Wyniki wyszukiwania: cmi

(Tested) Doppelgewindeadapter GCMI-Gewinde (Flaschengewinde) 28/400 auf 20/410 - Double Thread adapter GCMI Thread (Bottle Thread) 28/400 to 20/410

Engish below Deutsch: Ich habe eine Desinfektionsmittelflasche auf der ich einem größeren Sprühkopf montiert habe, Mein original Gewindeadapter ist aber leider nach und nach gebrochen. Natürlich wäre es wahrscheinlich einfacher eine neue…

Apple MacMini Wall Mount

Wall Mount for Apple MacMini

wooden Corble CNCmilling woodcarving Bookstand

Have Fun whatever you use it for

Tyler, The CreatorCMIYGL Keychain

Tyler, The Creator "Call Me If You Get Lost" Keychain. Feel free to request any more keychain ideas. Thanks

macmini m4 vesa 75x75 mount

remixed the model to mount mac mini and monitor on the same arm

Autel VCMI+ EVDiag Box Handle

My main goal for a handle was that i could mount and dismount it without destroying or drilling a hole in the VCMI. Despite that Snap-fit design it has plenty of grip on the VCMI. To accomplish that grip i did make it pretty tight. So…

Apple MacMini 2014 - Box for DVD drive USB

Box (rámeček) pro DVD mechaniku pod Apple Mac Mini 2014

Porte carte CMI

a coller avec du double face sur le parebrise

MacMini M2 under desk holder

For printing, mirror it in slicer. prints fine with 3 or 4 walls and 0.2mm layer height.

MacMini + Ipad Pro 11" Vertical Stand

VERY rough and basic vertical stand for the latest gen Intel Mac Mini, as well as an iPad Pro 11" in a Zugu case. At some point, I am going to redo this in Fusion360 and filet the corners as well as smooth out the curve around the base of…

Stand MacMini M1/M2 Cooling Fan and stackable

The stand makes it possible to stack M1/M2 MacMini and same size USB hubs or external drives. You can install an 120 mm fan with the Fan Plate. The cable can be routed through one of the hex holes. If the plug is too big and you're not…

MacMini Dock-Fixator

Mit diesen einfachen 2 Bügeln kann man die Dockstation auf dem MacMini rutschsicher anbringen! Jetzt sind zwei Versionen verfügbar :-) Zudem lässt es sich schnell mal eben drucken ;-) PS: Vielleicht passt es auch beim MacStudio?!

Kaka 22 AcMilan - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 101x170mm in size Filaments Used: PLA+ Sunlu Black PLA BambuLab Basic Red PLA+ Sunlu Gold This print uses 3 unique filaments Swap Instructions:…

Madlo stolní pila CMI C-TKS 1500-75ECO

Náhradní madlo k nastavení výšky kotouče

Vacuum Hose Adapter for OBI-CMI circular saw (35mm int to 30mm ext)

I was sure that someone have already thought about an adapter like this :) Thanks! Customized version of http://www.thingiverse.com/thing:1246651 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1246651…

Fan stand insert for CMI Fan / Ventilator Standfuß

This is a stand insert i made for my CMI FD-40LII Fan. I got it with no inserts at all, so i couldn't take any measurements from the original ones. I made these from scratch. Might fit for other fans, too. Approx. measurements of the part…

Watertank for wetgrinder (Pattfield,CMI, other blacklables)

Watertank for wetgrinder (Pattfield,CMI, other blacklables) Description This is a replica for the watertank of the common balcklabeled wetgrinder like Pattfiel, CMI, Einhell, Scheppach and so on. Printing: I recommend using PETG with 15%…

Soporte macmini pared

Se hacen tres soportes top, y uno back, está pensado para atornillarlo a una madera , y después la madera a la pared.

AcMilan Logo - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Red PLA+ Sunlu White This print uses 3 unique filaments Start with Black At layer #12 (1.04mm) swap to Red At layer…

Ian McMillan's Homeward Bound

The Yorkshire poet, radio celebrity and creative genius that is Ian McMillan has a running joke that at whatever train station he is at, that was where Paul Simon wrote the lyrics for "Homeward Bound". Widnes Railway Station has a plaque.…

MagicMirror RIBBA covers

I have a MagicMirror which is built into a 7x50cm Ikea Ribba frame. I wanted to upgrade the MM with a Grove gesture sensor to control it (PAJ7620U2). But as the frame does not provide any good options, I designed some covers which can…

McMillan TAC 50 (almost)

MacMini vertical 'clipstand'

MacMini's can be useful development/server hardware, if it were not for just how hard they are to deal with in racks. This clip solves some of that; at least preventing it from falling over. This clip is designed to support the MacMini so…

Marco Van Basten - AcMilan - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA BambuLab Basic Red PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions:…

Basic Stand for MacMini M1/M2

This is a very basic stand for M1/M2 MacMini. Just enough to lift the mini out of the danger zone when spilling a drink.

MacMini Mount for Voron 2.4

I kept getting Timer Too Close errors on my RPi 4 with a BoxTurtle. I had a spare Mac Mini that wasn't really being used, so I installed Linux Mint on the machine and used it as the primary Klipper machine. I wanted a way to mount the…

MacMiniM4 Front Rise

Are you having trouble with your Mac mini M4 with a hub/stand having ports that are too low? Here's a simple solution: a raised front panel for your Mac mini M4. I recommend securing the raised panel with double-sided tape. If you like…

Andriy Shevchenko AcMilan - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 120x170mm in size PLA+ Sunlu Black PLA+ Sunlu Grey PLA BambuLab Basic Red PLA BambuLab Basic Beige PLA+ Sunlu White This print uses 5 unique…

MagicMirror frame parts for Lenovo Q24i-1L TFT display by Nerdiy.de

Create a professionally assembled MagicMirror with this high-quality 3D-printable frame parts. This set contains the STL files for the frame parts, which were specially designed to hold the Lenovo Q24i-1L TFT display, a Raspberry Pi 4B,…

MagicMirror frame parts for Xiaomi A24i TFT display by Nerdiy.de

Create a professionally assembled MagicMirror with this high-quality 3D-printable frame parts. This set contains the STL files for the frame parts, which were specially designed to hold the Xiaomi A24i TFT display, a Raspberry Pi 4B, and…

Apple MacMini 2014 - Box for DVD drive USB

Box (rámeček) pro DVD mechaniku pod Apple Mac Mini 2014

MagicMirror frame parts for Lenovo Q24i-1L TFT display by Nerdiy.de

Create a professionally assembled MagicMirror with this high-quality 3D-printable frame parts. This set contains the STL files for the frame parts, which were specially designed to hold the Lenovo Q24i-1L TFT display, a Raspberry Pi 4B,…

MagicMirror frame parts for Xiaomi A24i TFT display by Nerdiy.de

Create a professionally assembled MagicMirror with this high-quality 3D-printable frame parts. This set contains the STL files for the frame parts, which were specially designed to hold the Xiaomi A24i TFT display, a Raspberry Pi 4B, and…