70 modeli
I remixed the original designs of blacktip and elumspe and made Brother P-Touch Label - and now also DYMO Label - Templates for 9mm Labels. Included are the qr-code, the materials, the written plate variant and the hatching lines like in…
USB micro-use/typeC cable or 5V dupont wire power supply Hardware: ESP8266 D1 Mini | W:23.2mm X H:34.3mm HLK-LD2420 | 20mmX20mm Dupont 2.54 X 2pcs (Optional) I have a spare Xiaomi motion sensor base, connecting to the case with a M3*8…
Can be used with https://github.com/Kranex/goskew Slice first model so that diagonal is largest possible to be measured precisely. Mark printer's axis and coordinate origin on printed tabs before removing print from printer. The diagonal…
If you're a cold-water diver, you most likely have a drysuit. And if you have a drysuit, you most likely have experienced the joyous feeling of that cold trickle running down your arm, back, neck or leg. The easiest way to detect a leak…
Support for DT3 USB Cable Tester (and lightning) Data Cable Detection board on AliExpress: https://fr.aliexpress.com/item/1005006910915098.html Edit 19/03/2025: Add a full cutout version.
Sensor Case with Presence Detection, CO2 Meter, Lux and Climate There are several sensor boards with multiple functions, but no one sensor has all functions on one board. That is why there still is a CCS811 CO2 eCO2 TVOC sensor in the…
A cover to take the tcs34725 sensor to read the failure status from the heating. Connected to a ESP8266 or D1mini and configurated at homeassistant to take the status from my heating. Green channel for all good Red channel for failure of…
I needed to recreate this module for use in a printed assembly for another project. Just thought I would share it. It's extremely close to the actual module that I have. Category: Robotics
This is an extension for the filament sensor on the ANYCUBIC Mega X. I like this filament holder here: https://www.thingiverse.com/thing:3020026/files and wanted to put it further back on the table to clear up some space in the front. I'd…
This is a simple riser block for the filament runout sensor on the CR-10 Smart. Height set for BMG Extruder. Should work with a number of other printers that use the same runout sensor, including the CR-6 SE.
Thanks to the ZeroBeast and jltx for this. Basically I wanted a solution for the Y-Axis shift after crash detection. You should read about it here, good stuff: https://github.com/prusa3d/Original-Prusa-i3/issues/76 However, life gets…
An update to my jam detecting filament sensor, now using a PINDA probe and magnets from the Prusa Mk3s. My original filament sensor eventually wore out when the filament wore through the switch. With the many Mk3s printers due to be…
This modified adapter-printer part changes the position of the steel ball in the filament sensor of the MK3S+ to fix detection problems. Background I was having failed detections with TPU filament because it was slightly compressed by the…
A holder for the Xiaomi YTC4043GL sensor, enabling you to attach it using either double-sided tape or a small screw. Printed with 0.15 quality setting on a Prusa MK4, snaps the sensor perfectly into position.
Give your Sonoff SNZB-03 motion sensor a "blinkered" view with this nifty 3D printed side cover! Perfect for making your sensor play a game of "I can't see you" in wider spaces. Slap it on, and voilà, no more alerts when your cat struts…
This model is designed to test the capability of your printer's built in AI spaghetti detection. It essentially prints a raft, a small post, then has a large floating area that generates a ton of spaghetti. Printing parameteres: Low…
A simple adapter that allows you to add a M12 metal detector to detect a failure in the primer feed ramp. This needs no modification of the original primer ramp, it is simply an extension that has a M12x1 thread to mount a sensor. I used…
This is a simple model of cylinder that prints using 0.05mm layer height and Prusament PETG temperature settings. When printed in enclosure (I'm using Prusa Box aka Printer Box) at 125% speed, MK3S+ detects a lot of false crashes as…
This project provides a comprehensive solution for the MK4/S MMU3 in an enclosure. The setup has been thoroughly tested to ensure easy filament preparation, smooth SpoolJoin operation, and effortless removal of leftover filament. The…
Description The smart feeding enclosure for cats ensures that each of our cats has safe and exclusive access to their own food. This is especially useful in households with multiple cats, where some may have health or behavioral issues…
I have a couple of old Snack King vending machines in the office - one for pop/soda cans and another for snacks/chips/bars. We needed to increase the pricing of the items, but I discovered they only had pricing options for a maximum of…
bmg extruder with filament detection. there is also a pcb file to fit the endstop switch.
This is a simple, effective interface mount designed to adapt the Anycubic Return Detection Module (from the Kobra 3 Combo / ACE Pro system) for use on any 3D printer or surface. The original sensor is built with a proprietary clip-in…
Please not the closed endcap has a slightly tighter tolerance, then the open one. Therefore the closed endcap is not made for removal. The open endcap is removable by slightly twisting it. The Pipe used in the picture is 50mm. The length…
Change the first version for correcting detection error. on gcode .
I was struggling to get the filament to go through the Creality filament detection sensor and then into the servo for actual extrusion, so I whipped together this connector to help bridge that gap. Just slide it on and the holes should…
Modification du module de détection du filament sur geeetech mizar S afin de contrer l'usure de ce dernier. J'ai donc modélisé une pièce qui vient en lieu et place sur la visseries d'origine. Afin de pouvoir installer un tube en téflon de…
This is a first version to be tested and might be upgraded, if you try it, send feedback so I can keep upgrading. Design to hold Omron D2F-01 A simple M3 screw is used as a lever, two 3*5 magnet hold the assembly locked, another M3 can be…
I printed the prototype with PETG.
using cheap typical titan extruder part
## Motivation I have the BK-G4M Meter. The magnetic field is to weak to trigger an reed-contact. Thus a hall-sensor ist used. ## Platform The platform is running on Tasmota 15.2.0 and uses a berry script (see berry_Version_xxx.txt) ##…
I decided to keep it simple ... well, I can only keep it simple with my limited Fusion360 skills ;) The solar panel will be connected with 2 zip ties to the corner mount. The corner mount will be screwed onto the corner. The screw holes…
Audi A6 allroad level detection rod support for 2013 year air suspension. Don't know if this works on other models also. With this fixed broken rod without need of change of component.
I based my design on a thing by markj113. The switch is flipped to the other side to accommodate a ball bearing filament guide. This fits a standard KW3 microswitch with a long roller arm. Runout detection can be wired into pin 27 or pin…
This device can detect falls and call for help.
Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector
I recently bought a G3061 PD65W Hot Plate to help with SMD soldering, and decided to add a VL53L0X ToF sensor to automatically start and stop the heating when it detects a PCB. Requires: 1x G3061 PD65W Hot Plate:…
Simple case to protect your DT3
No support required! This filament guide model is suitable for any printer where the spool is located at the top of the printer. It is designed to guide the filament entry to the filament break sensor, enhancing filament traction forces…
Finally got around to build something to deal with running out of filament when printing from Octoprint (not direct from SD card) on my Ender 3 Pro. I created this bracket to use with the following switches:…
Here is my remix of: https://www.thingiverse.com/thing:4699840 for Anycubic Mega Zero It is necessary to replace the extruder screws with 40mm long ones. The Runout sensor can be left complete with no need to remove the base but only to…
This is a SiPM and scintillator holder meant to mount on a 0.500" diameter optical stand, used for cosmic ray detection. The pictures are labeled 01 through 08 showing the process I used to go from print stage to assembled with a SiPM…
La majorité des systèmes de détection d'eau fonctionnent dans un volume, et non sur une surface. Si l'eau est très douce, saupoudrer un peu de sel de table dans l'enceinte et ça fonctionne très bien. Couplé à un module NodeMCU (wifi) et…
Replacement sensor cover -> automatic detection of accessories for the WHN 13 horizontal boring machine.
I want to be able to print without babysitting, so for an added level of safety and peace of mind when I am not in the immediate vicinity of the printer, I opted to use the smoke detection system found here Smart Micro™ - Pioneering Tech…
With this model, you can mount your filament detector higher on the rack, allowing you to easily use your new Upgrade Filament Dryer Box Pro. https://a.co/d/0dwxXRpD Use M3 Brass Insert Nuts - M3x5x4mm https://a.co/d/02uH89Av
This is my first designed case for the Alphahound AB+G radiation detector. The model comes with optional front, back and USB covers. My Alphahound is one of my EDC. While the body of the Alphahound is robust, I carry it in my pocket and…
A spacer to line up the stock Adimlab Gantry-S filament detector with a WINSINN dual gear extruder. Category: 3D Printer Parts
Case for two voltage control relays 12-99.99v with external connector https://acesse.one/6XdGg https://acesse.one/cDaXH
Mask to adapt the detection angles and range for the Tuya IH012-RT01 Zigbee Motion sensor. I created this model to mount the sensor above my dining table, so that the light above the table is turned on when we are sitting at the table.…
This is a extruder clip for the E3D Hemera that will allow it to connect to the Palette 2. I wanted to add run out detection for when running without the Palette 2 so I have added the ability to have the run out detection switch mounted…
PSU cover for the typical 12V MW style power supply used on cheap 3d printers. You need 3 screws (probably already leftover in the kit of your printer). There is an extra space for 220DET module: https://s.click.aliexpress.com/e/\_dUBbk7f…
I fiddled around with two designs of filament width sensors (InFiDel from “Made with layers” : https://www.printables.com/model/57154-infidel-inline-filament-diameter-estimator-lowcost and from “Janar”:…
This simple 3d printed plate can be used to hold area monitors. It was specifically designed to work with RDC OSL badges. I attached them to walls using command strips of a masking tape/super glue sandwich. They make it quick and easy to…
A holder for detecting filament using a microswitch. Used for pausing prints when filament runs out. If you want to put it next to the filament roll (easier, no need to route wiring through signal chain, but a lot of filament remains…
Using this as a belay extruder to feed my G2E/SB. My filament path to the filament rack is 3+ meters so reliable extrusion was an issue. This solved that. I also wanted a filament runout sensor at my entry point. BOM Omron D2F-L3-D3…
Snap lugs in the tray of the dust compartment on a Vorwerk Kobold VR100 vacuum cleaner robot were broken, so it was not possible to use the cleaner anymore, which was otherwise still working fine. There are no official solutions and it's…
This model serves as inspiration for your own design. it is unlikely that this exact dimensions or design will suit your situation. In our coastal environment the salty fog and rain drastically shortens outdoor lights' lifetime. The…
What it is NoodleWatch is a small box on the outside of the CORE One door. It hold Coralboard SL with its sensor HAT and camera. When frame show spaghetti, the print is paused through PrusaLink. How it works Every 5 sec the camera takes a…
Was made to make detecting 2.5 gallon water bottles for labeling more uniform by detecting the cap instead of the leading edge of the bottle. Uses the original sensor and reflectors
See www.BirdWatchAI.com for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit. See the live community feed of feeders currently running the BirdwatchAI software at…
See www.BirdWatchAI.com for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit. See the live community feed of feeders currently running the BirdwatchAI software at…
Be advised; this is just an idea. I don't have the brainpower to figure this out on my own. The end goal is to "just throw on a spool" and the RFID via magic tells the printer what material is (about to be) loaded. There are many projects…
This model serves as inspiration for your own design. it is unlikely that this exact dimensions or design will suit your situation. In our coastal environment the salty fog and rain drastically shortens outdoor lights' lifetime. The…
Audi A6 allroad level detection rod support for 2013 year air suspension. Don't know if this works on other models also. With this fixed broken rod without need of change of component.
I decided to keep it simple ... well, I can only keep it simple with my limited Fusion360 skills ;) The solar panel will be connected with 2 zip ties to the corner mount. The corner mount will be screwed onto the corner. The screw holes…
Please not the closed endcap has a slightly tighter tolerance, then the open one. Therefore the closed endcap is not made for removal. The open endcap is removable by slightly twisting it. The Pipe used in the picture is 50mm. The length…
Prusa Referral Program - Time to upgrade your Printer? Use the following @ChrisE referral links to claim your free PETG Spool with the purchase of any Core1+ Gen2 / INDX / L+ / XL+ printer from the Prusa3D Store. Prusa account required.…
