110 modeli
Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
Hello! This is a dual port compensator for WE Tech / SOCOM Gear 1911 Airsoft pistols. This compensator replaces the factory barrel bushing which allows the barrel to slide through the compensator, as well as sit flush with the slide. I…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
A simple, but carefully designed test model for tuning Small Area Flow Compensation in your slicer. A companion spreadsheet is included to assist in manipulating the Flow Compensation model. Original post-processing script by Alexander T.…
The extended handle version can be used not only for the rear left bed level point but as a regular shim as it is more convenient to install
This model is used to find the settings for X-Y hole and contour compensation. After printing measure the dimensions of the outside rectangle. Subtract your printed dimensions from the actual and divide by 2. This number will be your new…
Print, Measure, Save your values to slicer & print dimensionally accurate forever.
Why calibrate Elephant foot compensation at all? Well, I have to admit that I used “standard” values for EF compensation for years. But I stumbled over this matter when designing my printed pinhole lens where I use the EF compensation…
Compensator for the glock Print Settings Resolution: 0,16 Infill: 10 Category: Other
To print accurately measure and calculate shrinkage of materials. Do not change e steps of measured parts. Simply print it then measure it and let Excel calculate XY shrinkage and hole compensation. Then type calculated values to your…
Fixed the glock compensator (wasn't slicing properly in Cura) and made the rail attachment stronger. Print instructions Unassociated tags: John Wick Category: Sport & Outdoors
Höhenausgleich für das Nähen dicken Stoffes damit der Nähfuß nicht so stark kippt und leichter auf den Stoff fährt. Die beiden Teilen klippen zusammen. Height compensation for sewing thick fabric so that the presser foot does not tilt so…
some fixes more sturdy rings for better grip in plaster better printable no support needed any more based on Putzausgleichsring-Fabrik -- spacer for pattress box factory https://www.thingiverse.com/thing:4332330 by Johann_LA May 02, 2020
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
I needed a set of brackets to run the input shaping tests on my Ender3 V3 KE, and Creality makes you sign up for an account… which bugged me. So I signed up, downloaded the files, and I'm posting them here in case anyone needs them. Lord…
Hello, this is my compliant XY compensation device. It has a theoretical compensation stroke of 4 mm and is a further development of the XY Linear Guide . It is useful if you're e.g. a student and want to experiment with robotics. It does…
Although both pistols are from the same manufacturer and share the same characteristics, there's a slight change in aligment, hence the two versions. It replaces the piece at the end of the barrel. 3 seconds to swap on the R27 but it…
Remxed to fit a UMAREX VP9 airsoft gun.
Compensator from the movie "The Professional" for my Halloween costume. Not exact, but close enough. Made to fit cheap but realistic $20 airsoft beretta https://www.amazon.com/gp/product/B005116PFM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Most FDM printers will make parts larger than they should be in the X and Y directions. This "XY expansion" can be undone in your slicer settings, but it is difficult to know exactly how much to offset this expansion. This is where the XY…
Wer kennt es nicht, da wird ein Loch mit einer Lochsäge vorbereitet und die Hohlwanddose hält, weil das Loch etwas größer ist. Dafür gibt es Ausgleichsringe wie diesen. Einfach darüber stülpen und schon wäre ein Problem gelöst.…
English: The height compensation tool makes starting on thick fabric edges or sewing over thick seams a breeze. The presser foot is no longer uneven, so the seam is even and transportation is optimal. The tool has a thick and a thin side…
A print to check the effects of ‘Hole Horizontal Expansion’ (Cura) / ‘X-Y Hole Compensation’ (OrcaSlicer). The rectangle should measure exactly 100mm X 30mm. Holes are 25mm, 20mm, 15mm, 10mm and 5mm. Once printed, use a pair of calipers…
This model is a test print to test if your elephant foot compensation settings are working properly. This design has varying interior and exterior angles which makes it perfect for elephant foot testing. PRINT SETTINGS: Bottom Layers: 3…
My mother, sister, niece do sew all and much. Ma asked me a while ago if I could do something like that. I could and she was happy. I just forgot to publish this little tool. It was only 1-2 years ago ;-) I printed this with a 0.4 mm…
* Note this 3mf file should be printed with SuperSlicer! This model contains all settings and parameters suggested by Klipper official docs . Suggested layer height is 0.2 or 0.25 mm. Infill and top layers can be set to 0 . Use 1-2…
These nut inserts/addons correct the pitch of the open notes, making tuning easier and intonation more precise. This is a prototype and it works for me. YMMV, edit the source code to adapt to your instrument. There's one macro for…
Most FDM printers will make parts larger than they should be in the X and Y directions. This "XY expansion" can be undone in your slicer settings, but it is difficult to know exactly how much to offset this expansion. This is where the XY…
This is a remix of https://www.thingiverse.com/thing:5470246 but I cannot tag models from a different website. I noticed Chisato's compensator had fewer, but longer spikes on the front and ports in the top hexagonal section. So I made a…
Just a fun thing for the gun. With rail for attachments. Print Settings Resolution: 0,16 Infill: 10 Category: Other
Model is print oriented and doesn't require support. Should fit tightly over the original boxer muzzle. I included a fitment test that I recommend printing first. If too tight or loose, adjust the scale of the compensator in your slicer.…
Sight rail mount printed out of PLA with 50% infill. Compensator printed out of ABS like resin but could also be printed out of PLA. Used 2 M3 X 30mm screws to attach sight rail mount to compensator. On closed side of sight rail mount…
Custom compensator for UMAREX P99 DAO airsoft pistol, i just made something i liked the look of, it is not really based off of any real compensator. Needs an M4 nut and screw (i used nylon screws), i also removed the orange tip from mine…
UPDATE V2: Added small indents on each side of the barrel to give the darts more space to stick out. This is a remix of deusnefum's uncompensated hammershot mod that's made to work with hitchhiker4200's in-line cylinder. There is also a…
Earlier posted "Rotary Magnet Dispenser" had a magnet gauge to determe the magnet thickness. Reworked better version! As my "Rotary Magnet Dispenser" consists of different pieces (30° and 45°) "cake" segments, because of tolerances and…
Notes: I lost or gave away my compensator, so I used some image references online to create a similar one with my own style. The gas port slots go all the way around, but only the ones on the top 180° are open to the inside. The bottom…
Prints well in PLA+ You will have to remove a thin layer from the inside for it to fit the barrel.
This is for fine tuning the elephant foot setting for profiles in Prusa Slicer. The squares are labelled with the elephant foot value being used for it. This helps with setting the right values in the slicer and for keeping track for the…
You need a silencer adapter in order to screw it on Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: No Category: 3D Printing
It will fit the 14mm CCW thread. 32mm outer diameter. To be printed vertically on front, without support Some materials have different shrinkage factor, and and printers have different flow settings, please make sure that your printer is…
When I was planning to mount my Skadis pegboard onto the wall in the garage, I discovered, that it is quite hard to drill the holes in the exact correct position. The Skadis pegboard already offers a compensation in the vertikal…
Kill two birds with one stone for your new filament: maximize its print speed and ascertain its shrink rate. Do it all with less an hour of print time and no math required on your part. What is this for? These tests let you determine the…
Mock compensator for airsoft Glock. Specifically modeled for the G19 with a cow-cow threaded outer barrel. The threads are 14x1 left-hand. This is not a real comp; this will not alter a real firearm's performance in any way. It is for…
Z Axis stop compensates for glass build plate thickness. Little to no bed leveling when installed. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Hatchbox PLA Any…
Print front facing down, use supports. Use plenty of bottom layers to prevent damage caused by potential hits from BBs. The compensator is attached to the barrel with the thread protector cap that comes with the replica. Unscrew the cap,…
This is a dummy compensator for the airsoft Mk23 to hide a slightly extended innerbarrel, that sticks out about 35mm Requires an M4 grub screw to lock in place. You should just be able to create the threads for the grub screw, by screwing…
I designed this Trivictus Whispercar cosmetic mod based on the real-steel Strike Industries OPRESSOR blast shield/linear compensator. I printed it on my Bambu Lab P1S in BL black PLA Tough+, with a layer height of 0.2mm.
I wanted a compensator that both wouldn't explode and would give me some muzzle climb reduction when shooting at high rates using binary triggers. There are no threads on the inside. I heated up the threads of the barrel and then screwed…
Prusa Mini - compensation of perpendicularity - axes X/Y
Modular holder / storage /organizer for rifle and pistol barrel thread caps / protectors, compensators, suppressors etc. This is a modular design so you can pick from the available supported threads and then screw those into the thread…
Simple Calibration tool Take 20 - 30 min to print both Note: Compensation Calibration value that you measure should be divided by 2 Website (That I think would be useful): https://makerhardware.net/steps-per-mm-calibration-calculator/
take a Measurement for the 20mm or 10 mm hole then write that down then use this formula ( the size it should be - the Measurement you made)/2 = xy compensation
Compensator designed for the new ASG CZ Scorpion AEG. Link to Magazine Plate (mag pull): https://www.prusaprinters.org/prints/35235 Link to PEQ/Battery Expansion: https://www.prusaprinters.org/prints/35233 Link to Tracer Cover:…
Hello, Today I have an Airsoft Mp5 compensator for you. It is suitable for the Mp5 from the Cyma brand, but it should also fit other brands. It is a quick-release compensator, so it is installed over the original diffuser and locks with…
Remix of Silly's Trivictus Scar. His are designed to shoot rocket darts off the tip, but, alas, I have none. (There's just no modern way to fix that unfortunately.) And so, I have remixed his utilitarian model into ones that give your…
Friction fits on a standard 16mm hobby barrel. There's a flash hider, a muzzle brake, and a pistol compensator.
The joint of the original model by Robin didn't turn out very well on my printer, so I replaced it with a 3x18 screw.
Mit diesem Stufenring kann man einen Tisch oder Grill oder sonstigen Gegenstand mit Füßen gerade ausrichten. Er ist sehr gut geeignet für Garten Camping oder Biergarten, wenn Gegenstände mit Füßen oder kleinen Rädern eben ausgerichtet…
Credit goes to https://www.printables.com/@ThompsonStudios https://www.thingiverse.com/deusnefum/designs My tweaks/contribution here is very minimal. Also take a look at the various Hammershot cylinder options of Radioactive:…
This is for SuperSlicer only! This test model consists of two parts, one where the diameter increases linearly from 1mm to 10mm and one where the cross sectional area of the hole increases linearly from 10mm^2 to 100mm^2. I have also…
The gap between the Wasatch Arms compensator and the front of my trigger guard was bugging me, so I created a snap-on insert to fill the gap. I made it out of ABS; you can use PETG or even PLA, though PLA will sometimes break while trying…
Resin print recommended, but can be done on FDM. Fits perfectly the barrel of Juri's model @3dworkbench
First attempt on making a fully customizable compensated saddle. It's not ready so the edges are sharp, I recommend using 100% infill and a sandpaper to smooth the corners. v2: Now you can set saddle height at first and last string Set…
My approach to absorb the wobbling of my lead screws at my CubeAnet8 https://www.thingiverse.com/thing:4804870 using the very basic Anet A8 lead screw, I came up with this design. I now created a generic version and included the FreeCAD…
Remix of Silly's Trivictus Scar. Is it subtle? No. Is it streamlined? Not really. Does it look like it go ka-boom? Yes. I printed this with the Non-threaded end on the heat bed. Recommended 5 walls, 25% Infill, Gyroid. (You can probably…
The current version is inaccurate due to printer tolerance. This corrects for that.
Use this model to calibrate "X-Y hole compensation" and "X-Y contour compensation" slicer settings. You can use it with different materials (inner and outher parts).
Compensator is for 14mm threaded airsoft barrels Both iron sights and charm can friction fit on picatinny rails but also include holes for 5mm bolts Recommend printing the thread tester first to check the fitment and later scale it for…
As I also wanted to place the stickers next to the panels, I made a height compensator so that the stickers lie flat.
Splitting the bottom uncompensated filler piece into two allows more forgiving tolerancing when shaving down the cut lines/hole IMO, as you can cut a little further for a loose fit, then superglue the halves into place in their respective…
(On hold - this works, but I've found that it need extra epoxy reinforcement, the bolt is insufficient to stop the inserts from sliding out. Working on a fix.) Uncompensated back and front pieces allow you to use an extended cylinder by…
A model to calibrate the precision section in slicer for making accurate and precise parts with a fine tolarance. A brick 50x100x20mm cube with a Ø30mm hole in the middle. A contour for dialing in the X-Y Contour Compensation. A hole for…
The main purpose of these arms is to reduce z-wobble artifacts on V-Core 3 printers due to bent or not perfectly aligned leadscrews. It uses a printed acme 8x4mm nut, which is integrated into the arms. My idea was to use the natural…
The Typhoon Compensator is a custom muzzle device designed specifically for the Novritsch SSP18 (and other airsoft pistols with 14mm CCW threads). Since this is a functional part that may take impacts, I recommend the following settings…
The Overcompensator Kit V1 is a pistol grip and stock conversion for the Nerf Titan CS-50. All parts fit the Titan shell without cutting, however rewiring the blaster is required. Fasteners and instructions will be uploaded soon.
This is a humorous entry. Do not use it as a medical device. Do not put it on a real item. Fits G17 snuggly. Photos made with training rubber-bullet model, so dimensions are slightly off at the end of barrel. Split STL to parts, print…
Thought I would try a different approach to a compensator, so have made it vent at the front Print Settings Rafts: Yes Supports: Doesn't Matter **Resolution:** .20 Infill: 50% **Filament:** Ender PLA Grey or whatever you prefer Notes:…
Basically, Marlin has a option where you can compensate for the skew on your X Y rods. Using a pair of calipers and following the maths on the Marlin Configuration.h file, you can compensate for your hardware misalignments. However, it is…
My MPCNC had noticeable backslash on Z axis, so I added same lead screew nut to the bottom of Primo core. This model is created in FreeCAD and project file is available for download. Should be printed from PETG with layer height 0.2mm.…
A box to organize and stow a a Pi Pico and ADXL345 resonance compensation kit for my voron, following the Nero3d tutorial below. I put a voron logo on it, but I am also including a blank version of the lid. The photo shows a rectangular…
I made this once I saw the download, and I knew it would make a compensator. comment, make, and tell me what you want!
3 designs and 1 blank for development and remixing. Super easy to install and no interference with the holster and battery. I recommend printing the main piece muzzle-down with supports for the shoulder in the screw hole, then after…
IKEA Mosslanda 0.5 to 2 cm height compensation 9.9 cm long and wide for better fit.
Z Axis stop compensates for glass build plate thickness. Little to no bed leveling when installed. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Hatchbox PLA Any…
Bed_Y-Tilt Compensator for Z-Axis for MK3S/S+ I made this because my bed had an inherent tilt around the Y axis and even with my bed leveling in place I wanted something to correct it. The Z calibration upper reference points are the…
This is a mounting block for the Parker Mountain Machining Compensator. This was originally made for the Walther PDP comp, but may work with other compensators of similar size. Recommend printing this with a high infill, and a strong…
Summary Custom-designed spacer set for the Sovol SV08 Max to accommodate 2mm foam sealing tape installed between the chamber door and frame. This modification significantly improves heat retention by properly sealing the chamber while…
If your door isn't thick enough to accommodate a Thirard brand door viewer (30mm to 52mm, diameter 16mm), this compensator makes up for the missing thickness. Printed in PLA, the model takes less than 15 minutes to print. I provide the…
Leg shortening compensation with 2,8mm high. Bein Verkürzungsausgleich mit 2,8mm Höhe. Print with TPU and 50% infill. Mit TPU drucken und 50% Füllung.
This is a 3D model for a DIY lambda compensator compatible with the ZEISS Axioplan microscope. The dimensions are 6x20 mm , matching the official specifications to ensure it fits perfectly into the standard slot. Please note that in…
A muzzle brake compensator with a thread diameter of 14.5 millimeters.
Hier ein Modell für den Skew Compensation in Marlin für alle 3 Achsen in einem Modell zu bestimmen. Here is a model for determining Skew Compensation in Marlin for all three axes within a single model.
Higher carriage bed belt compensation for lm8uu bearing shoe. its higher and slightly beefier then most are. http://www.thingiverse.com/thing:94256 Category: 3D Printer Parts
This universal mount should work for beds around 5 mm thickness.
Remix Raven 1911 Airsoft Compensator Tab adjusted to fit Raven 1911 PLA, 0.25mm, supports
A generic “Sausage Finger Compensator” for a water boiler typed MD10215. Not to confuse with the legendary “Flux Compensator”. But this thing works for real, even in the future. Fixes an error with your fingers. -> don't touch the other…
Ivan's mount is good and solid, but it's not well suited for phones with big camera bumps - for example, my Google Pixel 10 Pro has a 3.4mm camera bump and when clamped into the mount it gets severely slanted. This is a simple sleeve that…
![[BaBo] Plate Holder compensator](https://media.printables.com/media/prints/701001/images/5502971_4c9c8d58-7108-4dfb-8b2e-325515cbea0c_67d0fdb5-6a18-45f6-b93e-e295f399b010/img_4370.jpg)
