Liczymy pasujące modele…
Two versions of CTEK charger plug holder, both versions for motorcycle tube frame. Print it from PETG, ABS or PC. Apply double sided tape between the holder and frame and fix it with 2 ZIP ties.
Description: A box for the CTEK battery charger. I was inspired by Whity's " Rugged box " but I don't use Fusion 360 so I redesigned it. Printing: Layer height: 0.2 Supports: No Material: PETG Assembly: 6 x M3x40 screws are required for…
The CTEK CS One charger has a recess on the rear for accessories, so as I wanted to hang mine on the wall next to the motorcycle, I designed this clip, which allows it to be quickly removed if you want to use it elsewhere. I've printed it…
dies ist ein Wandhalter für ein MXS 7.0 Ladegerät von CTEK. Wenn um das Ladegerät ein Gummischutz verbaut ist muss das Model größer skaliert werden.
This is a bracket to hold your CTEK or NOCO branded quick connector. This bracket makes it easy and convenient to connect and disconnect your battery tender. I also print these from my Etsy store and also have some S2000 specific brackets…
Added Ctek mount with drain holes. Grabbed a half price Cteck at Black Friday sale. Modern cars with extensive computers have high drawdown if not used for few weeks. In my case this was causing issues with entertainment system due to low…
Fit the left and right part over the CS connector. The cilindric chape of the parts should be at the CTEK connector opening. Assemble the parts 2 mm from the connector front to allow for the clip of the male connector to engage. The 2…
Wall mount for maintainer with Porsche logo on background.
I designed this as a permanent mount for the CTEK eye/ring terminal charge adapter for my MT-07. Designed one for each side, depending on preference. Printed in ASA with a 0.4 nozzle 280/90 0.2 Layer height
This is a remix of Manny Virdee's (mvirdee on Thingiverse, https://www.thingiverse.com/thing:4712348 CTEK Charger Holder (www.thingiverse.com/thing:4712348/files) that I embossed with the NSX Logo. Printed with PTEG. Please share your…
Holder for CTEK chargers from 3.8A to 5.0A like CT5, MXS3.8, MXS5.0 with the matching Bumper. You'll also need: 2x Rubber bands, O-Rings or TPU printed rings with around 60mm diameter For use with the seat console holder: 4x M4x6x6mm heat…
I have a 12V car battery charger that I need to use frequently and it's always laying on the floor, generally at risk of being driven over, etc. I looked for a few wall mounts but wasn't happy with any, so I decided to overengineer my…
This housing is designed to contain: 1x - Junctek 600A Bluetooth Battery Shunt Monitor with RS-485 Display, Temperature Sensor, and Relay Control (KH160F-0-120V-0-600A) 2x - Anderson Powerpole 175A Connectors (Supply and Load Sides of…
Stand/Wall Mount for Ctek Chargers If you like the project and would like to like it, I'd be very grateful ;-)
Passgenaue Wandhalterung für das CTEK MXS 5.0 Ladegerät. Alle Anzeigen und der Bedienknopf bleiben frei. Links ist ein Haken als Schnappverschluss angebracht und rechts besteht an den beiden Lächern die Möglichkeit ein Vorhängeschloss für…
Simple holder I made for Ctek Zafir 100. I printed it in PETG with 3 walls and 12% gyroid infill. No support needed, print with bottom down.
I use this for mounting my CTEK MUS 4.3 Charger bracket to Slatwall along with M5 bolts. (it just threads straight into the part I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not…
I use this for mounting my CTEK MUS 4.3 Charger bracket to Slatwall along with M5 bolts. (it just threads straight into the part I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not…
Simple holder I made for Ctek Zafir 100. I printed it in PETG with 3 walls and 12% gyroid infill. No support needed, print with bottom down.
I got a Juntek batter monitor and didn't want to put any more holes in the RV so I built a desktop mount for it. I used PLA, but pretty much anything should do.
Printed with Addnorth TPU Pro Matte 95A and Esun PVA as interface. First 12mm 100% infill and the rest i used 15% gyroid
A socket mount for CTEK charger to be mounted with 4x10 panel screws (or similar) directly to any plastic panel. Socket is press fit in the mount. Tolerances of your combination of printer + material + settings might be a bit different,…
I liked the design of the MXS 10/MXS 7 holder, but my MXS 5.0 is smaller in size. I also wanted to have more substantial brackets for winding the cables and a place to clip the cable clamps. Because the MXS 5.0 is smaller, I was able to…
Redesign from great concept of the CTEK Charge Port Dust Cover from NarfBLAST
CTEK (excellent charger, no affiliation) has plastic grip parts in the connectors which are attached to the car battery. They are made out of... I guess ABS plastic The small latches are quite small and I broke one. The plastic grip thus…
This is a bracket for the CTEK connector. It fits KTM 1290 SA or any pipe that have a diameter of 24,5mm Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Filament: Velleman PLA Orange Post-Printing…
CTEK XS 0.8 CHarger Wall Mount Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Organization
Wall mount for battery charger & cable tie Category: 3D Printer Accessories
Holder for hanging your charger on the wall. It should work for other chargers of similar sizes.
A wall mount for your Ctek MXS 10 battery charger that will help you organize the cables for easy use. You can easily mount it on the wall using screws and plugs through the two 4mm holes. Can be mounted perfectly on plaster, wood or…
