linkages for couple months when I saw a video of Carpentopod…
Nails on the bottom of the Model hold the door step in place
Modified the Multiboard Ruler Mount by xander https://www.printables.com/model/708768-multiboard-ruler-mount Increased holder width to 2.5mm to hold ticker carpenter square/ruler or any other small flat tool with hole mount. Fits in…
Here's a few reasons why you may NOT want to 3D print your own shims, can you think of any more? Dimensional accuracy of shop-bought shims is better (do I care?) Shop-bought shims are about 2% cheaper. Last year they were about 30%…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Infill : 100% No support needed Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: textured…
Carpet gripper for Logitech/Saitek rudder pedals. Print 2 or 4, goes into mount holes (the fit is rather loose). Attach with double sided tape.
A simple and effective anti-slip device for office chair mats in carpeted rooms, about the size of a quarter. Not much more to say, really! Print as many as you deem necessary, and glue in place on the underside of your floor mat
A wall mounted holder for a carpenters ruler. Mounts with four screws in countersunk holes on the backside, through the front openings. Maybe a little resizing is necessary for different brands of rulers. Printed with PLA, infill 20.…
These set of bins were designed for the “Hiboom 2 Pack Solid Carpenter Pencil with Lead Refills” set from Amazon. I am not sure if the slots will fit for pencils from other brands.
Gap 1mm-5mm Precise spacers for adjusting fronts ensuring a perfect fit. Even gaps, perfect alignment of fronts in furniture. Ideal for both DIY and professional furniture makers.
These are models of anti slip pads that works especially well on carpets. Tested in car :) There are also models of leveling pads if you need so. Feel free to clone and update this project if you need different sizes.…
It holds a regular pencil and a carpenters pencil for quick dispatch just add some 1" double sided tape to the back and stick it where ya need it. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution:…
With this guiding tool, the trimming process of your tufting projects is significantly simplified, allowing you to achieve even and clean cuts effortlessly. Based on your experience, adjustments can be made at any time to further optimize…
náhrada poškodeného kobercového klipu pre Alfa Romeo 147 pred FL . Vytvorené vo FreeCAD. protikus “Carpet Clip” je na stiahnutie na Thingverse
One of the reservoir caps got lost in a move and it's easy to splash water or cleaning solution when using the carpet cleaner without it. I'm still very new at making anything and this was made using TinkerCAD. I'm pleased that it's…
Designed for 18 mm thick board. Front raised by 1 mm Furniture front assembly tool This makes cabinet door assembly child's play The template is equipped with a support arm that helps hold the door with one hand, while the other hand can…
What is this ? This is a ramp made specifically for my vacuum cleaner, it could not climb up a carpet that is ~ 24 mm in height, so i made a ramp that i stick to the ground, this ramp will stick to the carpet threshold ( the golden thingy…
Twist Lock carpet clips with washers (especially for BMW E46) It's better to print with supports.
I needed an extremely simple block that fit snugly on a standard carpenter pencil for scribing offsets quickly. With a sharpened point, a pencil already has two offsets, this gives you another 4. Print Settings Printer Brand: Creality…
I found the model by @Sebastian_57252, but it was for (apparently) European carpenter pencils. None of mine remotely matched the size of his original model, but since it was distributed as a Freecad model, resizing was easy. I modified…
Three different pencil holders that can be screwed directly to the wall or screwed to a french cleat strip. Each of them are slightly different sizes: one for regular pencils, one for cheap mechanical pencils, and one for carpenter pencils.
This is for the Brother Sewing machine foot pedal model T when used on carpet to stop the pedal sliding around in use. (Not suitable for hard floors). Print, place the pedal in and go, if it's going to be permanently used then a little…
These spiked feet improve the stability of the Fully Jarvis Standing Desk by redirecting more of the weight of the desk past the carpet and into the sub floor. How I Designed This Category: Office
This Is a Pencil holder I designed for myself to make my fabrication processes more efficient. This little gizmo is one of my favorites and has solved the “misplaced” or "I lost my pencil" frustration while building. Add a Jump ring to…
Printing For stability use the following settings: PCTG or PETG for 0.8mm nozzle: 4 walls/perimeters 25% honeycomb infill for 0.4mm nozzle: 8 walls/perimeters 35% honeycomb infill In the .3mf I actually cut the model into two parts and…
Overlook Hotel Carpet Tile. Inspired from the carpet pattern in the classic movie “The Shining” 3 color parts to make each tile. overlook_tile_blk / overlook_tile_ora / overlook_tile_red Support needed under the tail end of the black…
A fence that can be attached to a carpenter's square, to give it a bigger face to put against an edge that you want to be square to. This is similar in concept to commercial fences like the Lee Valley Veritas Square Fence. Those are…
This is a parametric/customizable wedge to fix parts in place, gently tap the wedge in place and break off the excess part you don't need. The photos show the use of such a wedge to fix the drainpipe in position. The design is made in…
3 different ways to put carpet knife to your Biltema pegboard. In Biltema pegboard holes are 4mm and 12mm abart. Biltema operates in Skandinavia, but there are other brands with same dimensions and you can also screw directly to wall.
The car have been designed by Captain JimiPie. Please refer to this Thingiverse site https://www.thingiverse.com/thing:5547978/files. Thanks Captain JimiPIe for this very nice model. I only designed carpets and motor ventilation slots to…
here are the files for Carpe Noctem A Vampire head mounted on a religious relic, a trophy from the war to Seize the Night from the forces of darkness. the Head needs a support but the base will print with zero support. the base was also…
https://www.aliexpress.com/item/1005005642898265.html?spm=a2g0o.order_list.order_list_main.29.4e661802C9ymvP
Replaces carpet clip on many GM cars and SUV's
This keychain is inspired by the pattern of the carpet in the movie „the shining“. it is split into 3 seperate models so you can print it in multiple colors. The insets fit perfectly into the base and can be glued into it. I recommend to…
Simple hole that keeps the ball from running out the back too easily. If the ball is hit with a speed that it would drop in regulation hole it should go in with the design. You will need to print the retaining ring and 20 of the bars. The…
A detailed statue of Saint Joseph represented with his traditional symbols: a carpenter’s hammer and a bouquet of lilies. The hammer symbolizes his work as a carpenter, while the lilies represent purity, faith, and devotion. The model…
Carpenter's hammer holder for ikea skadis pegboard
Print one of these per pedal to help them grip the floor if they are placed on carpet.
Have doors that like to close that you want to keep open? Stop that door. 100-mm long, 50-mm tall and 50-mm wide. Fill percentage, material, and layer height are flexible. Units shown are Hatchbox red ABS at 0.35-mm layer height and 50%…
I designed the carpet-holders for many cars of the Volkswagen Audi AG. The original parts are made out of PA6 Nylon. the prototypes in the pictures (see 1&2) are made out of PLA because i just wanted to see how they would fit. I will make…
![Robot vacuum carpet ramp [parametric]](https://media.printables.com/media/prints/463370/images/3808577_9909d189-2025-47bd-b56a-2d30a4a23920/screenshot-2023-04-27-190240.png)
