Liczymy pasujące modele…
This is the tenth iteration of coasters I've designed, and the best by far. It is designed with several properties I thought were important: It takes condensation off of cups / bottles / etc. as it drips down, keeping them from dripping…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
It is designed to be modifieble in Fusion 360. To modify it you need to upload f3d file to your account an then change parameters in Modify drop down menu. then you change inlet and outlet dimensions to sout your model and pipe that leads…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have lost some of the condensation hole covers in the window frames through age and also the sun. The windows are from Finstral. It might fit other frames as well. With this cap it is possible to cover a hole of max 30mm in length and…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Most high efficiency furnaces capture water vapor and pump it outside via a small (12mm OD) hose). These same furnaces typically run exhaust gasses out through a 51mm (2" ID) exhaust rated PVC pipe. Many installers rig the condensate…
Wydruk około 2,01 €–2,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Captures condensate in air conditioning.
Wydruk około 35,04 €–42,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the model from: https://www.thingiverse.com/thing:5222403 (Thanks to grv107 ) Made a shorter and less sharp version and added one additional support. Printed in PLA
(Bigger) CONDENSATION TRAY for Midea PortaSplit | REMIX This is a remix of the great original tray-model for the Midea-PortaSplit with now rounded edges , 2 different sizes & some modifications for better and WATERTIGHT printing ! And…
This is a part that connects to the lower part of the air conditioner and to it the hose for draining condensate. Because the shape is funnel, there is no need for a rubber seal. The diameter of the hole in the air conditioner is approx.…
This is a holder for the Midea PortaSplit. It can hold serilisation and cleaning tablets for AC condensate. This may help prevent the P1 error which is caused by clogging of the condensate pumps filter. Regularly check on the state of the…
*Update 7.2.18: Redesigned gripping mechanism to screw type from post (plug-in) type. Added Drip catching skirt, no support required. Made this after getting tired of emptying buckets of condensation under my window unit. It now drips…
This is for cleaning out the 3/4" PVC condensation drain line on a home AC unit. It slides onto the end of a standard shop vacuum and fits into the 3/4" PVC drain. This works way better and is safer for the pipes than chemicals or air…
Earlier manuals recommend cleaning the condensate tray with AC cleaning tabs. However the PortaSplit doesn't really come with an ideal location to put these tabs - one might be able to squeeze them in behind the plastic to the left and…
This adapter lets you connect your Ridgid shop vac directly to your AC condensate drain line to suck out clogs in seconds. The Problem: AC condensate drain lines clog frequently with algae and debris, causing water to back up and…
JeNo 3" Support condensateur. Se place sur les entretoises verticales avant. Imprimer “ring” une fois et “bottom” deux fois. Le tout en TPU, sans support.
If making something in the instant pot that produces a lot of condensation, then the small condensation catcher containers are not big enough. One of these two versions has a funnel at the bottom, to drain into a cup or whatever…
This model is for the DeLonghi Magnifica S I suggest PETG for this model.
This is a drain for the Truma condensation water to prevent the formation of icicles. I printed this using TPU with default settings. No supports required. Extra tip: rotate the top solid infill direction so that the lines point in the…
An anti-condensation drinks mat that should not stick to the bottom of the glass when you lift your drink. The radial bars have been added due to some vessels not having totally flat bases. These types of contains (cans/bottles) can rock…
When your gas heater is running, water condenses on the Truma wall chimney and runs down the outside of the caravan or camper. Over time this leaves dirty streaks and water marks below the chimney. This drip edge fits onto the Truma WK 24…
Now that the monsoons have moved in, using a cork coaster just gets wet. This coaster will catch the condensation and allow for easy dumping.
Einfacher zweiteiliger Untersetzer, der das Schwitzwasser in der unteren Hälfte auffängt, hier kann es nach entnahme des Einsatzes einfach entsorgt werden. Simple two-piece coaster that collects the condensation in the lower half, here it…
WARNING, Your print must be waterproof!
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- This specialized barbed connector was designed to firmly…
Vertical condensation separator. DN75 Easy to scale in the slicer (133,3 % = DN100) Category: Replacement Parts
Material: PETG Layer height: 0.2mm Supports: yes Infill: 15%
Redukcja wciskana do rury Fi 32, która umożliwia podłączenie węża np se skroplinami o średnicy ½ Cala (12,5mm wewnątrz) A reduction pressed into the pipe Fi 32, which allows the connection of a hose, e.g. with condensate, with a diameter…
See the story on: https://speleobrad.github.io/compressor/compressor-drainer/ Parametric vortex water separator for PET bottles. Built in OpenSCAD, has configurable number of inlet hoses, their diameter and bunch of other stuff. Prints…
Le raccord de condensat est une pièce d'interface critique située à la base de l'unité intérieure (split) ou de l'unité extérieure de la climatisation. Son rôle est de collecter l'eau issue de la déshumidification de l'air et de…
Designed for a my CAD/CAM station and I got a little carried away…..enjoy! There is more than one coaster holder. The short one is for a single body print. The tall one is for either multibody -or- print and glue. Designed in Solidworks
A plug that fits little giant condensation pumps to use 3/8" fittings. I have 2 dehumidifiers on the floor. This allows you to use 3/8" barb fillings to feed into the pump so the hose doesn't kink. BE WARE THESE ARE TIGHT!!! You will…
Should be able to easily print it vertically with no supports. I did PETG @ 20mm with a .04 nozzle on a mk4 no prob.
A set of feet that lifts the indoor unit by 40 mm, plus a matching tray with 2.9 litres capacity. Together they probably let you run the unit off the indoor water port overnight without emptying anything, depends on the humidity. Like a…
Cuisinart Pressure Cooker Condensation Collector Model EPC-1200PC Found one of these at a yard sale and it was missing the condensation collector. Yeah, you can buy one from Cuisinart I suppose but it didn't look right, so I whipped up…
Horizontal condensation separator DN110 to DN125 Print Settings Supports: Yes Filament: Any ABS Category: Replacement Parts
I use a large water bottle in a humid office. It collects so much condensation and makes my desk very wet. So I made this coaster to catch the water, so that it did not puddle on my desk.
A simple, sturdy straight connector for joining two hoses of the same size. The two ends are barbed spigots that push into the hose ; a central collar acts as a hard stop so both hoses seat to the same depth. Typical uses: Condensate…
This a screw in adapter for the Vivax brand AC. Mine came without the adapter for the outside unit, so here's one I modelled for it. Fits a bit loosely at scale 1, but it's good enough to hold the adapter in place even when the hose it…
This graduated piece makes cleaning the condensation lines a breeze! Simply attach this to the end of your ¼ inch air wand then push the pointed end into your pipe. after its inserted you blow air through the pipe clearing any blockages…
funnel for collecting condensation from the heat pump
Say goodbye to water rings and messy puddles with this smart Condensation Catching Coaster . Designed with a clever two-piece system, the top securely holds your cup or glass while excess condensation drains into a hidden bottom…
🚐 Truma Condensation Drain Pro – Ultra-Rugged & Anti-Stain Tired of those annoying black streaks on your camper’s side? Or even worse, tired of flimsy 3D-printed drains that snap off during the first wash? This Pro version has been…
A quick clip to help manage high pressure 3/8" ID vinyl hose. I got tired of my condensation pump hose kinking and being hard to manage so I made these clips. The are 5/8" in size. They fit this type of hose: https://amzn.to/3OpgRvJ…
Contact Name: Jaime Silva (Model created by a student) School: Estancia High School Best Hub: NMBEST Description of the Process and Design Summary: This challenge was interesting for me to do, and for me being a freshman I am still…
Large enough to fit most cups, glasses, and cans.
A quick clip to help manage condensation pump dehumidifier vinyl hose. It fit 3/8" ID vinyl hose, it's about 19/32 OD. They fit this type of hose: https://amzn.to/3OpgRvJ (Amazon aff) My furnace used 1 ¼" iron pipe for the gas feed as a…
If you have a ½ vinyl hose emptying into your basement slop sink and you want to secure it, slip this hose holder over the edge of you sink. Sink edge should not exceed ⅓ inch and vinyl hose size should have an outside diameter of ½ inch…
After a few years in operation, my Vaillant EcoLevel condensate pump broke down (no more pumping function). The sensor system for the pump control is based on Hall elements. A float with integrated magnets moves up and down on a guide rod…
Made for Ø 22 mm waterpipe. Need some silicone and 2 ea 3mm screw + lock nuts. the aquarium air tube is a Ø 5mm.
I needed to vacuum out my AC unit's condensation line, and was going to try the adapter from @MikeLugo177399, but my line doesn't have a fitting on the end, just a 3/4" PVC pipe. This simple adapter just lets the hose slip over one end…
Replacement Condensation Tray for the Cuckoo CR-632 Rice Cooker Printing Instructions Place the model flat on its back side for printing. Use internal supports inside the container with the following settings: Support Settings Type:…
This is a cup that uses condensation to print a Dr. Strange spell onto where you have placed it (preferably on a napkin) Category: 3D Printing
Modified AC condensate drain to incorporate a 13mm ID LDPE barb fitting
I finished installing the cooker hood in our kitchen, but I forgot to add a condensate trap. When the water started running back down, I had two options: go buy the part or use Fusion 360. I chose the second option, and here’s my…
This model is ugly but functional. Fortunately, I shouldn't have to look at it more often than once every 6 months. This 3d printed frame combines: peristaltic pump xiao ESP microcontroller L298N motor driver 9v rechargeable battery This…
USE AT YOUR OWN RISK The condensate drain trap for my Lennox furnace was cracked and leaking. The replacement part was too expensive, so I made this model to print. It seems to be working for me, but I have NO GUARANTEE that it will work…
As you can see in the pictures, my AC is making quite a bit of a mess on my wall by spewing water all over it, the technician said it couldn't be fixed, so I built this contraption to capture the water that comes in, even sometimes when…
This is a replacement screw cap for the Baxi Gas Boiler. The condensate trap has a screw that you can unscrew if you want to flush and clean it. The original one had formed a crack and was leaking condensate water. After measuring the…
A flood in our storage room/Heater-AC closet made a mess and me realize that I needed to make a monitor. I already have a Home Assistant Server in service for my 3D printer so I am using it along with the ESPHome integration to monitor…
Inner dimensions: 92mm x 222mm
Scale 1500% for best use in your preferred slicer!
Keep your condensation-catching coasters organized and within reach with this simple Coaster Holder . Designed to neatly store your stack of coasters, it prevents clutter while making it easy to grab a coaster whenever you need one. Its…
AC Condensate Drain Fitting (Straight & 90° Elbow) A snap-in drain outlet for the condensate hole in an air-conditioner or outdoor-unit tray. Push it into the hole and the reinforced clips lock behind the sheet metal (about 1.3,1.4,1.5 mm…
Our upstairs AC had nowhere to drain its condensate — no central drain line, and we rent, so no permanent plumbing. Meanwhile a neighbor made a hobby of walking along the building and collecting every AC drip on her head. Out of a dozen…
AC Condensate Drain Fitting (Straight & 90° Elbow) A snap-in drain outlet for the condensate hole in an air-conditioner or outdoor-unit tray. Push it into the hole and the reinforced clips lock behind the sheet metal (about 1.3,1.4,1.5 mm…
Bec coudé avec bille pour évacuer la condensation vers l'extérieur sur fenêtre anciennes coulissantes aluminium
Replacement condensate cup for Aroma 4-cup rice cooker. Mine is a slightly older version, so I couldn't find a replacement for this one specific part. PETG recommended for this part, I tried a PLA version but it warped with the heat of…
This is a case i designed to be used with old latops turning them into an oversized game deck/cyberdeck i will add the sketch i used for the controller soon this will require some tinkering depending on what parts you have available As…
This model is for the DeLonghi Magnifica S I suggest PETG for this model.
Recommended settings: Layer height: 0.20 mm Walls: 3 Infill: 15–20% Material: PLA / PETG PETG recommended for better moisture resistance. Assembly: Print the base. Insert wood piece into center slot.
Bec coudé avec bille pour évacuer la condensation vers l'extérieur sur fenêtre anciennes coulissantes aluminium
Le raccord de condensat est une pièce d'interface critique située à la base de l'unité intérieure (split) ou de l'unité extérieure de la climatisation. Son rôle est de collecter l'eau issue de la déshumidification de l'air et de…
🚐 Truma Condensation Drain Pro – Ultra-Rugged & Anti-Stain Tired of those annoying black streaks on your camper’s side? Or even worse, tired of flimsy 3D-printed drains that snap off during the first wash? This Pro version has been…
Recommended settings: Layer height: 0.20 mm Walls: 3 Infill: 15–20% Material: PLA / PETG PETG recommended for better moisture resistance. Assembly: Print the base. Insert wood piece into center slot.
