Liczymy pasujące modele…
This should work for bikes with the 8.5" or 216mm spacing between windshield mounting brackets and 40mm hole spacing for the M6 bolts. Remove the old brackets completely. Print solid with all perimeters. Suggested settings for 0.4mm…
The OEM rubber piece of the indicator/turn signal becomes brittle over time or crack when you hit something. You can fix it with ductape (will hold 200 km/h) but it's not ideal. So I made a replacement piece. The rubber piece will fit the…
simple mod for my honda cb500f
The intent is to prevent water and debris coming off the front tire from hitting the radiator. The first version can hit the back of the fender on hard bumps. Added a second version that lifts the front of the deflector up a few mm
Sized to fit Honda SCL500 but should fit other bikes that use same rear brake fluid reservoir. Support material required for the window. Doesn't use much and this should be a quick print. I don't think you need consider ASA. You can use…
A simple bracket to get a flat surface for mounting an TPMS display. You need to replace the original screw with a longer one, a M3 30mm should be fine. Turn it 90° and print on the side, so you won't need any supports.
Needed to have something to mount auxiliary lights to the crash bar of my Honda NX500. They needed to fit the 3" Nilight Light Pods to the bars with a 145° inward, and 170° downward angle. I ended up with this design that accommodates the…
Universal tablet mount for Honda CB500X model 2013-2018. The mount allows attaching any cover of any tablet. It is recommended to print on material with some flexibility. Required: Simple case for your tablet 2x Screws 2x washers 2x…
Mounts to fit a lightbar to the crash bars fitted on a cb500x. The light I used is a Lightfox 6 inch lightbar which I used the extended mounts on. I added strips of duct tape to the inside of the mount that makes contact with the crash…
Filter that I used: https://allegro.pl/oferta/filtr-powietrza-honda-gcv135-gcv160-gx100-17380357043
Adapter for covering the hole and mounting non-OEM flashing lights, such as the ones shown in the pictures. Designed to fit a Honda CB500F (2017 model), will fit most Hondas. Consists of 2 parts : one inside and one outside. Works for…
Modeled for 1972 Honda CB500k1 Four, might fit other year cb500's or cb550's, idk you'd have to check. No way endorsed by or claims to be original Honda part or design. Bracket that utilizes original mounting location and the weird bolt…
If you put pods or stacks on your bike and no longer have a need for the stock air box housing but would also like a little storage on the bike the go ahead and print this! It fit on my airbox very very snugly but there is also a groove…
Adapter for covering the hole and mounting non-OEM flashing lights, such as the ones shown in the pictures. Designed to fit a Honda CB500F (2017 model), will fit most Hondas. Consists of 2 parts : one inside and one outside. Works for…
If you put pods or stacks on your bike and no longer have a need for the stock air box housing but would also like a little storage on the bike the go ahead and print this! It fit on my airbox very very snugly but there is also a groove…
I designed this license plate bracket for my 2022 Honda CB500X. All of the other frames I found covered important information on my plate. This one doesn't cover anything. It's also notched because the metal mounting bar was interfering…
Wanted to mount my Insta360 Selfie-stick to my motorcycle's crash-guard. I designed these mounts to fit my Honda CB500X/NX500 crash guard, but it should fit any other crash-guard with standard 1 inch tubing. The mounts clamp both guard…
Removing the oil-filter on a Honda NX500/BC500X can be messy. You have the potential that oil will all spill on the exhaust when removing the filter. This funnel will eliminate this. It clips on the protruding ring on the casing, allowing…
Adapter brackets for fitting a Blueskysea DV128 Dashcam to a 2019 Honda CB500X.
