P
Printables
Kingston DataTraveler keycap
Recently i lost my keycap for my Kingstom DataTraveler and i had to remake it.
Wyniki wyszukiwania: data
Liczymy pasujące modele…
P
Printables
WaveShare 2.7 NFC Data Range Case
Holds a WaveShare 2.7" NFC card that is used as a Data Range Card. Data is transferred from Strelok Pro Ballistic Calculator to the WaveShare card via NFC. Displays the distance, elevation and windage. Hardware Required: (4) 3mm x 6mm…
P
Printables
Yarbo Datacenter - Roof peak soffit /Gable End mount
OEM mount is a long and gangly pole , too wobbly for me! Too many posts of folks adding guy wires to keep the wobble down. Any wobble at all will offset your yarbo core by the same amount; its supposed to be static! This mount is intended…
P
Printables
IKEA DATASKÅP
IKEA DATASKÅP IKEA kitchen cabinet storage server This model contains all parts of my main home storage server, build inside an IKEA MAXIMERA kitchen cabinet. The cabinet provides easy access for maintenance and upgrades. My next upgrade…
P
Printables
Raw data from tensile testing of different infill paterns and densities.
These are raw data in .csv format from tensile testing of various infill patterns and densities, as specified in ISO 527-2. All project and G-code files are uploaded here: The research article was published here: Note: The file structure…
P
Printables
DataBlock - Design SSD M.2 NVMe 2230 case
This is an original case looking like a folder logo we could find on different operating systems. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive…
P
Printables
Stolní kalendář - výměnné měsíce a data
Jedná se o základnu , karty čísel , měsíců a tenkou dlouhou vložku tvaru L proti vypadávání (Není nutná ale je vhodná). Vhodný je dvoubarevný vrstvový tisk pro lepší viditelnost písmen. Pod čísla je vhodné použít podpěry.
P
Printables
DataFlop - Design SSD M.2 NVMe 2230 case
This is an original case looking like an old floppy disk. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive ventilation, and has a hole shaped like…
P
Printables
Canon Data Memory Back 90 Plug Lid
A lid for the cable connection on the Canon Data Memory Back 90. Printed in TPU for good fit.
P
Printables
Kay Vess's Data Spike
Kay Vess's Data Spike from the Star Wars Outlaws game. Modeled it based on the image of it from the Outlaws inventory. Prints at roughly 8 inches long, decided on that length because that looks like roughly the size when compared to Kay's…
P
Printables
Data Monitoring Mount for Arduino and I2C Display
Basic mount for i2c Liquid Crystal display paired with Arduino Uno form factor board (in this case R4 WiFi for fetching http data). The code for both the temperature monitoring HTTP server (basic vcgencmd measure_temp usage) and the…
P
Printables
Mountain Bike Data Logger - The Box
Background: This is part of a much bigger system design which is detailed here: Mountain Bike Data Logger Detail: The rear shock stroke sensor is specific to my shock, Cane Creek Coil IL, but likely easy to modify design for others. The…
P
Printables
Commadore 64 Datasette
MainBase, MainUpper and ButtonCarrier printed in baige fillament (or white) Buttons, Spindle x2, ResetButton in black fillament Door in transucent fillament OR DoorFront glued to 1mm thick clear acrylic sheet Modelled in FreeCAD
P
Printables
Angled Keystone Panel for a standard data cabinet - 14 ports
A quick angled keystone panel I threw together to replace the ancient Hills Home Hub patch panel that was in my home. Uses two M4 screws to screw into the peg hold backing mount.
P
Printables
Foretrex 301 data port cover
My cover has broken after many years. I designed this to replace the old cover and it works like a charm. Unscrew the 4 screws in the cover (T5) and remove the front. Unscrew the two Phillips 000 screws and remove the printboard. Remove…
P
Printables
DATA CABLE PROTECTOR / USB CABLE PROTECTOR / CHARGING CABLE PROTECTOR / APPLE CABLE PROTECTOR / WIRE
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) DATA CABLE PROTECTOR / USB…
P
Printables
Underwater Cities: Data Era Board Game Expansion Disk Resources
I didn't like the card board chits for the Data Era expansion for Underwater Cities, so I made these.
P
Printables
Apple II+ Power light lens for Datanetics 2nd version keyboard MM5740 Assy 01-0425
Printed face down. No supports needed.
P
Printables
Ultimate Portable Rotatable Data Cable Organizer Storage Box without Hinges
change from hinges to snap mechanismus
P
Printables
Pegboard Data Storage
Hi, Simple Storage solutions for SSD, M.2, USB and SD-Card. see pictures. and yes only one from the back, it's pretty much the same on all of them. Fits on 15x15mm pegboard every printer is different, and you know better what yours is…
P
Printables
TicWatch Pro 3 - developer USB data dock using pogo pins
Connect the TicWatch Pro 3 to USB using this dock and pogo pins specified in the attached image.
P
Printables
Wall stand for smartphone with usb charge and data - Supporto a parete per smartphone
Un semplice supporto a parete per smartphone con mega cover con porta usb per la ricarica rapida e il trasferimento di dati A simple smartphone wall mount with mega cover with usb port for fast charging and data transfer Custom Section…
P
Printables
25 DAYS OF 3D PRINTING CHRISTMAS DATABASE
DAY 1 https://www.printables.com/model/665803-25-days-of-3d-printing-christmas-advent-calendar-n DAY 2 https://www.printables.com/model/667148-25-days-of-3d-printing-christmas-advent-calendar-n Day 3…
P
Printables
HSW Data Holder (SD Card/Micro SD/USB)
This is a remix of Data Holder Mk2 for the honeycomb storage wall . My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15% infill * no supports needed Happy printing!
P
Printables
DataToaster 3000 - the Future of Kitchen Data Storage
The DataToaster 3000 is a fully functional NAS with two 3.5 inch hard disk docking stations built inside of a toaster. The hard disks can be easily swapped out (while it's powered off) without taking anything apart. It uses a Zimaboard…
P
Printables
Datamax Label Alignment Adjuster
I created this to physically move the labels 2.6mm over to match the left edge of the label on the bartender software at work. This now allows us to center the labels in the bartender software instead of having to adjust them to try to…
P
Printables
Leica Data Collector Clamp Spacer
Spacers get lost over time but are not sold individually so I created one that can be used, lost, then reprinted for years to come.
P
Printables
Cover For 48pin Aries ZIF Socket Xeltek Beeprog Dataman and Others
Cover For Single Lever 48pin Aries ZIF Socket Xeltek Beeprog Dataman and Others Due to the Various Sizes on Aries Sockets Scaling may be Needed not a lot .5% + or - I average 20 Sockets took the middle measurments and went with that.
P
Printables
High power nozzle for DATAVAC MetroVac
Smaller tip nozzle for the Datavac/Metrovac ED500 Prints easy with no supports
P
Printables
Data Frog S80/Dinofire B01 Holder
A larger version of the stand for Data Frog S80/Dinofire B01.
P
Printables
Data Gauge/Dial and Stand
A total of 5 Dial Graphics are provided in this release and now on Printable as part of Open Gauges – sized to fit into the 3D printed cases. The 5 Dial Graphics are – Temperature (-10 to 40 oC), Wind Speed (0-60 mph), Wind Dir (0 – 360),…
P
Printables
Raspberry Pi Zero and Pi Sugar Battery Case - Open Data Collection Project
This Raspberry Pi Zero and Pi Sugar Battery case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection This…
P
Printables
GPS Module Case - Open Data Collection Project
This GPS module case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection This module is intended to act as…
P
Printables
Commodore 64 + Datassette stand
Commodore 64 + Datassette stand This is a remix of this model: https://www.thingiverse.com/thing:3921140 The C64&Datassette version is compatible with both the C64 and the Datassette.
P
Printables
Bigscreen Beyond Audio Strap - Official CAD Data
The official Bigscreen Beyond Audio Strap CAD model data! Useful for designing modifications or replacement parts, or for 3D printing accurate models. (Please remember to refer to your Bigscreen Beyond warranty as certain modifications…
P
Printables
Raspberry Pi Camera Case and Mount V1 - Open Data Collection Project
This Raspberry Pi Camera module case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection This module is…
P
Printables
Raspberry Pi Camera Case and Mount V2 - Open Data Collection Project
This Raspberry Pi Camera module case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection This module is…
P
Printables
Raspberry Pi Camera 1 to 2 View Adapter V1 - Open Data Collection Project
This Raspberry Pi Camera module case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection This model is a…
P
Printables
Raspberry Pi Camera 1 to 2 View Adapter V2 - Open Data Collection Project
This Raspberry Pi Camera module case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection This model is a…
P
Printables
RPi Camera and GPS Data Collection Device - Open Data Collection Project
This model is a combination of the Camera Module, GPS Module, and RPI and PiSugar Model for the Open Data Collection Project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection…
P
Printables
Adata AP10000QCD External Battery for Camera! (a LOT of battery)
A external powerbank holder for any cage/camera! I created this because my Sony a6300 really bad battery life. With this i have a LOT more recording time, better temps and better top grip! Needed parts: Adata AP10000QCD power bank, is…
P
Printables
Casio 2515 (Databank-36) Strap | TPU
CASIO Databank watch strap. (https://www.casio.com/us/watches/casio/product.DB-36-1AV/) There are total four files: CASIO_2515_DB36_CLIP_STRAP: Short strap where clip goes. CASIO_2515_DB36_STRAP_110MM: Long strap with 110 mm length…
P
Printables
Transit Data Reader - Solo a Star Wars Story
This is a recreation of a prop found in the Solo a Star Wars Story visual directory book. It's been drawn up in two halfs so that electronics can be fitted. There are two front panel options, one WITH a non functioning keypad, one without…
P
Printables
ArduDAQ - enclosure for the arduino data acquisition shield
Basic enclosure for the ArduDAQ - an arduino data acquisition shield. More about it at: https://github.com/icrnjavic/ArduDAQ
P
Printables
USB / DATA Cable Hanger
Printed this standing on its end with supports so the filament layers run the most supportive way. Can be printed on its back without support but prongs tend to snap because the layers lie the incorrect way. Its modular too, so you can…
P
Printables
Kingston DataTraveler keycap
Recently i lost my keycap for my Kingstom DataTraveler and i had to remake it.
P
Printables
WaveShare 2.7 NFC Data Range Case
Holds a WaveShare 2.7" NFC card that is used as a Data Range Card. Data is transferred from Strelok Pro Ballistic Calculator to the WaveShare card via NFC. Displays the distance, elevation and windage. Hardware Required: (4) 3mm x 6mm…
P
Printables
EZ Print Gaslands Dashboard with Fillable Car Data Sheet
An EZ printed dashboard for the Gaslands miniatures war game. Includes a fillable PDF file to hold vehicle statistics. At 190x155mm, this is slightly bigger than the plenty of fine Gaslands dashboards out there, but none of them were…
P
Printables
Data I/O 29B IC Programmer Prom Shield
This part seem to get lost since i had my Data I/O 29B programmer Open for Firmware Update I figured I would Model. I Have tested this in 3 Different Data I/O 29B's and it fit all good. I left screw hole a little small as i seen 2…
P
Printables
RS232 Solar inverter datalogger/Wi-Fi Plug Pro wall mount
To mount this, you'll need M4 threaded inserts pressed into the 2 holes which hold the datalogger into place. The hole diameter for the wall mount screws is ∅6mm.
P
Printables
DataVac Desktop Stand
Designed for the MetroVac DataVac Series ESD Safe Canister Vacuum DV-3-ESD1. It should also fit the DataVac Pro Series 2 & 3, and other canister vacuums with a 510mm circumference. Print In Place hinge design. You'll need 2 brackets for…
P
Printables
ADATA SC750 ssd mount for Mac mini M4
The ADATA SC750 SSD is an easy way to add space to your Mac mini M4. And I made a bracket to hold the SC750 nicely.
P
Printables
ADATA SD810 External SSD Case
Do you need a case for your external SSD? probably not since its made of aluminum, but why not right? Print your ADATA SD810 a case to protect it even further. File prints a snug fit to the SSD and the friction itself would hold the SSD…
P
Printables
Adata ED600 wall mount
I made this wall mount for my external SSD for the Adata ED600 enclosure, to mount behind my Raspberry Pi4 so it is hidden.
P
Printables
Damaged-Weathered Star Wars Data Pad
Damaged-Weathered Star Wars Data Pad Not sure what this is good for. But I put in some time on this experiment, so I decided to publish it. Originally, I wanted to work out as a switch plate cover. It did not make the grade. The layout is…
P
Printables
datapirat mole patch
mole patch with data pirate include fusion 360 file Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 5% Filament: dasfilament pla glow in the dark Category: Accessories
P
Printables
Hilfsmittel / Daten zum erstellen von Einsätzen - Modulares Lagersystem - Hobby & Werkstatt - Kleinteilelagerung // Tools / data for creating inserts - Modular storage system - Hobby & workshop - Small parts storage
passend zu // suitable for https://www.printables.com/model/924224-modulares-lagersystem-hobby-werkstatt-kleinteilela https://www.printables.com/model/1012517-version-2-modulares-lagersystem-hobby-werkstatt-kl…
P
Printables
Star Wars Data Terminal
Print all 3 pieces, glue the cover onto the base, placing the pegs in the holes. Attach the back brace with tape to hold the paper in. Add a piece of plexiglass in front of the paper is desired. Made for the airsoft roleplaying event…
P
Printables
Desk Holder - For Aceele Data Hub 4 Ports
Screw your Aceele Data Hub 4 Ports anywhere on a wooden surface.
P
Printables
Saturn V Rocket - Datasheet - Blueprint - Poster
Hello everyone, I have vectorised a technical drawing of the Saturn V Rocket and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the settings in the…
P
Printables
Hasselblad Data Camera used on Apollo Mission
Hello everyone, I have vectorised a technical drawing of the Hasselblad Data Camera used on Apollo Mission and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes!…
P
Printables
Star Wars Datapad tablet case
Print one of each piece, and glue the roof piece onto the base. slide in the tablet and use tape to secure the holder.
P
Printables
Desktop mount for Testo 175H1 Temperature & Humidity Datalogger
A relatively simple design for a desktop mount for the Testo 175H1 datalogger. I didn’t want to mount it on a wall, so this version allows you to easily transport the datalogger while providing convenient access to the USB port for data…
P
Printables
DATAMAX 25mm core holder/tool
Holder/tool to use Zebra Thermal labels with a 25mm core in a Datamax / Mito DMX-I-4208 printer. The original holder is too large to fit the Zebra 25mm labels. Print two times, one left and one right. Category: Other
P
Printables
Extrudr Spool Filament Clip v2 + Weight Database
An inline filament clip for Extrudr spools. Well … several actually, as Extrudr uses a bunch of different spools. The clip weighs 1.06g and the filament can be clipped-in/removed without removing the clip. The clip can remain inside the…
P
Printables
GPS data logger with SD card
I wanted to have a GPS data logger that I can record data for my hiking trail then import it to Google map with KLM file format. Required components Micro SD Card Breakout Board…
P
Printables
dbt logo (Data Build Tool)
Show off your data transformation prowess with this clean, minimalist dbt logo stand! Perfect for data engineers, analysts, and anyone who appreciates the power of data build tool in their workflows. The design maintains the recognizable…
P
Printables
Yarbo Datacenter - Roof peak soffit /Gable End mount
OEM mount is a long and gangly pole , too wobbly for me! Too many posts of folks adding guy wires to keep the wobble down. Any wobble at all will offset your yarbo core by the same amount; its supposed to be static! This mount is intended…
P
Printables
Severance Macrodata Refinement Terminal
https://learn.adafruit.com/portable-macrodata-refinement-terminal
P
Printables
Datafrog SF2000 Skadis Mount
Recently printed a Skadis board to hold my handhelds rather than them dotted around the place. Noticed quite a few didnt have any designed (or had poor reviews) so I've designed my own. Fits well enough for me so hopefully helps others…
P
Printables
Miniature Outlet Covers (Light, Power & Data)
Realism to any miniature interior with little details! This is a print-in-place, 1:12 scale set of four miniature wall plates: a toggle light switch, a rocker light switch, a data plug, and a power outlet. Designed for dollhouses and…
P
Printables
DATAGNSS Nano RTK Receiver Housing (upgraded ver)
A custom-designed housing for the DATAGNSS Nano RTK receiver. The model consists of two parts, ensuring an easy fit for the PCB while providing secure protection. It features precise cutouts for the antenna, USB-C port, and UART…
P
Printables
Star Wars Datacard SD Holder
SD card holder modeled after the Datacard which carried the Death Star Plans in Rogue One and A New Hope . The tray which holds the SD cards is held in place with enough resistance that it won't come out accidentially. It is 88mm long,…
P
Printables
DT3 USB Cable Tester PCB Support (Data Cable Detection Board)
Support for DT3 USB Cable Tester (and lightning) Data Cable Detection board on AliExpress: https://fr.aliexpress.com/item/1005006910915098.html Edit 19/03/2025: Add a full cutout version.
P
Printables
Detailed earth model from GIS data
I created this model of earth using GIS (Geographic Information System) data. To model it I used the tools QGIS and Blender. The height map used has a resolution of 3600x1800 points. I used such a high resolution to allow the model to be…
P
Printables
Arduino Nano reptile data logger for both temperature and UV
Reptile temperature and UV data logger I wanted to be able to monitor the temperatures and UV for our skink more closely. This was my first time using Arduino so it was a bit of a learning curve for me. So this is how I am doing it. This…
P
Printables
Detailed map of earth from GIS data
I created this model of earth using GIS (Geographic Information System) data. To model it I used the tools QGIS and MeshLab. In case you are interested in the data source, it is available at: Danielson, J.J., and Gesch, D.B., 2011, Global…
P
Printables
Multiscale Data Racks for Sci-Fi and Cyberpunk Wargaming 6mm 10mm 15mm
Computer server racks for wargame terrain ranging from 6mm to 15mm. optimized for resin but somewhat passable with FDM @.05mm layer height. Two types of racks are provided: 1 is just all server and storage, one rack also has a console for…
P
Printables
Arduino Reptile data logger v2
After building the first data logger I updated it making some improvements. It now collects UV, temperature, and humidity data and then a second data temperature sensor provides data from a separate spot to the main housing. It uses an…
P
Printables
Okidata Gear
This is a replacement ribbon gear designed for a friends Okidata Microline 320 dot matrix printer. The module I used is 0.4, and, there are 14 teeth. I measured it using an ocular micrometer and used the image as a canvas guide in Fusion…
P
Printables
Lumon Macrodata Refinement Terminal - Raspberry Pi - based on Severance
Full project description and build log is on my site: https://erik.build/kb/Making/Lumon+MDR+Terminal Printed in Overture PLA (White, Black, Matte Navy Blue). I printed the shell in 0.15mm layer height on it's back, with a brim and…
P
Printables
Steven - Remote weather data gathering station
This is a remote part of my weather station, meant for measuring temperature/humidity/pressure and sending it via ESP-NOW to the main unit - ESP32S3/Lilygo T5 4.7 E-paper display . For anybody interested source code can be found here:…
P
Printables
LDR Laser KY 008 Data Transmitter Arduino
For Arduino Laser and LDR Data Transmission. It been used 0.8mm Fishing Line Clear Nylon. look at last images Print Settings Material: PLA Rafts: No Supports: No Nozzle: 0.4 Resolution: 0.08 because of fine Thread
P
Printables
USB SD MicroSD Data Cloud Storage
This design is a remix of https://www.thingiverse.com/thing:3709457 , where I closed the bottom openings of the microSD slots, so cards won't fall through if the cloud is raised from the table. USB slots might benefit from making them a…
P
Printables
Andor Dedra Meero ISB datapad for 1:6 and 1:12 scale figures
Andor Dedra Meero ISB datapad for 1:6 and 1:12 scale figures. This model is my recreation of the ISB datapad used by Dedra Meero in Andor. This is a simple 1 piece model and is roughly scaled to 1:6 for 12 inch figures such as Hot Toys…
P
Printables
Generic Aluminium EDC Capsule Data/Yubikey Vault
Description After looking for a way to keep some flash drives and other USB keys as safe as possible, I found some generic aluminum EDC capsules online that fit the bill; however, the loose drives were rattling too much when simply…
P
Printables
Data Hoard sign
100x160mm sign, with art of floppy disks and SD card. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the Shadowbox…
