Liczymy pasujące modele…
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Pour accompagner le dispositif de propulsion, une signalisation était…
Wydruk około 2,37 €–2,89 € nettoWstępna wycena jednego wariantu
Overview I designed this as part of a budget F1 in Schools track and timing system back in 2015. The official Denford system is of high quality but very expensive. Beyond the budget for most schools. The original system is seen here…
A dragster made to be powered by a standard CO2 cartridge for a summative project in grade 9. The original design was made out of wood and has a few differences due to the tools used to manufacture it and to reduce some weight, but I also…
The Rocket Dragster is designed to use standard Estes model B and C rocket engines set into the rear of the craft. Print off 4 wheel hubs and press fit them into standard 608 bearings (https://a.co/d/d0hcxeg) to giving it less frictional…
The new and improved Dragster from Brick3D - now lower, sleeker and meaner! This set is chuck-full of new parts, including slimmer wheels, a new T-shape and some very specific triangular bases. Keep an eye out for the new color-ways we'll…
This is a dragster style carburetor scoop I designed for my boat. It requires quite a bit of post-processing to make it look finished. The Mounting Plate was cut from ¼ inch polycarbonate on a CNC router. The rest of the parts are…
After learning basic Blender modelling, I decided to take a crack at my first #3DTrenchy remix. I couldn't figure out how to make the support wheels print in place, if you have an idea, tell me down in the comments, I might implement it.…
These are designed for use with 1/8 inch metal axils. You can use either 1/8 inch aluminum rod (as in the picture) or 1/8 inch brazing rod. Some scaling might be needed for a snug fit with the axles depending on the exact axle diameter.
I got the steering wheel off of thingiverse. Wheels spin and you can add a wheelie bar and parachutes.
CO2 Dragster Front Wheels for 3.2mm axil
Remixed from the Edge of 3D RMRRF Dragster Wing Towers, same position but lowered by 60mm Thank you Scott, Edge of 3D for the original design
This is my CO2 Dragster Race Car that is fully 3D printed and ready to assemble and race. It can be assembled fully without any external hardware or adhesives. This car was designed and constructed for the TSA Dragster Design contest. It…
This is a remix of the rear axle from this model . To complete this mod, you must be able to tap eight m5 threads into the flange coupling. We found it tedious to balance the rear wheels of our original car build due to the uneven nature…
Remix of the E3dBuggy model, towards a dragster, overhangs of 35 degrees, it can be done without supports, you should put only 0.15 of height in the upper wing area. Fun to modify the model.
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
No Drill Mod Replaces the Gear for M4 bolts and a Clamp to hold the Gear to the Coupler BOM 4x M4x12 Button Head - Large 30T Gear to Flange 4x M4 Heat Set Inserts (4x6.31x5.5 / M4S)
Model dimensions: - outer diameter - 17 mm - width - 7.2 mm
Model dimensions: - diameter - 17 mm - width - 4.8 mm
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Pour le début de celle-ci, j’ai commencé par le système de sustentation…
This is a remix of the frame and body from this model . When I built the first dragster for RMRRF 2023 we had to dismantle it so that we could get it to Colorado safely by plane. While working on that, my friend and I had the idea of…
a moldel I made for my friend as a Birtday present. Just a really good looking small Wallart
Model dimensions: - outer diameter - 16 mm - width - 5.4 mm
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Ensuite, je me suis penché sur l’organisation de la partie RC avec en…
Model dimensions: - diameter - 19 mm - width - 4.6 mm
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Pour la suite de celle-ci, j’ai continué par le dispositif de…
These are meant to attach to paper rockets and paper dragsters. They are modeled for use with ½ inch PVC rollers (0.840 OD), but could easily be scaled for other sized rollers. On the rear of the nose cone is a small hole meant for a size…
Model dimensions: - diameter - 17 mm - width - 4.8 mm
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Cela étant, j’ai continué sur l’organisation de la partie RC avec en…
model of a pinewood derby dragster doesn't move sorry
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Afin de finaliser ce projet, j’ai ajouté un couvercle fixe avec…
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Enfin, j’ai terminé l’organisation de la partie RC avec en troisième…
Just a drag racing dragster (the wheels do not move)
Adds a Backing Clamp for the bolts of the Tire Hub to attach through the Flange and secure Dragster Tires Check clearance in your Wheel Hub/Tire choice, these are nearly exact fit to the flange Tune Shrinkage M4 Bolts to fit your setup,…
Raise the Fans outside the motors magnetic field and allow them to run at full power 8x M2.5x25 Button head screws use blue loctite Link to cooler used https://a.co/d/7xBOLFR
Currently Experimental Remixed from the Original Steer Axle and Steering Arms Ream out the top holes with an M3 screw or M3 reamer Add an M2x6 Socket Head self tapping screw to the bottom of each Steering Arm, Any longer and the screw…
This is a remix of Vit Budina's Suzuki Jimny that I made into a dragster.
Turn your Otto into a straight-line speed machine with this Top Fuel Dragster kit remix ! This design transforms the classic Otto robot into a miniature drag racing beast, inspired by real Top Fuel dragsters. The kit focuses on bold…
uhhh print in high detail to get the best results for racing
This is a lower steering brace for the Top Fuel 3D printed dragster commonly raced at the RepRap Festivals. This part will increase control and stability, while also reducing breaking front steering parts. A hole must be drilled…
Made in Onshape doesn't have any wheels so you have to print those separately
Disclaimer. this only works on belt drives and not the shaft drives. Recommended material (PETG, PET, ABS, ASA) Recommended settings (infill 10-15%) (walls 3-4) extra hardware (gopro thumb screw, M5 nut, and a gopro cam)
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
I got the steering wheel off of thingiverse. Wheels spin and you can add a wheelie bar and parachutes.
Disclaimer. this only works on belt drives and not the shaft drives. Recommended material (PETG, PET, ABS, ASA) Recommended settings (infill 10-15%) (walls 3-4) extra hardware (gopro thumb screw, M5 nut, and a gopro cam)
