Liczymy pasujące modele…
This is my kit card interpretation of the TIE Defender. Check out my other models printed giant sized featured on The 3D Printing Nerd We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
QuadBee - Defend Your Country! Slava Ukraini! All funds gained from donations and affiliate commission will be going to Ukraine. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where…
1/18 scale version of the original 1/10 by MrStolarsky. Pins were re-aligned and the whole board was made stackable. I test printed mine in resin and they came out awesome. I designed hangers for the Traxxas TRX-4M Defender, to hang a…
Print took around 20hrs at .16 layer height with %15 infill. The print will get stringing around the top pillars that can be removed with snips or a blow dryer. I'm really happy with the tolerances of the wheels, It doesn't have as much…
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
Wheels for the Traxxass TRX-4M Defender. All fit the original rubber and have the same offset as stock by default. Alternate versions with +X push the wheel out by Xmm, the wheel sits further out. -X brings the wheel closer to the body by…
A brick-wall of an owl that is fearless and calm. A funny DND idea I had. Collect them all! Over 20 Owls available!! COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Tree Supports on build plate only…
Front light guard for my Traxxas TRX-4M Defender. I printed mine in resin and glued them on. Print some spares as the thin tubes might get broken in print (0.5mm in diameter). I printed 4 at a time and one guard had one bar broken.…
I modeled these inner fenders to be lightweight (0.8mm Thick) and able to be installed with the factory screws. I recommend printing in PLA with a 0.4 nozzle with support and the bolting surface down on the print bed. All Parts are…
This is a model of the New Republic Defender-class Cruiser which appeared in the show Star Wars: Ahsoka. One ship of this type was called Vesper . Dimensions Length Width Height 99.6mm 19.5mm 16.4mm The scale is 10,000. Included is a…
seat mount for the traxxas trx4 designed for the defender. import 2x in to slicer and mirror 1 to get both sides
While in the Endor Imperial bunker scene in Return of the Jedi Leia uses the “SoroSuub Corporation (SC) X-30 “Lancer” target blast pistol”
After i designed Hingeep, my smaller print in place car I've got this idea - lets make model of real car, and I've chosen classical terrain car, Land Rover Defender 90, with look from 80's. As you can see on one picture, maybe box isn't…
This is my first upload to thingiverse and my first attempt to make a 3D model of a Land Rover Defender in Fusion 360 and print it on my new 3D printer. Biqu B1 from BigTreeTech. There is room for improvement but I'm still quite happy…
Model courtesy of the excellent folks at the Helldivers archive, uploaded as an STL for your optimal printing experience
Fender liners for the TRX-4M Defender. These attach with 4 screws per side. They work fine with the standard screws but I would recommend M2x6mm screws for the bumper attachments. These are cut to accommodate the mudflap mounts I made.…
Type-10 Defender model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
I took the model from RobRoy, a single fueltank/car box, and copy/past another one, glued them together in TinkerCad en made it fit my TRX4 Landrover Defender's roofrack. That's all I did. The model from RobRoy had a lid and holes to…
Not my file. Reuploaded for my collection Thingiverse thing:5752468 by Superknutselsmurf
I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…
This remix is focused on printability and durability. Parts has been tweaked or fully remodelled to better suit FDM manufacturing with regards to layer lines etc. Print each part with the orientation shown in the Schematics. The barrel is…
Land Rover Defender door lock bezel. I tried to make the design as similar as possible to the original. Requires supports to be printed. I got some pictures as example. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Replacement stereo surround of for the Land Rover Defender TD5. Print instructions Material: PETG Layer Height: 0.3mm Infil: 30% Perimeters: 4 Top Layers: 3 Bottom Laters: 3 Support: Yes
Not my files. Reuploaded for my collection Thingiverse thing:5787531 by alfringant
This is my version of the display strand for the TRX4m. I've added a small tray between the axles for screws or small accessory pieces. It's available for the Bronco and Defender with matching text on the side.
I reworked this model to fit RC Land Rover Defender (MN90, MN99, MN99S) rims. Printed with FIBERFLEX 40D and theyre a bit stiff. Print Settings Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 100% Filament brand: Fiberology Filament…
This is a simple to print exhaust model for a TRX-4M Defender. It approximately follows the position of a real exhaust, but with a bit of tuning look (big diameter straight tip). There are 2 models - main body to be mounted on frame-you…
I've already explained most everything in the “differences between remix and original section”, but this is the result of remixing the original XL phone mount to fit phones with large cases, in my case an iPhone 14 Pro Max with an…
Please use this responsibly.
This is my version of Rickert’s Spaceship which is described as looking like a yacht from the book The Defender. from the book “…He takes her to the fifth ship in line. A large double-decker beast that looks more like a yacht than a…
Customise your own fender vent via slicer with different infill patterns. In my case i used superslicer. Settings: 1 bottom layer, 0 top layers, 31% monotonic infill and 4 Vertical Shells. Quality on Top surfaces disabled. Material:…
https://www.thingiverse.com/thing:3820754 Thanks to ra100 for Pernisson to use this and create a Remix! Update: 1.0a The Slider Works! Seems good atm! You can print and assemble it. 1.0 Changed the Slide (compatible with 0.9 files) I…
Not my file. Reuploaded for my collection Thingiverse thing:5752440 by Superknutselsmurf
This is a set of blocks that can be used to recreate the Castles themed Blue Scale Mail minifigures at 500% scale. These were included in the Dual Defender set originally published in 1992. We've included stl files to create both…
I was tried to be super accurate with it (e.g. there is exactly the same amount rungs in nozzle with same space between them). I used videos of sign prop, photos i found over internet and free AprilStorm design. Side and barrel adjusters…
Designed from a set of photos, by an absolute amateur, therefore not the best model in the world but it bares a resemblance. It's about 1/50 scale, maybe not perfectly. Printed on my A1 Mini, mostly printed with the 0.4mm nozzle at 0.16mm…
Plasma Defender from Fallout: New Vegas. Thanks to Hyena_Of_Doom for their Fallout Small Energy Cell Replica. It was very nice to not have to recreate that part. Print instructions Items with X2 in the file name need to be printed twice.…
No particular printing instructions. I made mine in PLA and it have been working fine for a couple of years. Glue with Tec-7 or similar to the underside of the drain channel. v.1x is made in TinkerCAD, hence the rough construction. v2…
This is an insert for Defenders of the Wild. It was tricky fitting everything into the box with its own home, especially with the awkwardly-shaped border tiles for the map. Those are fit in two stacks on top of everything as shown in the…
Insect Glaive from Monster Hunter World Finally done with my Insect Glaive. Files have been uploaded to Thingivers and are available in the original location. Code Available Here: https://bit.ly/InsectGlaive Fusion 360 Link:…
Land Rover Defender, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Rims are inspired by classic Landy Rims
https://youtu.be/cQBp0F49uF4 - Assembly https://youtu.be/xquLJT72vxQ this A/C vent is for Land rover Defenders esse é o suporte para saida de ar condicionado para as land rover defenders Category: 3D Printing
What you see here is a set of windshield wipers with a license plate carrier meant for Trx TRX-4M Defender. These just clip onto the windshield frame. With this design there are more nails hit - wipers are 1 model, easier to print and…
Blanking plate for holes in the dashboard of the Land Rover Defender TD5 (This may fit other models) Print instructions Material: PETG Layer Height: 0.2mm Infil: 20% Perimeters: 2 Top Layers: 4 Bottom Laters: 4 Support: Yes
The Untamed Ox, Cast in Utility. This is not a vehicle. This is the unwavering companion of explorers, soldiers, and shepherds, cast in box-section steel. The Land Rover Defender 90 immortalizes the indomitable, go-anywhere spirit that…
Printed in PETG and stuck on using silicone sealant.
Wall mount bracket for the Unimog Technik 8110 Kit and the Lego Land Rover Defender 42110 Kit. The defender hook is about 6 mm shorter, but you can use the longer Unimog hook for both if you don't mind the front wheels of the Defender…
As often in cheap crawler kits, the required steering parts for a proportional servo are not included. The suspension could be better as well. Ans of course, some tuning parts are always nice. So this thing includes: Servo clamp Improved…
Since the original grills are too big for the I made these inspired by a design found on facebook but they now fit better. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.24 -0.1 Infill: 20%…
Silhouette della LandRover Defender 110. Consiglio di stamparla in pla nero per avere un maggior contrasto con il muro.
The radio holder in the defender 90 td5 was broken. So I made a replacement for it. It works also for the 110 defender.
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
This is a simple, Defender style car toy that allows the user to use a simple wrench to turn nuts and bolts to assemble components. The basic print requires 1 Body, 1 Frame, 4 Rims, 4 Tires, 4 Axle Nuts, 2 Bolts and 1 Wrench. The Bumper…
Lego Land Rover Defender Flat to Wall Mount Fully Rotateable. “Carpart” fixes to the underside of the Defender lego model and is fixed in place with 3 lego connectors (2780). Then use 2 x “doublepins” into the front and back suspension to…
This is a remake from another model of mine. I doubled it and made it lower. Although printed it weighs almost nothing, it's enough to make it more top heavy. I've learned that the hard way with the 3d printed fake rooftent. I made is…
Worked fine for me printed in PETG with a 0.28mm layer height. Making these clips in TPU improves their durability a lot. I am able to remove them without breaking Update V2 has a better printability and works better for TPU it has also a…
Land Rover Defender 90 rough size 210x108
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Hello, I have a Kayak with a paddle 1:10 for Traxxas TRX 4 Defender . A very nice accessory for a 1:10 RC car. The kayak is fully authentic in 1:10 scale. Including oars, it even floats. Good luck with the printing! I used PLA/PETG as the…
This is a license plate carrier for the TRX-4M Defender, with a light body on top and mounted with a rear light screw. As can be seen on photo, it fits perfectly between lights, doors and fuel tank holder.
Tlačil som - hlavnú časť 0,10 mm, ostatné diely 0,05 Nápravu (alebo os) treba buď urobiť z drôtu alebo ja som použil malý klinček, takto treba pripevniť aj zadné koleso (rezervu)
Recommend to use supports and 100% infill on ladder part. Need M3 screw for mounting the spare tire. For mountin in chassis using just existing holes/screws from orignal mount.
This is a Diamond Back Mountain Bike mount for the iPhone 7 and 8 Otterbox Defender Case. I was on a family vacation and we visited Martha's Vineyard for a day of bicycling. My sister-in-law was leading the way and made a wrong turn. She…
I design this part to mount my phone holder to Land Rover Dash profile. Its working perfect for me.
I started a game of Dungeons and Dragons with my friends. I am playing an artificer who gets a construct called a steel defender. Inspired by the players handbook and infinity train I decided to make my steel defender a corgi. Which…
A wallmount for the Lego Defender (42110). The model holds on the posture without change.
These mounts clip right onto the crossbar on the inside of the body of the TRX-4M Defender. I've included a file for the mudflaps as well but I just bought a $1 black binder and cut that to size. You could print out the mudflap and use…
Click-On shovel holder for trx4 defender body no zip ties anymore :D Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: .12 Infill: 100% Filament: 123-3D pla black Category: R/C…
Pictures from building are here: https://zaxcz.rajce.idnes.cz/Defender_110_HCP/
Back door for Bruder Defender.
Numberplate light for a defender (think it'll fit most series or defenders). Uses mounting holes for the actual light not a the central single crew like the original. longer machine screws will be needed (m5 pan head). Both plain and logo…
Print is quick with mostly walls, shouldn't need to set things outside of 2 perimeters and infill does not matter at all. I print them at 0.3mm layers
Need supports everywhere. The connection between ashtray mount and adapter is a tight fit so it may be wise to print outer perimeters first. 4x 3.5x16 mm wooden screws and 1x M6x20 with nut/wingnut needed. I printed the first one in PLA…
This is a replacement for the door lock housing on a defender 110. I copied from a OEM part and then looked at how to improve printability and strength since the OEM can crack quite easily when you disassemble the door. Print…
In our country its required to have a front license plate too, so I had to create some carrier for it :) This I suppose is the most unobstructive and simple to assemble solution. Just clip it on the front frame, either from front or from…
Roof Rack for a Tamiya Land Rover Defender 90 body (58657, 51607, 58700, 47478). You need 22x 2x6mm tapping screws and 8x M2x10mm screws, M2 washer and nuts. Drill all vertical holes of RoofRack and RoofRackTop with a 2mm drill. Drill all…
The AC vents on my '95 defender were broken and had missing pieces, so I created some spare parts to repair them. It is quite fiddly to dismantle them, and same goes for putting them together. make sure to drill out all the holes to 2,5…
Not my file. Reuploaded for my collection. Thingiverse thing:5752481 by pleinair37
Land Rover defender internal door lock button. These are ideal for reaching the button from the top if aftermarket seats or rail extensions are fitted. The top of the button protrudes from the top of the door card and has a groove to…
Hellou, # Design Concept The tools and plates are designed specifically for the Traxxas TRX-4 Defender, enhancing its aesthetic while ensuring practical storage aboard the model vehicle. Attention to detail and scale assures the…
Landrover defender keychain best printed right side up with organic supports
Hello, Welcome to my profile, full of models and miniatures :-) I have a Miniature Land Rover Defender for you for exhibition or diorama. Very nice model. It is suitable for coloring. My kids absolutely love it :-). It prints really well.…
Land Rover Defender | Print in Place This Toy is designed to have a print in place chassis and a separate body, which are held together with hook. Once the hook snaps in, there is no way to disassemble the toy. It also withstands harsh…
Radio mount for a Land Rover Defender 90. the side plates uses 4x m4 threaded inserts and a 2x Ø4 centering pins
Click-On sand ladder holder for trx4 defender body desinged for the traxxas sand ladders 8121 ---V2--- 03/12/2019 verticle and horizontal version (direction of the bodyclip) supports touching build plate only!! carefully drill out the…
These are tile holders for the various monster tiles in the board game Fate: Defenders of Grimheim You can print them with the combined stylized low-poly rock base, or standalone, or combined into your own base if you'd like. The prints…
Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg
Land Rover Defender 1998 Ashtray Blanking Plate Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament: Polymaker Polyflex PETG Black Notes: Land Rover Defender 1998 Ashtray…
Traxxas TRX4M Defender rear bumper. Nice and slim so it doesn't scrape like the stock one does. Now the tire/tire cover will rub next. But that's a problem for another day… 3 different styles to suit your fancy. One is 1 piece the other 2…
This is my version of Rickert’s Spaceship which is described as looking like a yacht from the book The Defender. from the book “…He takes her to the fifth ship in line. A large double-decker beast that looks more like a yacht than a…
Description Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model,…
Another concept gem. Redesigned classic Land Rover Defender. A complete original bodykit in "rat" racing style. Inspired by "mad max" post apocalypse cars. NOTE: No supports required. Keep the default orientation of the parts on…
____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
Not for direct printing. Use this model as reference for remixing the grip.
Its a tray for New Defender arm rest enjoy
Working from home seems like a great idea when it's by choice, but during these strange times of social distancing and self-isolation it can be hard to focus and get things done with the kids screaming and running around, teenagers…
