Liczymy pasujące modele…
Needed to mount drives in my new 10'' rack server case…. so far it holds. Suitable for 3.5'' SATA drives with joined power and data extension cable (hot glued into the hole).
I did not like the orignal hdd cage of this case. Also it offered only place for three 3.5" hard drives and it was hard to access the drives. As I am using this case as a server, I wanted quick access and place for 4x 3.5" harddrives. In…
Gridfinity storage container for 6 2.5inch harddrives or SSD drives. Made with https://gridfinity.perplexinglabs.com/. Printed with PLA, 0.4mm nozzle. No support needed.
This is adapter tray to fit 2.5" SSDs into a 3.5" HDD mount. There are four versions of this model; two that fit 3x 7mm high SSD and two that will fit 2x 8mm+ SSDs. For each mount there's a full sized 3.5" tray and a "stubby" tray that's…
Basic 3.5 inch harddrive holder.
Fit 2x2,5" SSDs into Cooler Master Elite 360 tooless 3,5" bay
This is one of my first builds in Onshape. Was meant for a Case replacement for an Outdated, but still functional HDD Adapter. Can be modified in Onshape, maybe in some other 3D Modeling Software like Fusion 360 as well. Printed on a…
Simple 10 inch rackmount for 2 3.5Inch HDDs.
So i've been using the SpeedDrive Direct Extruder mount (https://www.thingiverse.com/thing:3816051) on my Ender, but after switching to a dual gear extruder i've noticed that its a bit thicker then the stock and doesnt allign with the…
A harddrive pegboard mount for WD MyPassport Ultra. Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and about 5.5mm thickness. Printed in PETG at 0.2mm layer height. Requires supports for the upper row of pegs.
The WD Elements Hard drives i use, get pretty hot after a few hours, so i constructed a passive cooling stand, which uses the chimney effect for a effective passive cooling of my hard drives. The heat of the drive cant transfer to the…
Direct Drive Adapter for Bondtech BMG extruder and the Hero Me Gen5 on an Ender 3 series, Ender 5 series, or CR-10/S. This should work with all Hero Me Gen5 compatible hot-ends as they are all positioned in the same place. Print…
Based on great design https://www.thingiverse.com/thing:3816051 Very light and simple design that doesn't need support Compared to original, solid print, difference is 11 grams (32 vs 21) which is an obvious plus for direct drive extruder…
Four different models for mounting 2.5" SSD in a 3.5" HDD rack. Two versions, one holds 12x7mm SSD's with about 1mm of space between them; the other holds 10x7mm SSDs with about 2mm of space between them for better airflow. Both have a…
The artefacts is just my printer being weird, but it still works. Print upright
documentation https://www.thingiverse.com/thing:3816051
Modified Original , to fit 5015 fan and lowered to fit with SpeedDrive (Direct Drive mod). Also, added some holes and raised the part near heatblock cables to prevent ocasional deformation from execessive heat (observed in some original…
A case for a USB drive, made to be as small as possible. I got the PCB from an old USB, the driver is a ChipsBank CBM2199. PCB needs its side cutouts enlarged a little with a file to fit. Then it slots into the case and it closes up.…
SpeedDrive Remix - Ender 3 direct drive mount for BMG & Pancake Stepper Hero Me Gen 5 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Neema 3D PLA Black Category: 3D…
boite de rangement disque 3.5 pour stoker facilement vos disques dur box harddrive 3.5
I made this Thing to combine a few Things for my direct drive upgrade. I used the SpeedDrive v1 by "sashalex007". https://www.thingiverse.com/thing:3816051 To be more precisely the file named speedDrive_mount_cableClip.stl The drive mount…
This is an awesome Tower for Raspberry Pi. - The design is adapted for original Metal case for Raspberry Pi 3-4 - You can put one or two harddrives in the bottom of the tower. - Unlimited height (I have 5) - All in one place
Second remix to additionally fit 40x20mm radiator cooling fan. Check parent remix for additional info. Fans mouting: 4x 20mm+ m3 screws - for radiator fan 2x spare parts screws, the same as these keeping X and Y tensioners.
I use external USB harddrives to back up my data. My main computer has a midi-tower case, which means that the USB drives were always dangling around somewhere behind or besides or on the computer. To provide a fixed (and secure) place, I…
direct extruder motor mount for the ender 3 printer fitted with an e3d v6 hotend
Clipp on harddrive cage for Malolo's raspberry pi case. The cage clipps into the bottom of the bottom_mesh_sm part from the original case and fits normal 2,5" drives. Here's a link to the original case:…
To stack my WD elements harddrive i designed this simple loop. Printed with TPU with different heights. Every height between 1-2cm works fine. Category: 3D Printing
Another remix of the popular speeddrive compatible with the HM5 and BMG with a pancake stepper. I added a mount for a dragchain and made a part for the X motor plate to recieve the other end (Ender 3 Pro, probably Ender 3 and v2 aswell).…
This cover can be used to label your harddrives and protects the connector during storage. They are initially made for 9.5mm thin 2.5 SSDs but fit perfectly on also on 3.5 inch HDDs. You can print them simple in different colors to…
I ordered a left handed / mirror version of the BMG Extruder by mistake. Had to make a ~8.34 mm offset to the right of the top part so that the extruder would be aligned with the hot end. Original description : Direct Drive Adapter for…
Made a holder for my external hard drive, inside is 37,4 mm x 145 mm Category: Computer
--Ultimaker Cura Settings-- - Layer Height - 0,12 mm - Print Speed - 20 mm/s - Wall Line Count - 3 - No Support - Build Plate Adhesion Type - Skirt or Brim
https://www.thingiverse.com/thing:5205637
i remixed the speedDrive v1 from thingiverse so it could be used with a pancake motor and no end stop.
Modified with FreeCad, Realthunder link branch . Print and instructions https://github.com/sashalex007/speedDrive
Dust Cover for HardDrive Docking Station by RebelTaz I bought this SATA docking station on Amazon (model # RX303-PU3-35B by Rosewill). For less than $15, i cannot complain. It works great for both 2.5 and 3.5' drives. The only problem I…
Added cable chain mount to the SpeedDrive remix that supports the Hero Me Gen 5 cooling system with the stock stepper and extruder. Fun fact: if you use the red aluminum dual gear extruder, you need the STOCK SpeedDrive to be able to use…
A simple holder to hang an 2,5'' hard drive (mine is an old WD Passport) to a Skadis pegboard ( https://www.ikea.com/be/en/p/skadis-pegboard-black-50534378/ ).
Print with a litttle support on the curved front part. The disks slide in. I use a lot of raw disks and a SATA USB plug for archive and storage.
Remix of the SpeedDrive to use a Bontech/Bigtreetech Dual Gear Extruder with a Pancake (42x20mm) Nema 17 Stepper It clears the frame without the endstop extender I also included Boltholes on the side to mount a ADXL 345 I had trouble…
This USB drive holder is able to fit inside many different credit card slots in wallets. The card itself is significantly thicker than a standard credit card. However, in my experience, it is able to fit into most wallets, especially…
So, back when I used the Bullseye, there was a "SpeedDriveLite" version of the mount that used 0 supports and worked just as well. I was unable to find that model, else I would attribute this as a remix of that. Anyway, I tired to…
this sits nicely on top of the LaCie Rugged harddrive
Just a simple insert to put the Craftsman SpeedDrive Screwdriver Printing settings Same as the original HSW
in our village it is a tradition in march to decorate vehicles beautiful
All file could also be found at https://github.com/tsbogend/3dprints/tree/master/wyse-zx0
It's a spacer i used when mounting the speeddrive direct drive conversion to my ender 3 with a e3d v6 hotend. I've found that most E3D V6 mounts for the ender 3 offset the hotend 10mm forwards in comparison to the stock hotend so i just…
Fitts my seagate HDD 5T Model: SRD0NF1
Slightly modified speeddrive to allow for better use of a pancake motor, and no need for adjusted endstop. Category: 3D Printer Extruders
A case for a USB drive, made to be as small as possible. I got the PCB from an old USB, the driver is a ChipsBank CBM2199. PCB needs its side cutouts enlarged a little with a file to fit. Then it slots into the case and it closes up.…
A simple holder to hang an 2,5'' hard drive (mine is an old WD Passport) to a Skadis pegboard ( https://www.ikea.com/be/en/p/skadis-pegboard-black-50534378/ ).
