Liczymy pasujące modele…
I needed a model of the DE10 Nano for a future project. No one had posted one yet so here you go. This is not meant to be printed but used for creating cases and the like. Category: Gadgets
See the youtube video for details. The extruder requires three or six MF85ZZ flanged bearings and three or six countersunk M3 screws. The flanges on the bearings need to be ground to 9.1mm diameter edges. Alternatively, pick your own…
A simple protective case for the DE10-Lite. Designed to be simple but effective, the standoffs fit into the holes and the board clips into place. Designed for 0.2mm layer height and 0.4mm nozzle. Can be printed with no infill with 3+…
work in process project added double bearing version that uses 6 MF85ZZ bearings drill shaft jig to hold shaft from turning in lathe.
All the modifications I made to GutBomb's original models were done in TinkerCAD. Printed on modified original Ender 3 (Direct drive, Sprite Extruder, CR Touch) eSun Bone White PLA+ filament used
This is a case for a minimalistic MiSTer setup with no I/O board and no USB hub board. It is designed for vertical RAM modules and the popular Noctua NF-A4x10 5V fan (any 40x40 5V fan will do the job). When installing the board, make sure…
Compatible with Fujifilm DE100 and DE100-XD Photo Printers Can be printed on Bambu Labs printers (barely) with build volume of 256x256x256 or larger. If printed on a CREALITY K2 PLUS or PRUSA XL (350x350x350 or larger), the build volume…
Here is version 2 of the DE10 Nano Stack case. The Bunker! With thicker walls comes more filament usage but it can sustain a heavier assault from the dog snagging a cable and dragging it off the desk, down the hall and halfway down the…
Here is version 3 of the DE10 Nano Stack case. The Cube! With space for a 90mm fan, this rugged cube-shaped block of printed plastic armour should keep your DE10 cool and well protected. Like the bunker version before it, it is a fit and…
So you finally got the MiSTer FPGA thingy, the add-on boards have arrived and you have carefully built it... All wrong. Slowly pulled it apart then built it again, forgot the battery clock part... Urgh. Disassembled it again and wondered…
You can find my prints and creations for sale here: www.etsy.com/shop/HugoCraft I have the DE10 Nano so I can run the cores available on github under the MiSTer project. Since I'm waiting on the SDRAM addon and IO Board I wanted to still…
Requires one wheel and two inserts to be printed and glued into the wheel. Superglue worked for PETG prints. Printed using 15% honeycomb infill with 3 perimeters at 0.2 mm layer height using 0.4 mm nozzle. Printed on Prusa XL. In theory…
30mm fan cover for the DE10-Nano. The fan is positioned directly on top of the FPGA-SoC. Allows access to all GPIO, Arduino headers, ADC header, user switches, buttons and LEDs.
The bearing grinder jig used to grind the bearings used in the VDE100 extruder. Remixed from Tom Brazier's tool to change the thread to fit my DREMEL 3000, though I believe most Dremels use the same thread (¾-12) so it likeley fits most…
You can find my prints and creations for sale here: www.etsy.com/shop/HugoCraft Remixed my original fan plate to use a 30mm fan that is more commonly used with raspberry pi cases. The fans I purchased came with 16mm long bolts and nuts so…
sliced to fit on mk4s bed
M3 offset couplers to mount a Terasic DE10 to a JammASD. Modelled with 4.1mm holes which should result in a 4mm hole after shrinkage etc to suit M3 brass inserts that have a 3.9mm lead. These are the inserts I used >…
I really wanted to have an all-in-one type console that had an NFC card slot to launch games and this ejector mechanism is great. I combined it with the footprint of the DE10 Nano stack - MiSTer project CUBE case. To keep things very…
Finally, a solution for mounting a Raspberry Pi inside a PC case! This interface plate allows you to mount from one to four Raspberry Pi computers on an 'ATLANTIS for MiSTer' carrier board. The mount has been designed to work with RPi…
I needed to use a right-angle USB cable to keep things clean and not sticking out the sides of the cube, so I made this remix. Print as you did with Side1, and everything should work fine. Made to work with this model: I used this USB cable
I needed to use a right-angle USB cable to keep things clean and not sticking out the sides of the cube, so I made this remix. Print as you did with Side1, and everything should work fine. Made to work with this model: I used this USB cable
I really wanted to have an all-in-one type console that had an NFC card slot to launch games and this ejector mechanism is great. I combined it with the footprint of the DE10 Nano stack - MiSTer project CUBE case. To keep things very…
I needed to accommodate A/V Pro v9.2 IO board and AV Board v1.2 so I made this remix. Print as you did with Side2, and everything should work fine.
Recommended to print top-down so they are nice and flat. I used a smooth PEI sheet and PLA to be extra sticky. Just lay them on top of the buttons and put the lid on the cube, and you're good to go!
